Related references
Note: Only part of the references are listed.Effect of GDM Pairing on PEMFC Performance in Flow-Through and Dead-Ended Anode Mode
Yannick Garsany et al.
MOLECULES (2020)
Understanding the interplay between cathode catalyst layer porosity and thickness on transport limitations en route to high-performance PEMFCs
M. B. Sassin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Membrane electrode assemblies for PEM fuel cells: A review of functional graded design and optimization
Lei Xing et al.
ENERGY (2019)
Comparative investigation into the performance and durability of long and short side chain ionomers in Polymer Electrolyte Membrane Fuel Cells
Krishan Talukdar et al.
JOURNAL OF POWER SOURCES (2019)
Formulation of carbon black-ionomer dispersions for thin film formation in fuel cells
Eva Hoffmann et al.
PARTICUOLOGY (2019)
Multidimensional nanostructured membrane electrode assemblies for proton exchange membrane fuel cell applications
Guoliang Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Impact of the Anode Catalyst Layer Design on the Performance of H2O2-Direct Borohydride Fuel Cells
Rachel M. E. Hjelm et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
The impact of short side chain ionomer on polymer electrolyte membrane fuel cell performance and durability
Samaneh Shahgaldi et al.
APPLIED ENERGY (2018)
Fabrication of highly effective self-humidifying membrane electrode assembly for proton exchange membrane fuel cells via electrostatic spray deposition
Beom-Soo Koh et al.
ELECTROCHEMISTRY COMMUNICATIONS (2018)
Cathode catalyst layer design with gradients of ionomer distribution for proton exchange membrane fuel cells
Samaneh Shahgaldi et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Improving PEMFC Performance Using Short-Side-Chain Low-Equivalent-Weight PFSA Ionomer in the Cathode Catalyst Layer
Yannick Garsany et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Boosting Fuel Cell Performance with Accessible Carbon Mesopores
Venkata Yarlagadda et al.
ACS ENERGY LETTERS (2018)
High power, Low-Pt membrane electrode assemblies for proton exchange membrane fuel cells
Yannick Garsany et al.
JOURNAL OF POWER SOURCES (2018)
Ink Solvent Dependence of the Ionomer Distribution in the Catalyst Layer of a PEMFC
Alin Orfanidi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
The Role of Compressive Stress on Gas Diffusion Media Morphology and Fuel Cell Performance
Robert W. Atkinson et al.
ACS APPLIED ENERGY MATERIALS (2018)
Fabrication Method for Laboratory-Scale High-Performance Membrane Electrode Assemblies for Fuel Cells
Megan B. Sassin et al.
ANALYTICAL CHEMISTRY (2017)
A Pt content and pore structure gradient distributed catalyst layer to improve the PEMFC performance
Licheng Ye et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Gradient design of Pt/C ratio and Nafion content in cathode catalyst layer of PEMFCs
Guang-Ying Chen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
The colloidal tool-box approach for fuel cell catalysts: Systematic study of perfluorosulfonate-ionomer impregnation and Pt loading
Jozsef Speder et al.
CATALYSIS TODAY (2016)
Three-dimensional reconstruction of coarse-dense dual catalyst layer for proton exchange membrane fuel cells
C. Y. Jung et al.
ELECTROCHIMICA ACTA (2016)
Effects of carbon supports on Pt distribution, ionomer coverage and cathode performance for polymer electrolyte fuel cells
Young-Chul Park et al.
JOURNAL OF POWER SOURCES (2016)
The catalyst layer and its dimensionality - A look into its ingredients and how to characterize their effects
Nada Zamel
JOURNAL OF POWER SOURCES (2016)
Impact of Compressive Stress on MEA Pore Structure and Its Consequence on PEMFC Performance
M. B. Sassin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Analysis of Inkjet Printed PEFC Electrodes with Varying Platinum Loading
S. Shukla et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Fabrication of High Performing PEMFC Catalyst-Coated Membranes with a Low Cost Air-Assisted Cylindrical Liquid Jets Spraying System
Xiong Peng et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Self-humidifying membrane electrode assembly with dual cathode catalyst layer structure prepared by introducing polyvinyl alcohol into the inner layer
Huagen Liang et al.
RSC ADVANCES (2016)
Design of an Advanced Membrane Electrode Assembly Employing a Double-Layered Cathode for a PEM Fuel Cell
GyeongHee Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
An impedance model for analysis of EIS of polymer electrolyte fuel cells under hydrogen peroxide formation in the cathode
Samuel Cruz-Manzo et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2015)
Tailored porosities of the cathode layer for improved polymer electrolyte fuel cell performance
A. Zlotorowicz et al.
JOURNAL OF POWER SOURCES (2015)
Effects of short-side-chain perfluorosulfonic acid ionomers as binders on the performance of low Pt loading fuel cell cathodes
Young-Chul Park et al.
JOURNAL OF POWER SOURCES (2015)
Influence of the ionomer/carbon ratio for low-Pt loading catalyst layer prepared by reactive spray deposition technology
Haoran Yu et al.
JOURNAL OF POWER SOURCES (2015)
Feasibility of in-plane GDL structuration: Impact on current density distribution in large-area Proton Exchange Membrane Fuel Cells
Lara Jabbour et al.
JOURNAL OF POWER SOURCES (2015)
A novel cathode structure with double catalyst layers and low Pt loading for proton exchange membrane fuel cells
Yanling Qiu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Impact of Platinum Loading and Catalyst Layer Structure on PEMFC Performance
Jon P. Owejan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Analysis of the SO2 Contamination Effect on the Oxygen Reduction Reaction in PEMFCs by Electrochemical Impedance Spectroscopy
Y. Zhai et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
PEMFC Catalyst Layers: The Role of Micropores and Mesopores on Water Sorption and Fuel Cell Activity
Tatyana Soboleva et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
Fabrication of microstructure controlled cathode catalyst layers and their effect on water management in polymer electrolyte fuel cells
Sung-Dae Yim et al.
ELECTROCHIMICA ACTA (2011)
Effects of Nafion® ionomer and carbon particles on structure formation in a proton-exchange membrane fuel cell catalyst layer fabricated by the decal-transfer method
Takahiro Suzuki et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Low equivalent weight short-side-chain perfluorosulfonic acid ionomers in fuel cell cathode catalyst layers
Chao Lei et al.
JOURNAL OF POWER SOURCES (2011)
Effects of Cathode Catalyst Layer Structure and Properties Dominating Polymer Electrolyte Fuel Cell Performance
Yutaka Tabe et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
Structural Effect of Cathode Catalyst Layer on the Performance of PEFC
Hidetoshi Matsuda et al.
JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY (2011)
On the Micro-, Meso- and Macroporous Structures of Polymer Electrolyte Membrane Fuel Cell Catalyst Layers
Tatyana Soboleva et al.
ACS APPLIED MATERIALS & INTERFACES (2010)
The (electro)catalyst|membrane interface in the Proton Exchange Membrane Fuel Cell: Similarities and differences with non-electrochemical Catalytic Membrane Reactors
Marian Chatenet et al.
CATALYSIS TODAY (2010)
Performance analysis of a PEM fuel cell cathode with multiple catalyst layers
M. Srinivasarao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Significant improvement in cathode performance for proton exchange membrane fuel cell by a novel double catalyst layer design
Hua-Neng Su et al.
JOURNAL OF POWER SOURCES (2010)
Influence of binder properties on kinetic and transport processes in polymer electrolyte fuel cell electrodes
Satheesh Sambandam et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2010)
Highly porous PEM fuel cell cathodes based on low density carbon aerogels as Pt-support: Experimental study of the mass-transport losses
Julien Marie et al.
JOURNAL OF POWER SOURCES (2009)
Nanostructured Carbons as Platinum Catalyst Supports for Proton Exchange Membrane Fuel Cell Electrodes
Nathalie Job et al.
TOPICS IN CATALYSIS (2009)
Effect of Nafion® gradient in dual catalyst layer on proton exchange membrane fuel cell performance
K. -H. Kim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)
Inkjet printing of carbon supported platinum 3-D catalyst layers for use in fuel cells
Andre D. Taylor et al.
JOURNAL OF POWER SOURCES (2007)
Performance of proton-exchange membrane fuel cells using the catalyst-gradient electrode technique
M. Prasanna et al.
JOURNAL OF POWER SOURCES (2007)
Addition of NH4HCO3 as pore-former in membrane electrode assembly for PEMFC
Jishi Zhao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Interpretation of low-frequency inductive loops in PEM fuel cells
Sunil K. Roy et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Platinum supported on resorcinol-formaldehyde based carbon aerogels for PEMFC electrodes: Influence of the carbon support on electrocatalytic properties
Julien Marie et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2007)
Homogenization of the current density in polymer electrolyte fuel cells by in-plane cathode catalyst gradients
M. Santis et al.
ELECTROCHIMICA ACTA (2006)
Water management in cathode catalyst layers of PEM fuel cells - A structure-based model
M Eikerling
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Improving the performance of a PEMFC with Ketjenblack EC-600JD carbon black as the material of the microporous layer
JR Yu et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)
Functionally graded cathode catalyst layers for polymer electrolyte fuel cells - II. Experimental study of the effect of Nafion distribution
Z Xie et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Effect of relative humidity on oxygen reduction kinetics in a PEMFC
KC Neyerlin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
A multi-layer structured cathode for the PEMFC
YG Yoon et al.
JOURNAL OF POWER SOURCES (2003)
In-plane gradients in fuel cell structure and conditions for higher performance
DP Wilkinson et al.
JOURNAL OF POWER SOURCES (2003)
Share Paper
