Related references
Note: Only part of the references are listed.Structure and Corrosion Behavior of TiO2 Thin Films Deposited by ALD on a Biomedical Magnesium Alloy
Aneta Kania et al.
COATINGS (2021)
On the evaluation of ALD TiO2 , ZrO2 and HfO2 coatings on corrosion and cytotoxicity performances
Mirco Peron et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Enhancement of stress corrosion cracking of AZ31 magnesium alloy in simulated body fluid thanks to cryogenic machining
M. Peron et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
The effect of Equal Channel Angular Pressing on the stress corrosion cracking susceptibility of AZ31 alloy in simulated body fluid
Mirco Peron et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Comparing physiologically relevant corrosion performances of Mg AZ31 alloy protected by ALD and sputter coated TiO2
Mirco Peron et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Improving stress corrosion cracking behavior of AZ31 alloy with conformal thin titania and zirconia coatings for biomedical applications
M. Peron et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Construction of TiO2/silane nanofilm on AZ31 magnesium alloy for controlled degradability and enhanced biocompatibility
Lei Huang et al.
RARE METALS (2019)
A combined coating strategy based on atomic layer deposition for enhancement of corrosion resistance of AZ31 magnesium alloy
Xiangmei Liu et al.
APPLIED SURFACE SCIENCE (2018)
Characterisation of anodic oxide films on zirconium formed in sulphuric acid: XPS and corrosion resistance investigations
Maciej Sowa et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2017)
Fundamentals and advances in magnesium alloy corrosion
M. Esmaily et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Mg and Its Alloys for Biomedical Applications: Exploring Corrosion and Its Interplay with Mechanical Failure
Mirco Peron et al.
METALS (2017)
Atomic layer deposited ZrO2 nanofilm on Mg-Sr alloy for enhanced corrosion resistance and biocompatibility
Qiuyue Yang et al.
ACTA BIOMATERIALIA (2017)
Enhanced corrosion resistance and biocompatibility of AZ31 Mg alloy using PCL/ZnO NPs via electrospinning
Jinwoo Kim et al.
APPLIED SURFACE SCIENCE (2017)
Properties of TiO2 thin films deposited by rf reactive magnetron sputtering on biased substrates
Sawsen Nezar et al.
APPLIED SURFACE SCIENCE (2017)
Growth, in vitro biodegradation and cytocompatibility properties of nano-hydroxyapatite coatings on biodegradable magnesium alloys
Huawei Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The effect of wettability on corrosion resistance of oxide films produced by SILAR method on magnesium, aluminum and copper substrates
Y. Akaltun et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Hemolysis and cytotoxicity mechanisms of biodegradable magnesium and its alloys
Zhen Zhen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Corrosion behavior of metallic materials in biomedical applications. II. Stainless steels and Co-Cr alloys
Bruce G. Pound
CORROSION REVIEWS (2014)
The behaviour of magnesium during free corrosion and potentiodynamic polarization investigated by real-time hydrogen measurement and optical imaging
M. Curioni
ELECTROCHIMICA ACTA (2014)
Thermal Expansion of HfO2 and ZrO2
Ryan P. Haggerty et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
In-vitro characterization of stress corrosion cracking of aluminium-free magnesium alloys for temporary bio-implant applications
Lokesh Choudhary et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Improvement to the Corrosion Resistance of Ti-Based Implants Using Hydrothermally Synthesized Nanostructured Anatase Coatings
Martina Lorenzetti et al.
MATERIALS (2014)
Comparison of the corrosion behaviour of AZ31B magnesium alloy under immersion test and potentiodynamic polarization test in NaCl solution
D. Thirumalaikumarasamy et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2014)
Antibacterial activity of TiO2 nanotubes: Influence of crystal phase, morphology and Ag deposition
Huirong Li et al.
APPLIED SURFACE SCIENCE (2013)
Role of chlorides on pitting and hydrogen embrittlement of Mg-Mn wrought alloy
V. S. Raja et al.
CORROSION SCIENCE (2013)
Stress corrosion cracking of a recent rare-earth containing magnesium alloy, EV31A, and a common Al-containing alloy, AZ91E
Bharat S. Padekar et al.
CORROSION SCIENCE (2013)
Corrosion fatigue of biomedical metallic alloys: Mechanisms and mitigation
Renato Altobelli Antunes et al.
ACTA BIOMATERIALIA (2012)
Chemical and electrochemical characterization of TiO2/Al2O3 atomic layer depositions on AZ-31 magnesium alloy
E. Marin et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2012)
Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance
Meisam Salahshoor et al.
MATERIALS (2012)
Corrosion behavior of the composite ceramic coating containing zirconium oxides on AM30 magnesium alloy by plasma electrolytic oxidation
Feng Liu et al.
CORROSION SCIENCE (2011)
Design strategy for new biodegradable Mg-Y-Zn alloys for medical applications
Anja C. Haenzi et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2009)
MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants
Bruno Zberg et al.
NATURE MATERIALS (2009)
Low-temperature biomimetic formation of apatite/TiO2 composite coatings on Ti and NiTi shape memory alloy and their characterization
T. Sun et al.
APPLIED SURFACE SCIENCE (2008)
Cohesive energy, properties, and formation energy of transition metal alloys
M. A. Turchanin et al.
POWDER METALLURGY AND METAL CERAMICS (2008)
Thermal expansion of anatase and rutile between 300 and 575 K using synchrotron powder X-ray diffraction
D. R. Hummer et al.
POWDER DIFFRACTION (2007)
Control of biodegradation of biocompatable magnesium alloys
Guangling Song
CORROSION SCIENCE (2007)
Calcium phosphate cements as bone drug delivery systems: A review
M. P. Ginebra et al.
JOURNAL OF CONTROLLED RELEASE (2006)
How useful is SBF in predicting in vivo bone bioactivity?
T Kokubo et al.
BIOMATERIALS (2006)
Influence of surface morphology on corrosion and electronic behavior
W Li et al.
ACTA MATERIALIA (2006)
A critical review of the stress corrosion cracking (SCC) of magnesium alloys
N Winzer et al.
ADVANCED ENGINEERING MATERIALS (2005)
In vivo corrosion of four magnesium alloys and the associated bone response
F Witte et al.
BIOMATERIALS (2005)
Thermal expansion coefficient of yttria stabilized zirconia for various yttria contents
H Hayashi et al.
SOLID STATE IONICS (2005)
Reversible wettability control of TiO2 surface by light irradiation
M Miyauchi et al.
SURFACE SCIENCE (2002)
Preparation, microstructure and photocatalytic activity of the porous TiO2 anatase coating by sol-gel processing
JG Yu et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2000)
Share Paper
