4.8 Article

High Color Purity and Efficient Green Light-Emitting Diode Using Perovskite Nanocrystals with the Size Overly Exceeding Bohr Exciton Diameter

Related references

Note: Only part of the references are listed.
Review Chemistry, Physical

Metal halide perovskites for light-emitting diodes

Xiao-Ke Liu et al.

Summary: Perovskite emitters have shown promising optoelectronic properties suitable for light-emitting applications, with rapid progress in the development of PeLEDs reaching external quantum efficiencies of over 20%. The key focus is on improving the performance, stability, and reducing toxicity hazards of PeLEDs.

NATURE MATERIALS (2021)

Article Multidisciplinary Sciences

Perovskite QLED with an external quantum efficiency of over 21% by modulating electronic transport

Tao Fang et al.

Summary: This study demonstrates green perovskite QLEDs with improved efficiency and operational lifetime by balancing charge injection, showing high color saturation and excellent external quantum efficiency. Modulating charge balance significantly enhances the operational lifetime of the devices, further highlighting the potential of perovskite QLEDs for practical applications.

SCIENCE BULLETIN (2021)

Article Optics

Comprehensive defect suppression in perovskite nanocrystals for high-efficiency light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, a one-dopant alloying strategy was employed to enhance electroluminescence efficiencies of metal halide perovskite nanocrystals (PNCs) by reducing defect formation and enhancing charge carrier confinement. Surface-stabilizing agents and bromide vacancy healing agents were utilized to decrease defect density and improve carrier confinement, resulting in significant enhancement in performance.

NATURE PHOTONICS (2021)

Article Multidisciplinary Sciences

Reducing the impact of Auger recombination in quasi-2D perovskite light-emitting diodes

Yuanzhi Jiang et al.

Summary: By reducing the exciton binding energy of materials and employing a polar molecule for treatment, the Auger recombination effect in perovskite materials has been successfully suppressed, leading to efficient PeLEDs devices with outstanding photoluminescence quantum yields. Additionally, a record luminance of 82,480 cd m(-2) was achieved due to the suppressed efficiency roll-off, making it one of the brightest visible PeLEDs to date.

NATURE COMMUNICATIONS (2021)

Review Chemistry, Multidisciplinary

Alkylammonium Halides for Facet Reconstruction and Shape Modulation in Lead Halide Perovskite Nanocrystals

Narayan Pradhan

Summary: This article reviews the interactions of alkyl ammonium ions on the surface of perovskite nanocrystals and their influence on surface reconstructions. It primarily discusses the effects on phase stability, brightness enhancement, and new facet formation in CsPbBr3 nanocrystals. Additionally, the transformation of multifaceted polyhedron nanocrystals and the formation of armed and step-armed structures under different conditions are explored.

ACCOUNTS OF CHEMICAL RESEARCH (2021)

Article Multidisciplinary Sciences

Ligand-engineered bandgap stability in mixed-halide perovskite LEDs

Yasser Hassan et al.

Summary: By utilizing multidentate ligands to treat mixed-halide perovskite nanocrystals, efficient and color-stable red electroluminescence with a wavelength centered at 620 nanometers and an external quantum efficiency of 20.3% has been achieved. The key function of the ligand treatment is to 'clean' the nanocrystal surface by removing lead atoms, which suppresses the formation of iodine Frenkel defects and halide segregation. This work demonstrates the sensitivity of metal halide perovskites to surface properties and provides a pathway to control surface defect formation and migration, crucial for achieving bandgap stability for light emission and potentially impacting other optoelectronic applications.

NATURE (2021)

Article Optics

Suppression of temperature quenching in perovskite nanocrystals for efficient and thermally stable light-emitting diodes

Mingming Liu et al.

Summary: Fluoride-treated CsPbBr3 nanocrystals exhibit near unity emission efficiency at temperatures up to 373 K, with constant decay kinetics. The treatment leads to surfaces rich in fluorine with wider energy gaps than the core, suppressing carrier trapping and improving thermal stability. Devices incorporating these nanocrystals show low turn-on voltage and high external quantum efficiency, with nearly 80% efficiency maintained at high temperatures, offering a promising pathway for high-performance light-emitting diodes based on perovskite nanostructures.

NATURE PHOTONICS (2021)

Article Chemistry, Multidisciplinary

All-Inorganic Quantum-Dot LEDs Based on a Phase-Stabilized α-CsPbI3 Perovskite

Ya-Kun Wang et al.

Summary: The all-inorganic nature of CsPbI3 perovskites enhances stability in perovskite devices. Inorganic ligand exchange leads to CsPbI3 QD films with superior phase stability and increased thermal transport. LEDs with KI-exchanged QD films exhibit increased thermal transport and higher operating stability compared to control devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Multidisciplinary Sciences

High-performance large-area quasi-2D perovskite light-emitting diodes

Changjiu Sun et al.

Summary: The performance of perovskite light-emitting diodes tends to decline as the active area increases, with severe phase-segregation identified as the cause. The introduction of L-Norvaline to construct an intermediate phase has successfully suppressed the phase-segregation, resulting in highly-efficient large-area quasi-2D films.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Potassium Bromide Surface Passivation on CsPbI3-xBrx Nanocrystals for Efficient and Stable Pure Red Perovskite Light-Emitting Diodes

Jun-Nan Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Multidisciplinary

In Situ Ligand Bonding Management of CsPbI3Perovskite Quantum Dots Enables High-Performance Photovoltaics and Red Light-Emitting Diodes

Junwei Shi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Nanoscience & Nanotechnology

Bipolar-shell resurfacing for blue LEDs based on strongly confined perovskite quantum dots

Yitong Dong et al.

NATURE NANOTECHNOLOGY (2020)

Article Chemistry, Physical

Suppressing Auger Recombination in Cesium Lead Bromide Perovskite Nanocrystal Film for Bright Light-Emitting Diodes

Ji-Song Yao et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Article Engineering, Electrical & Electronic

Efficient light-emitting diodes from mixed-dimensional perovskites on a fluoride interface

Baodan Zhao et al.

NATURE ELECTRONICS (2020)

Article Chemistry, Multidisciplinary

α-Halo Ketone for Polyhedral Perovskite Nanocrystals: Evolutions, Shape Conversions, Ligand Chemistry, and Self-Assembly

Suman Bera et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Multidisciplinary Sciences

Transient circular dichroism and exciton spin dynamics in all-inorganic halide perovskites

Weijie Zhao et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Multidisciplinary

Zn-Alloyed CsPbI3 Nanocrystals for Highly Efficient Perovskite Light-Emitting Devices

Xinyu Shen et al.

NANO LETTERS (2019)

Article Chemistry, Multidisciplinary

CsPbBr3 Quantum Dots 2.0: Benzenesulfonic Acid Equivalent Ligand Awakens Complete Purification

Dandan Yang et al.

ADVANCED MATERIALS (2019)

Article Metallurgy & Metallurgical Engineering

Copper-Doped Zinc Oxide Nanoparticles for the Fabrication of white LEDs

Aravapalli Vanaja et al.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2019)

Article Chemistry, Multidisciplinary

Arm Growth and Facet Modulation in Perovskite Nanocrystals

Lucheng Peng et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Editorial Material Optics

Best practices for measuring emerging light-emitting diode technologies

Miguel Anaya et al.

NATURE PHOTONICS (2019)

Article Nanoscience & Nanotechnology

Efficient and Color-Tunable Quasi-2D CsPbBrxCl3-x Perovskite Blue Light-Emitting Diodes

Kun-Hua Wang et al.

ACS PHOTONICS (2019)

Article Chemistry, Multidisciplinary

Charge Transport between Coupling Colloidal Perovskite Quantum Dots Assisted by Functional Conjugated Ligands

Jinfei Dai et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Multidisciplinary

Benzoyl Halides as Alternative Precursors for the Colloidal Synthesis of Lead-Based Halide Perovskite Nanocrystals

Muhammad Imran et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Review Chemistry, Physical

Genesis, challenges and opportunities for colloidal lead halide perovskite nanocrystals

Quinten A. Akkerman et al.

NATURE MATERIALS (2018)

Review Chemistry, Multidisciplinary

Perovskites for Light Emission

Li Na Quan et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Physical

Characterization of the Ligand Capping of Hydrophobic CdSe-ZnS Quantum Dots Using NMR Spectroscopy

Birong Zeng et al.

CHEMISTRY OF MATERIALS (2018)

Article Chemistry, Physical

Advances in Quantum-Confined Perovskite Nanocrystals for Optoelectronics

Lakshminarayana Polavarapu et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

The Evolution of Quantum Confinement in CsPbBr3 Perovskite Nanocrystals

Justinas Butkus et al.

CHEMISTRY OF MATERIALS (2017)

Article Chemistry, Physical

Colloidal-quantum-dot photovoltaics using atomic-ligand passivation

Jiang Tang et al.

NATURE MATERIALS (2011)