4.7 Article

Dielectric behavior of natural ester based mineral oil blend dispersed with TiO2 and ZnO nanoparticles as insulating fluid for transformers

Journal

JOURNAL OF MOLECULAR LIQUIDS
Volume 339, Issue -, Pages -

Publisher

ELSEVIER
DOI: 10.1016/j.molliq.2021.116825

Keywords

Transformer insulation; Ester oil; Nanofluids; Dielectric properties; Weibull distribution; Breakdown voltage

Ask authors/readers for more resources

This paper focuses on studying the dielectric behavior of a mixture of natural ester oil and mineral oil blend dispersed with TiO2 and ZnO nanoparticles. The results show an overall enhancement in the dielectric properties of nanofluids, with improved breakdown voltage compared to pure mineral oil, pure ester oil, and the oil-blend. These nanofluids can be used as insulating oils in transformers, offering better cooling performance as well.
Mineral oil being the most extensively used oil in transformers still has some associated drawbacks like non-biodegradability and low fire point. Bio-degradable, non-toxic and fire-resistant vegetable-based ester oils are considered as second-generation insulating fluids. These oils are continuously being tested in order to replace the conventional mineral oil for insulation purposes. The dielectric properties of these vegetable oils are further improved by adding various types of nanomaterials. This paper focuses on preparing a mixture of natural ester oil and mineral oil blend as a base fluid and studying the dielectric behavior of this fluid after being dispersed with TiO2 and ZnO nanoparticles. Results indicated that dispersion of both nanomaterials resulted in an overall enhancement in the dielectric properties of nanofluids. The breakdown voltage of TiO2 dispersed nanofluid is reported to be about 30% greater than pure mineral oil, 24% greater than pure ester oil, and 17% greater than the oil-blend. Likewise, the breakdown voltage of ZnO dispersed nanofluid is observed to be around 28% greater than pure mineral oil, 19% greater than pure ester oil, and 16% greater than the oil-blend. Moreover, in terms of cooling, TiO2 dispersed oil-blend shows better performance as a coolant. Thus, both types of nanofluids can be used as insulating oils in the transformer depending upon the requirements expected to be met by the transformers. (C) 2021 Elsevier B.V. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available