Related references
Note: Only part of the references are listed.Axial and lateral buckling analysis of kevlar/epoxy fiber-reinforced composite laminates incorporating silica nanoparticles
Ozkan Ozbek
POLYMER COMPOSITES (2021)
Influence of the Epoxy Resin Process Parameters on the Mechanical Properties of Produced Bidirectional [±45°] Carbon/Epoxy Woven Composites
Claudia A. Ramirez-Herrera et al.
POLYMERS (2021)
Effects of nano reinforcing/matrix interaction on chemical, thermal and mechanical properties of epoxy nanocomposites
Sakir Yazman et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Low velocity impact and fracture characterization of SiO2 nanoparticles filled basalt fiber reinforced composite tubes
Mehmet Turan Demirci
JOURNAL OF COMPOSITE MATERIALS (2020)
Pultruded GFRP Reinforcing Bars Using Nanomodified Vinyl Ester
Shreya Vemuganti et al.
MATERIALS (2020)
Applications of silica nanoparticles in glass/carbon fiber-reinforced epoxy nanocomposite
Sidharth Reddy Karnati et al.
COMPOSITES COMMUNICATIONS (2020)
Glass fiber-reinforced epoxy composite with surface-modified graphene oxide: enhancement of interlaminar fracture toughness and thermo-mechanical performance
Alireza Ashori et al.
POLYMER BULLETIN (2019)
UV-resistant GFRP composite using carbon nanotubes
Rahulreddy Chennareddy et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of graphene oxide concentration on the flexural properties of CFRP at low temperature
Pui-yan Hung et al.
CARBON (2019)
Preparation of epoxy-acrylate copolymer/nano-silica via Pickering emulsion polymerization and its application as printing binder
Dangge Gao et al.
APPLIED SURFACE SCIENCE (2018)
A comparison study on mechanical properties of polymer composites reinforced by carbon nanotubes and graphene sheet
Yunlong Li et al.
COMPOSITES PART B-ENGINEERING (2018)
Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites
Xuming Yao et al.
COMPOSITES PART B-ENGINEERING (2018)
Fermi level equilibration of Ag and Au plasmonic metal nanoparticles supported on graphene oxide
Abhay N. Singh et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)
Effect of nano-particles on the tensile, flexural and perforation properties of the glass/epoxy composites
Ali Afrouzian et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Physico-mechanical properties of nano-polystyrene-decorated graphene oxide-epoxy composites
Prashant S. Khobragade et al.
POLYMER INTERNATIONAL (2017)
Monitoring the accumulated water soluble airborne compounds deposited on surfaces of showcases and walls in museums, archives and historical buildings
Lilian Skytte et al.
HERITAGE SCIENCE (2017)
Synergy effect of carbon nano-fillers on the fracture toughness of structural composites
C. Kostagiannakopoulou et al.
COMPOSITES PART B-ENGINEERING (2017)
Water absorption and its effect on the tensile properties of tapioca starch/polyvinyl alcohol bioplastics
H. Judawisastra et al.
INNOVATION IN POLYMER SCIENCE AND TECHNOLOGY 2016 (IPST 2016) (2017)
Mechanical characterization of Basalt/epoxy composite laminates containing graphene nanopellets
Mehmet Bulut
COMPOSITES PART B-ENGINEERING (2017)
Fracture toughness (Mode I) characterization of SiO2 nanoparticle filled basalt/epoxy filament wound composite ring with split-disk test method
Mehmet Turan Demirci et al.
COMPOSITES PART B-ENGINEERING (2017)
Reinforcement effect of graphene oxide in glass fibre/epoxy composites at in-situ elevated temperature environments: An emphasis on graphene oxide content
Rajesh Kumar Prusty et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Nanoindentation, compression and fractural characterization of highly dispersed epoxy silica nanocomposites
D. Tzetzis et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Graphene reinforced UV-curable epoxy resins: Design, manufacture and material performance
Massimiliano Barletta et al.
PROGRESS IN ORGANIC COATINGS (2016)
Improved mechanical properties of an epoxy glass-fiber composite reinforced with surface organomodified nanoclays
G. J. Withers et al.
COMPOSITES PART B-ENGINEERING (2015)
Fracture properties of nanographene reinforced EPON 862 thermoset polymer system
Abhishek Kumar et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
On the interlaminar fracture toughness of carbon fiber composites enhanced with graphene nano-species
C. Kostagiannakopoulou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
The effect of graphene oxide (GO) nanoparticles on the processing of epoxy/glass fiber composites using resin infusion
R. Umer et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Investigation of surface morphology, anti-corrosive and abrasion resistance properties of nickel oxide epoxy nanocomposite (NiO-ENC) coating on mild steel substrate
M. K. Madhup et al.
PROGRESS IN ORGANIC COATINGS (2015)
Fracture toughness and failure mechanism of graphene based epoxy composites
Swetha Chandrasekaran et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Quantitative Analysis of Curing Mechanisms of Epoxy Resin by Mid- and Near-Fourier Transform Infra Red Spectroscopy
Sagar T. Cholake et al.
DEFENCE SCIENCE JOURNAL (2014)
Epoxy/alumoxane and epoxy/boehmite nanocomposites: cure behavior, thermal stability, hardness and fracture surface morphology
Laleh Rajabi et al.
IRANIAN POLYMER JOURNAL (2014)
Processing and characterization of nanographene platelets modified phenolic resin as a precursor to carbon/carbon composites (part II)
Dhruv Bansal et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Nanoscale analysis of tensile properties and fracture of nanoreinforced epoxy polymer using micromechanics
Zhenqing Wang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Biomechanical properties of an advanced new carbon/flax/epoxy composite material for bone plate applications
Zahra S. Bagheri et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Composition, structure, and mechanical properties of hemp fiber reinforced composite with recycled high-density polyethylene matrix
Na Lu et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Effect of organosilane coupling agents on microstructure and properties of nanosilica/epoxy composites
Zhi-Qiang Yu et al.
POLYMER COMPOSITES (2012)
Preparation and photoelectrochemical performance of Ag/graphene/TiO2 composite film
Gai Li et al.
APPLIED SURFACE SCIENCE (2011)
Optimization of tool geometry parameters for turning operations based on the response surface methodology
Suleyman Neseli et al.
MEASUREMENT (2011)
Carbon Nanofibers for Strain and Impact Damage Sensing in Glass Fiber Reinforced Composites Based on an Unsaturated Polyester Resin
Marco Monti et al.
POLYMER COMPOSITES (2011)
Investigation of nanotube length effect on the reinforcement efficiency in carbon nanotube based composites
Mahmood M. Shokrieh et al.
COMPOSITE STRUCTURES (2010)
Influence of Poly(methyl methacrylate) Particles with Different Initial Temperature Rising Ramps on Size Distribution in Dispersion Polymerization
Congyun Zhang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Effect of nano-ZnO particles on the corrosion behavior of alkyd-based waterborne coatings
Shailesh K. Dhoke et al.
PROGRESS IN ORGANIC COATINGS (2009)
Self-assembled natural rubber/silica nanocomposites: Its preparation and characterization
Zheng Peng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Fracture behaviours of epoxy nanocomposites with nano-silica at low and elevated temperatures
Shiqiang Deng et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Tribological and mechanical properties of Nomex fabric composites filled with polyfluo 150 wax and nano-SiO2
Feng-Hua Su et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Nanoparticle-induced enhancement in fracture toughness of highly loaded epoxy composites over a wide temperature range
J. T. Han et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Mechanical properties of woven banana fibre reinforced epoxy composites
SM Sapuan et al.
MATERIALS & DESIGN (2006)
Cryogenic properties of SiO2/epoxy nanocomposites
CJ Huang et al.
CRYOGENICS (2005)
Fatigue resistance and structural characteristics of fiber posts: three-point bending test and SEM evaluation
S Grandini et al.
DENTAL MATERIALS (2005)
Share Paper
