Related references
Note: Only part of the references are listed.Sustainable milling of Ti-6Al-4V: A trade-off between energy efficiency, carbon emissions and machining characteristics under MQL and cryogenic environment
Muhammad Jamil et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Experimental evaluation of eco-friendly hybrid cooling methods in slot milling of titanium alloy
Amin Bagherzadeh et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Investigation of surface modification and tool wear on milling Nimonic 80A under hybrid lubrication
Nimel Sworna K. Ross et al.
TRIBOLOGY INTERNATIONAL (2021)
Surface Behavior of AISI H13 Alloy Steel Machining under Environmentally Friendly Cryogenic MQL with PVD-Coated Tool
G. Manimaran et al.
JOURNAL OF TESTING AND EVALUATION (2020)
Effects of eco-friendly cooling strategy on machining performance in micro-scale diamond turning of Ti-6Al-4V
Peng Huang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Multi-Response Optimization in High-Speed Machining of Ti-6Al-4V Using TOPSIS-Fuzzy Integrated Approach
Adel T. Abbas et al.
MATERIALS (2020)
Machinability investigations of hardened steel with biodegradable oil-based MQL spray system
Munish Kumar Gupta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Investigation of hard turning performance of eco-friendly cooling strategies: Cryogenic cooling and nanofluid based MQL
Cagri Vakkas Yildirim
TRIBOLOGY INTERNATIONAL (2020)
Performance analysis of coated carbide tool in turning of Nimonic 80A superalloy under different cutting environments
Mustafa Gunay et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Sustainability and machinability improvement of Nimonic-90 using indigenously developed green hybrid machining technology
Navneet Khanna et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Slot milling of titanium alloy with hexagonal boron nitride and minimum quantity lubrication and multi-objective process optimization for energy efficiency
Khaled Ali Osman et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Numerical and experimental investigation of cutting forces in turning of Nimonic 80A superalloy
Mehmet Erdi Korkmaz et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2020)
Research on surface heat transfer mechanism of liquid nitrogen jet cooling in cryogenic machining
Yongqing Wang et al.
APPLIED THERMAL ENGINEERING (2020)
Wear behaviour of TiAlN coated solid carbide end-mill under alumina enriched minimum quantity palm oil-based lubricating condition
Binayak Sen et al.
TRIBOLOGY INTERNATIONAL (2020)
Tool wear progression and its effects on energy consumption and surface roughness in cryogenic assisted turning of Ti-6Al-4V
Chetan Agrawal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication
Lalatendu Dash et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)
Performance evaluation of MQL with AL2O3 mixed nanofluids prepared at different concentrations in milling of Hastelloy C276 alloy
Fatih Gunan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Tool wear and machined surface characteristics in side milling Ti6Al4V under dry and supercritical CO2 with MQL conditions
Qinglong An et al.
TRIBOLOGY INTERNATIONAL (2020)
Multi-objective Optimization of Double-Jet MQL System Parameters Meant for Enhancing the Turning Performance of Ti-6Al-4V Alloy
Prianka B. Zaman et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)
Role of cutting fluids under minimum quantity lubrication: An experimental investigation of chip thickness
Shrikant U. Gunjal et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Machining Investigation of Nimonic-80A Superalloy Under Cryogenic CO2as Coolant Using PVD-TiAlN/TiN Coated Tool at 45° Nozzle Angle
K. Nimel Sworna Ross et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)
Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V
Mozammel Mia et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Effect of cryogenic CO2 and LN2 coolants in milling of aluminum alloy
M. Jebaraj et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Performance improvement of cryogenic turning process during machining of 17-4 PH stainless steel using multi objective optimization techniques
Potta Sivaiah et al.
MEASUREMENT (2019)
Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy
Alborz Shokrani et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy
Munish Kumar Gupta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Application of Carbon Dioxide Snow in Machining of CGI Using an Additively Manufactured Turning Tool
Thomas Heep et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)
Influence of Different Cooling Methods on Tool Life, Wear Mechanisms and Surface Roughness in the Milling of Nickel-Based Waspaloy with WC Tools
Cagri Vakkas Yildirim et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)
An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions
Mozammel Mia et al.
JOURNAL OF CLEANER PRODUCTION (2018)
An extensive review of the water consumption and cutting fluid based sustainability concerns in the metal cutting sector
Salman Pervaiz et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Experimental investigation and optimization of machining parameters for sustainable machining
Vinay Varghese et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition
Mozammel Mia et al.
MEASUREMENT (2018)
Solid Lubricant-assisted Minimum Quantity Lubrication and Cooling strategies to improve Ti6Al4V machinability in finishing turning
S. Sartori et al.
TRIBOLOGY INTERNATIONAL (2018)
Specific cutting energy modeling for turning nickel-based Nimonic 90 alloy under MQL condition
Chetan et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Multi-response optimization of end milling parameters under through-tool cryogenic cooling condition
Mozammel Mia
MEASUREMENT (2017)
Hybrid lubricating/cooling strategies to reduce the tool wear in finishing turning of difficult-to-cut alloys
S. Sartori et al.
WEAR (2017)
Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review
Anuj Kumar Sharma et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Recent developments in sustainable manufacturing of gears: a review
Kapil Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2016)
The effect of minimum quantity lubrication in the intermittent turning of magnesium based on vibration signals
D. Carou et al.
MEASUREMENT (2016)
Environment Friendly Machining of Ni-Cr-Co Based Super Alloy using Different Sustainable Techniques
Chetan et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
A note on the use of the minimum quantity lubrication (MQL) system in turning
Diego Carou et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2015)
Environmental friendly cutting fluids and cooling techniques in machining: a review
Sujan Debnath et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining
Yusuf Kaynak et al.
MACHINING SCIENCE AND TECHNOLOGY (2014)
Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
Salman Pervaiz et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
OPTIMAL MQL AND CUTTING CONDITIONS DETERMINATION FOR DESIRED SURFACE ROUGHNESS IN TURNING OF BRASS USING GENETIC ALGORITHMS
V. N. Gaitonde et al.
MACHINING SCIENCE AND TECHNOLOGY (2012)
An experimental investigation on effects of minimum quantity lubrication oil supply rate in high-speed end milling of Ti-6Al-4V
Xiao Jiang Cai et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Machining induced surface integrity in titanium and nickel alloys: A review
Durul Ulutan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
MICROSTRUCTURAL ANALYSIS AND MACHINABILITY IMPROVEMENT OF UDIMET 720 VIA CRYOGENIC MILLING
Samuel L. Truesdale et al.
MACHINING SCIENCE AND TECHNOLOGY (2009)
Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions
J. Paulo Davim et al.
MATERIALS AND MANUFACTURING PROCESSES (2007)
Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions
J. P. Davim et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel
NR Dhar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Share Paper
