Related references
Note: Only part of the references are listed.A study of reusability assessment and thermal behaviors for thermoplastic composite materials after melting process: Polypropylene/ thermoplastic polyurethane blends
Ting An Lin et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Drilling induced defects on carbon fiber-reinforced thermoplastic polyamide and their effect on mechanical properties
Dieter Meinhard et al.
COMPOSITE STRUCTURES (2021)
Adhesion Improvement of Thermoplastics-Based Composites by Atmospheric Plasma and UV Treatments
Gennaro Scarselli et al.
APPLIED COMPOSITE MATERIALS (2021)
Internal arcing and lightning strike damage in short carbon fiber reinforced thermoplastic composites
Vipin Kumar et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
2D electrical resistance (ER) mapping to Detect damage for carbon fiber reinforced polyamide composites under tensile and flexure loading
Jong-Hyun Kim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
Utilization of devulcanized waste rubber tire in development of heat insulation composite
Waseem Hittini et al.
JOURNAL OF CLEANER PRODUCTION (2021)
An evaluation of thermoplastic composite fi llers derived from construction and demolition waste based on their economic and environmental characteristics
Petri Sormunen et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Improved mechanical performances of short aramid fiber-reinforced polypropylene composites by Ti3C2 Mxene nanosheets
Bolin Tang et al.
POLYMER COMPOSITES (2021)
Effect of the Test Procedure and Thermoplastic Composite Resin Type on the Curved Beam Strength
Robin Hron et al.
MATERIALS (2021)
Mechanical properties and water absorption of kenaf/pineapple leaf fiber-reinforced polypropylene hybrid composites
Ng Lin Feng et al.
POLYMER COMPOSITES (2020)
Effect of matrix and fibre type on the impact resistance of woven composites
Jonas Claus et al.
COMPOSITES PART B-ENGINEERING (2020)
Mechanical and high velocity impact performance of a hybrid long carbon/glass fiber/polypropylene thermoplastic composite
Mohammad Shayan Asenjan et al.
IRANIAN POLYMER JOURNAL (2020)
The effect of multi-walled carbon nanotubes on the mechanical behavior of basalt fibers metal laminates: An experimental study
Hamed Aghamohammadi et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
Thermo-mechanical and mechanical behavior of hybrid isotactic polypropylene glass fiber reinforced composites (GFRC) modified with calcium carbonate (CaCO3)
Mateusz Barczewski et al.
POLYMER ENGINEERING AND SCIENCE (2020)
Structure Property Investigation of Glass-Carbon Prepreg Waste-Polymer Hybrid Composites Degradation in Water Condition
Norlin Nosbi et al.
PROCESSES (2020)
EXPERIMENTAL AND NUMERICAL STUDIES ON BALLISTIC LAMINATES ON THE POLYETHYLENE AND POLYPROPYLENE MATRIX
P. Mayer et al.
JOURNAL OF MECHANICS (2019)
Investigation of behaviors of glass/epoxy laminate composites reinforced with carbon nanotubes under quasi-static punch shear loading
Mohammad Sadeghi et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)
Influence of polyurethane dispersion as surface treatment on mechanical, thermal and dynamic mechanical properties of laminated woven carbon-fiber-reinforced polyamide 6 composites
Defang Zhao et al.
COMPOSITES PART B-ENGINEERING (2019)
High specific strength hybrid polypropylene composites using carbon fibre and hollow glass microspheres: Development, characterization and comparison with empirical models
Rupam Gogoi et al.
COMPOSITES PART B-ENGINEERING (2019)
Experimental crushing analysis of thermoplastic and hybrid composites
S. Boria et al.
COMPOSITE STRUCTURES (2019)
The Effect of Temperature and Strain Rate on the Interfacial Behavior of Glass Fiber Reinforced Polypropylene Composites: A Molecular Dynamics Study
Muhan Zhang et al.
POLYMERS (2019)
Engineering tensile behavior of hybrid carbon fiber/self-reinforced polypropylene composites by bio-inspired fiber discontinuities
Jun Tang et al.
COMPOSITES PART B-ENGINEERING (2019)
Effects of clay and silica nanoparticles on the Charpy impact resistance of a carbon/aramid fiber reinforced epoxy composite
Mohamad Alsaadi et al.
MATERIALS TESTING (2019)
Synergistic Effects of Short Glass Fiber/Short Carbon Fiber Hybrids on the Mechanical Properties of Polyethersulfone Composites
Yuan-Qing Li et al.
POLYMER COMPOSITES (2019)
Reinforcing effect of aramid fibers on fatigue behavior of SBR/aramid fiber composites
Lianpeng Yin et al.
POLYMER TESTING (2019)
Quasi and dynamic impact performance of hybrid cross-ply banana/glass fibre reinforced polypropylene composites
Norizzati Zulkafli et al.
MATERIALS RESEARCH EXPRESS (2019)
Hybridization Effects on Charpy Impact Behavior of Basalt/Aramid Fiber Reinforced Hybrid Composite Laminates
Omer Yavuz Bozkurt et al.
POLYMER COMPOSITES (2018)
Effects of surface-dissolution process multivariables on the morphology, mechanical properties, and crystallization of all-aramid composites
Jian Min Zhang et al.
POLYMER COMPOSITES (2018)
Improvement of aramid fiber III reinforced bismaleimide composite interfacial adhesion by oxygen plasma treatment
Jing Wang et al.
COMPOSITE INTERFACES (2018)
Mechanical properties of polypropylene composites reinforced by hydrolyzed and microfibrillated Kevlar fibers
Sirui Fu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Effect of Thermal Aging on Microstructures of Aramid Composites
Chang-Sheng Li et al.
POLYMER COMPOSITES (2017)
Influence of aramid fiber treatment and carbon nanotubes on the interfacial strength of polypropylene hierarchical composites
P. I. Gonzalez-Chi et al.
COMPOSITES PART B-ENGINEERING (2017)
Charpy impact behavior of clay/basalt fiber-reinforced polypropylene nanocomposites at various temperatures
Seyed Mohammad Reza Khalili et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2016)
Mechanical Properties of Long Glass Fiber-Reinforced Polyolefin Composites
Hong-Sheng Tan et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2015)
Improving Bending and Tensile Properties of Lignocellulosic Filled Polypropylene Composite Panels Using Aramid Fabric
Nadir Ayrilmis et al.
FIBERS AND POLYMERS (2014)
A simplified measurement of adhesion between p-aramid fiber and polypropylene
Zhenzong Shao et al.
JOURNAL OF THE TEXTILE INSTITUTE (2014)
Ballistic Impact Response of Ceramic-faced Aramid Laminated Composites Against 7.62 mm Armour Piercing Projectiles
N. Nayak et al.
DEFENCE SCIENCE JOURNAL (2013)
Impact Properties of Glass-fiber/Polypropylene Composites: The Influence of Fiber Loading, Specimen Geometry and Test Temperature
Normasmira A. Rahman et al.
FIBERS AND POLYMERS (2013)
Improving the flame retardancy of the polypropylene/aramid fiber composites by the introduction of decabromodiphenyl ethane and antimony trioxide
Xiao-Sui Chen et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Effect of Thermal Cycling on Hardness and Impact Properties of Polymer Composites Reinforced by Basalt and Carbon Fibers
Reza Eslami-Farsani et al.
JOURNAL OF THERMAL STRESSES (2013)
PA6 and Kevlar fiber reinforced isotactic polypropylene: Structure, mechanical properties and crystallization and melting behavior
Songfang Zhao et al.
MATERIALS & DESIGN (2012)
Ballistic performance of thermoplastic composite laminates made from aramid woven fabric and polypropylene matrix
J. G. Carrillo et al.
POLYMER TESTING (2012)
Fluorinated aramid fiber reinforced polypropylene composites and their characterization
J. Maity et al.
POLYMER COMPOSITES (2007)
Effects of fiber composition and graft-copoly(ethylene/maleic anhydride) on thermoplastic natural rubber composites reinforced by aramid fiber
Ishak Ahmad et al.
POLYMER COMPOSITES (2006)