Related references
Note: Only part of the references are listed.Densification of non-radioactive porous siliceous particles loaded with cesium potassium copper hexacyanoferrate by spark plasma sintering
Nicolas Massoni et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Mechanochemical synthesis and spark plasma sintering of hafnium carbonitride ceramics
V. S. Buinevich et al.
ADVANCED POWDER TECHNOLOGY (2021)
Preceramic paper-derived Ti3Al(Si)C2-based composites obtained by spark plasma sintering
D. G. Krotkevich et al.
CERAMICS INTERNATIONAL (2021)
Microstructure and mechanical properties of Al2O3 - WC - Co composites obtained by spark plasma sintering
Heytor V. S. B. Azevedo et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)
Fabrication of (TiB/Ti)-TiAl composites with a controlled laminated architecture and enhanced mechanical properties
Hao Ding et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Study of the densification and grain growth mechanisms occurring during spark plasma sintering of different submicronic yttria-stabilized zirconia powders
Andreas Flaureau et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Consolidation behaviour of Cu/AlN composites by pulse electric current sintering of copper-coated aluminium nitride precursors
D. Ramirez-Vinasco et al.
POWDER TECHNOLOGY (2021)
Comparison of Conventional and Flash Spark Plasma Sintering of Cu-Cr Pseudo-Alloys: Kinetics, Structure, Properties
Kirill V. Kuskov et al.
METALS (2021)
Aluminum titanate based composite porous ceramics with both high porosity and mechanical strength prepared by a special two-step sintering method
Yirong Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Characterization of reactive spark plasma sintered (Zr,Ti)B2-ZrC-SiC composites
Abbas Sabahi Namini et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)
A Novel Approach by Spark Plasma Sintering to the Improvement of Mechanical Properties of Titanium Carbonitride-Reinforced Alumina Ceramics
Magdalena Szutkowska et al.
MOLECULES (2021)
Laser re-melting influence on isothermal oxidation behavior of electric current assisted sintered CoCrFeNi, CoCrFeNiAl0.5 and CoCrFeNiTi0.5Al0.5 high entropy alloys
Kadir Mert Doleker et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Effect of Nano Copper on the Densification of Spark Plasma Sintered W-Cu Composites
Vadde Madhur et al.
NANOMATERIALS (2021)
Thermo-electro-mechanical modeling of spark plasma sintering processes accounting for grain boundary diffusion and surface diffusion
A. S. Semenov et al.
COMPUTATIONAL MECHANICS (2021)
Effect of Al on characterization and properties of AlxCoCrFeNi high entropy alloy prepared via electro-deoxidization of the metal oxides and vacuum hot pressing sintering process
Yu Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Effect of grain size on the corrosion behavior of fully recrystallized ultra-fine grained 316L stainless steel fabricated by high-energy ball milling and hot isostatic pressing sintering
Lixi Tian et al.
MATERIALS CHARACTERIZATION (2021)
Microstructure and mechanical properties of in situ TiC/Ti composites with a laminated structure synthesized by spark plasma sintering
Chengxin Lei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Evaluation of the strengthening mechanism and mechanical properties of high alloyed PM 23-NbC?TaC composite materials through vacuum sintering, sub-zero and heat treatments
Shih-Hsien Chang et al.
VACUUM (2021)
Study on the process characteristics of vacuum hot pressing sintering of TiNiNb alloy based on near net shape forming
Liu Junwei et al.
MATERIALS LETTERS (2021)
Structural changes and pseudo-piezoelectric behaviour of field assisted sintered calcium titanate
Abdullah Riaz et al.
MATERIALIA (2021)
Reactive, nonreactive, and flash spark plasma sintering of Al2O3/SiC composites-A comparative study
Karen S. Torosyan et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)
Diffusivity of Ti-Ni Diffusion Couple Enhanced by Pulse Current During Spark Plasma Sintering
Ruidi Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)
A review of multi-physical fields induced phenomena and effects in spark plasma sintering: Fundamentals and applications
Zheng-Yang Hu et al.
MATERIALS & DESIGN (2020)
Effect of Heat Treatment on Cr2Nb Phase and Properties of Spark Plasma Sintered Cu-2Cr-1Nb Alloy
Xueqian Lv et al.
MATERIALS (2020)
Fundamental principles of spark plasma sintering of metals: part II - about the existence or non-existence of the 'spark plasma effect'
Johannes Trapp et al.
POWDER METALLURGY (2020)
Mechanism of flash sintering with high electric field: In the view of electric discharge and breakdown
Jieming Liu et al.
SCRIPTA MATERIALIA (2020)
Structure property relationship in a bulk Cu-Cr-W composite synthesized by high-energy ball milling and spark plasma sintering
S. Chakraborty et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Extension of Solid Solubility and Structural Evolution in Nano-Structured Cu-Cr Solid Solution Induced by High-Energy Milling
Liyuan Shan et al.
MATERIALS (2020)
Mechanical alloying and spark plasma sintering of AlCrCuFeZn high entropy alloy
Katia Regina Cardoso et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Fundamental principles of spark plasma sintering of metals: part III - densification by plasticity and creep deformation
Johannes Trapp et al.
POWDER METALLURGY (2020)
An Experimental Apparatus for Modeling the Processes of Electric Spark Plasma Sintering
V. A. Kudryashov et al.
INSTRUMENTS AND EXPERIMENTAL TECHNIQUES (2020)
Failure analysis of arc ablated tungsten-copper electrical contacts
Y. X. Zhou et al.
VACUUM (2019)
Sliding Wear Behavior of Spark Plasma-Sintered Cu-6 Wt Pct Cr Alloy at Room and Elevated Temperatures
Shuai Pan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Fundamental principles of spark plasma sintering of metals: part I - Joule heating controlled by the evolution of powder resistivity and local current densities
Johannes Trapp et al.
POWDER METALLURGY (2019)
Synthesis of TiC reinforced Ti matrix composites by spark plasma sintering and electric discharge sintering: A comparative assessment of microstructural and mechanical properties
W. H. Lee et al.
CERAMICS INTERNATIONAL (2019)
Studies on nano-metal dispersed Cu-Cr matrix composite
S. Chakraborty et al.
MATERIALS LETTERS (2019)
Grain growth during spark plasma and flash sintering of ceramic nanoparticles: a review
Rachman Chaim et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Resistance of microcrystalline and nanocrystalline CuiCr pseudo alloys to vacuum discharge
K. V. Kuskov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructural investigation after vacuum electrical breakdown of the W-30wt.%Cu contact material
Qiuyu Chen et al.
VACUUM (2018)
High temperature thermo-physical properties of SPS-edW-Cu functional gradient materials
Magdalena Galatanu et al.
MATERIALS RESEARCH EXPRESS (2018)
Structural Investigations of Nanocrystalline Cu-Cr-Mo Alloy Prepared by High-Energy Ball Milling
Avanish Kumar et al.
JOURNAL OF ELECTRONIC MATERIALS (2017)
Effect of current on the sintering of pre-oxidized copper powders by SPS
Collet Romaric et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Numerical modeling of spark plasma sintering-Discussion on densification mechanism identification and generated porosity gradients
J. Diatta et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Theoretical and experimental investigations of local overheating at particle contacts in spark plasma sintering
Christophe Collard et al.
POWDER TECHNOLOGY (2017)
Reaction diffusion rate coefficient derivation by isothermal heat treatment in spark plasma sintering system
C. Yang et al.
SCRIPTA MATERIALIA (2017)
Microstructure and mechanical strength of near- and sub-micrometre grain size copper prepared by spark plasma sintering
K. N. Zhu et al.
MATERIALS & DESIGN (2017)
All-Materials-Inclusive Flash Spark Plasma Sintering
Charles Maniere et al.
SCIENTIFIC REPORTS (2017)
Development and Investigation of Tungsten Copper Sintered Parts for Using in Medium and High Voltage Switching Devices
M. V. Lungu et al.
INTERNATIONAL CONFERENCE ON INNOVATIVE RESEARCH - ICIR EUROINVENT 2017 (2017)
Reducing electric current and energy consumption of spark plasma sintering via punch configuration design
Liqing Huang et al.
CERAMICS INTERNATIONAL (2017)
Effect of mechanical activation on thermal and electrical conductivity of sintered Cu, Cr, and Cu/Cr composite powders
A. S. Rogachev et al.
DOKLADY PHYSICS (2016)
Influence of high-energy ball milling on electrical resistance of Cu and Cu/Cr nanocomposite materials produced by Spark Plasma Sintering
A. S. Rogachev et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Investigation on 316L/W functionally graded materials fabricated by mechanical alloying and spark plasma sintering
Chao Tan et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Preparation and Arc Erosion Characteristics of Ultrafine Crystalline CuCr50 Alloy by MA-SPS
Shi Kunyu et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2016)
Oxide reduction effects in SPS processing of Cu atomized powder containing oxide inclusions
R. Collet et al.
MATERIALS CHEMISTRY AND PHYSICS (2016)
High strength-high conductivity nanostructured copper wires prepared by spark plasma sintering and room-temperature severe plastic deformation
Claire Arnaud et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Spark Plasma Sintering of Titanium Spherical Particles
Mohammad Abedi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)
Spark plasma sintering behaviour of copper powders having different particle sizes and oxygen contents
C. Menapace et al.
POWDER TECHNOLOGY (2016)
Enhanced atomic diffusion of Fe-Al diffusion couple during spark plasma sintering
Ruidi Li et al.
SCRIPTA MATERIALIA (2016)
Tribological Performance of CuPb Alloy under Seawater Lubrication
Xianbing Ji et al.
TRIBOLOGY TRANSACTIONS (2016)
Electromigration experiments by spark plasma sintering in the silver-zinc system
Zofia Trzaska et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Mechanical alloying and properties of immiscible Cu-20 wt.% Mo alloy
A. Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Dog-bone copper specimens prepared by one-step spark plasma sintering
Claire Arnaud et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Plasma formation during electric discharge (50 V) through conductive powder compacts
Theo Saunders et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Spark plasma sintering and hydrogen pre-annealing of copper nanopowder
Judith Monnier et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Contamination during the high-energy milling of atomized copper powder and its effects on spark plasma sintering
G. Cipolloni et al.
POWDER TECHNOLOGY (2015)
Interdiffusion between copper and nickel powders and sintering map development during spark plasma sintering
S. Rudinsky et al.
SCRIPTA MATERIALIA (2015)
Microstructures and mechanical properties of spark plasma sintered Cu-Cr composites prepared by mechanical milling and alloying
Qiang Fang et al.
MATERIALS & DESIGN (2015)
Identification of densification mechanisms of pressure-assisted sintering: application to hot pressing and spark plasma sintering of alumina
G. Antou et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Microstructure and corrosion behaviour of Cu-Al-Ni shape memory alloys with Ag nanoparticles
S. N. Saud et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2015)
Temperature Distribution in Metallic Powder Particles During Initial Stage of Field-Activated Sintering
Johannes Trapp et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)
Contribution of Electric Current into Densification Kinetics During Spark Plasma Sintering of Conductive Powder
Elena V. Aleksandrova et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)
Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments
Olivier Guillon et al.
ADVANCED ENGINEERING MATERIALS (2014)
Bulk Cu-Cr nanocomposites by high-energy ball milling and spark plasma sintering
N. F. Shkodich et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
The effects of applied current on one-dimensional interdiffusion between copper and nickel in spark plasma sintering
S. Rudinsky et al.
JOURNAL OF APPLIED PHYSICS (2014)
Joining of β-SiC by spark plasma sintering
Salvatore Grasso et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Fabrication and Characterization of Nanocrystalline Al-Cu Alloy by Spark Plasma Sintering
Qingquan Kong et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Effect of SPS consolidation parameters on submicron Cu and Cu-CNT composites for thermal management
R. Sule et al.
POWDER TECHNOLOGY (2014)
The sintering mechanism in spark plasma sintering - Proof of the occurrence of spark discharge
Zhao-Hui Zhang et al.
SCRIPTA MATERIALIA (2014)
Arc characteristics and microstructure evolution of W-Cu contacts during the vacuum breakdown
Xin Wei et al.
VACUUM (2014)
Sintering of spherical particles of two immiscible phases controlled by surface and interphase boundary diffusion
L. Klinger et al.
ACTA MATERIALIA (2013)
Strengthening mechanisms in a high-strength bulk nanostructured Cu-Zn-Al alloy processed via cryomilling and spark plasma sintering
Haiming Wen et al.
ACTA MATERIALIA (2013)
Spark plasma sintering of Cu-Al-Ni shape memory alloy
Richard A. Portier et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Titanium to steel joining by spark plasma sintering (SPS) technology
Aslan Miriyev et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Effects of mechanical alloying parameters on the microstructures of nanocrystalline Cu-5 wt% Cr alloy
Shi Kunyu et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2013)
A fractographic and microstructural analysis of the neck regions of coarse copper particles consolidated by spark plasma sintering
Saliou Diouf et al.
MATERIALS LETTERS (2013)
Pressure-less spark plasma sintering effect on non-conventional necking process during the initial stage of sintering of copper and alumina
Yann Aman et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Does the Branly effect occur in spark plasma sintering?
P. Guyot et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2012)
Grain growth and sintering characteristics of Ni-Cu alloy nanopowders consolidated by the spark plasma sintering method
A. J. Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Densification mechanisms in spark plasma sintering: Effect of particle size and pressure
S. Diouf et al.
POWDER TECHNOLOGY (2012)
Twins in cryomilled and spark plasma sintered Cu-Zn-Al
Haiming Wen et al.
SCRIPTA MATERIALIA (2012)
Properties of Ni-Cu bulk alloy prepared by spark plasma sintering technique
L. X. Li
NEW MATERIALS AND PROCESSES, PTS 1-3 (2012)
The influence of oxygen and nitrogen contamination on the densification behavior of cryomilled copper powders during spark plasma sintering
Haiming Wen et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Processing and Characterization of Cu-Al-Ni Shape Memory Alloy Strips Prepared from Prealloyed Powder by Hot Densification Rolling of Powder Preforms
S. K. Vajpai et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Spark Plasma Sintering of Nanocrystalline Cu and Cu-10 Wt Pct Pb Alloy
Amit S. Sharma et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Spark plasma sintering of submicron-sized Cu-powder-Influence of processing parameters and powder oxidization on microstructure and mechanical properties
R. Ritasalo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Consolidation/synthesis of materials by electric current activated/assisted sintering
Roberto Orru et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)
Microstructure characteristic, mechanical properties and sintering mechanism of nanocrystalline copper obtained by SPS process
Z. H. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
A discussion on the absence of plasma in spark plasma sintering
Dustin M. Hulbert et al.
SCRIPTA MATERIALIA (2009)
Effects of consolidation temperature and pressure on microstructures and mechanical properties of Cu-based bulk amorphous alloys consolidated by spark plasma sintering
Chang Kyu Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
The absence of plasma in spark plasma sintering
Dustin M. Hulbert et al.
JOURNAL OF APPLIED PHYSICS (2008)
Microstructural characteristics of large-scale ultrafine-grained copper
Z. H. Zhang et al.
MATERIALS CHARACTERIZATION (2008)
Sintering mechanism of large-scale ultrafine-grained copper prepared by SPS method
Zhang Zhaohui et al.
MATERIALS LETTERS (2008)
Ultrafine-grained copper prepared by spark plasma sintering process
Zhao-Hui Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Current effects on neck growth in the sintering of copper spheres to copper plates by the pulsed electric current method
James M. Frei et al.
JOURNAL OF APPLIED PHYSICS (2007)
On the Hall-Petch relation between flow stress and grain size
Wolfgang Blum
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2006)
Neck formation and self-adjusting mechanism of neck growth of conducting powders in spark plasma sintering
XY Song et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Microstructure and mechanical properties of Cu-based bulk amorphous alloy billets fabricated by spark plasma sintering
CK Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Consolidation of CU54Ni6Zr22Ti18 bulk amorphous alloy powders
TS Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Mechanism of conductive powder microstructure evolution in the process of SPS
XY Song et al.
SCIENCE IN CHINA SERIES E-ENGINEERING & MATERIALS SCIENCE (2005)
Transition from strengthening to softening by grain boundaries in ultrafine-grained Cu
YJ Li et al.
ACTA MATERIALIA (2004)
Frequency effect on pulse electric current sintering process of pure aluminum powder
GQ Xie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Observation of particle behavior in copper powder compact during pulsed electric discharge
O Yanagisawa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Effect of plasma activated sintering (PAS) parameters on densification of copper powder
SW Wang et al.
MATERIALS RESEARCH BULLETIN (2000)
Share Paper
