Related references
Note: Only part of the references are listed.Microstructure and enhanced mechanical properties of hybrid-sized B4C particle-reinforced 6061Al matrix composites
Minqiang Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties
Hong-Yu Yang et al.
COMPOSITES PART B-ENGINEERING (2021)
Microstructural, mechanical, and wear properties characterization and strengthening mechanisms of Al7075/SiCnp composites processed through ultrasonic cavitation assisted stir-casting
Thella Babu Rao
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Indentation size effect, geometrically necessary dislocations and pile-up effects in hardness testing of irradiated nickel
M. A. Mattucci et al.
ACTA MATERIALIA (2021)
Synthesis and characterization of an in-situ Al2O3/Al-Cu composite with a heterogeneous structure
Tong Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Design of an in-situ multi-scale particles reinforced (Al2O3+ZrB2+AlN)/Al composite with high strength, elasticity modulus and thermal stability
Yihan Bian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Evaluation of the effect of adding carbon nanotubes on the effective mechanical properties of ceramic particulate aluminum matrix composites
Changjiang Nie et al.
MECHANICS OF MATERIALS (2020)
An analysis of the influence of the precipitate type on the mechanical behavior of Al - Cu alloys by means of micropillar compression tests
B. Bellon et al.
ACTA MATERIALIA (2020)
Effect of amount of TiB2 and B4C particles on tribological behavior of Al7075/B4C/TiB2 mono and hybrid surface composites produced by friction stir processing
Farshid Karpasand et al.
SURFACE & COATINGS TECHNOLOGY (2020)
High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane
Xin Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Achieving high combination of strength and ductility of Al matrix composite via in-situ formed Ti-Al3Ti core-shell particle
Baisong Guo et al.
MATERIALS CHARACTERIZATION (2020)
Optimization of wear behaviour of Al7075 hybrid metal matrix composites using Taguchi approach
S. Arunkumar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Spark plasma sintered Al-based composites reinforced with BN nanosheets exfoliated under ball milling in ethylene glycol
Khabib U. Yusupov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective
Abolfazl Azarniya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Synthesis of a (ZrAl3+AlN)/Al composite and the influence of particles content and element Cu on the microstructure and mechanical properties
Tong Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Preparation of in-situ NdB6 nanoparticles and their reinforcement effect on Al-Cu-Mn alloy
Jinhua Ding et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano-Sized Particles
Run Geng et al.
ADVANCED ENGINEERING MATERIALS (2018)
Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes
Baisong Guo et al.
CARBON (2018)
Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition
Rahul Gupta et al.
COMPOSITES PART B-ENGINEERING (2018)
Dislocation density based model for Al-Cu-Mg alloy during quenching with considering the quench-induced precipitates
Ruichao Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Hall-Petch relations and strengthening of Al-ZnO composites in view of grain size relative to interparticle spacing
C. L. Li et al.
SCRIPTA MATERIALIA (2018)
Effects of nano-SiCp content on microstructure and mechanical properties of SiCp/A356 composites assisted with ultrasonic treatment
Kun Hu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Superplasticity behavior and deformation mechanism of the in-situ Al3Zr/6063Al composites processed by friction stir processing
Yonggang Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
A comprehensive analysis of mechanical characteristics of carbon nanotube-metal matrix nanocomposites
M. K. Hassanzadeh-Aghdam et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of TiC particles on the mechanical properties of aluminium alloy metal matrix composites (MMCs)
Utkarsh Pandey et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Effects of ultrasonic vibration on the microstructure and tensile properties of the nano ZrB2/2024Al composites synthesized by direct melt reaction
Xizhou Kai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Availability of in-situ reinforced active-transient liquid phase bond with good Wettability for 70 vol.% SiCp/A356 composite using Al-Mg-Ga-Ti interlayer
Guifeng Zhang et al.
MATERIALS & DESIGN (2016)
Local microstructure evolution in Al 6061-T6 friction stir weld nugget enhanced by ultrasonic vibration
G. K. Padhy et al.
MATERIALS & DESIGN (2016)
Characterization of hybrid aluminum matrix composites for advanced applications - A review
Jaswinder Singh et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Study on microscopic ductile fracture of in-situ TiB2/2024 Al matrix composite
Su Jie et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
An exploratory investigation on the in-situ synthesis of SiC/AlN/Al composites by spark plasma sintering
W. Daoush et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
A Unified Model for the Prediction of Yield Strength in Particulate-Reinforced Metal Matrix Nanocomposites
F. A. Mirza et al.
MATERIALS (2015)
Design and fabrication of functionally graded in-situ aluminium composites for automotive pistons
A. G. Arsha et al.
MATERIALS & DESIGN (2015)
Hardness and wear characteristics of Hybrid Aluminium Metal Matrix Composites produced by stir casting technique
B. N. Sarada et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Nanoindentation studies of ex situ AlN/Al metal matrix nanocomposites
Sandeep Fale et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Structural and mechanical properties of Ni60Nb40 amorphous alloy particle reinforced Al-based composites produced by microwave-assisted rapid sintering
S. Jayalakshmi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Evaluation of mechanical and wear properties of hybrid aluminium matrix composites
T. Rajmohan et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Reactive mechanism and mechanical properties of in situ composites fabricated from an Al-TiO2 system by friction stir processing
Q. Zhang et al.
ACTA MATERIALIA (2012)
Orowan strengthening at low temperatures in bcc materials studied by dislocation dynamics simulations
G. Monnet et al.
ACTA MATERIALIA (2011)
An enhanced FEM model for particle size dependent flow strengthening and interface damage in particle reinforced metal matrix composites
J. C. Shao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing
I. S. Lee et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Orowan strengthening and forest hardening superposition examined by dislocation dynamics simulations
Sylvain Queyreau et al.
ACTA MATERIALIA (2010)
Properties of submicron AlN particulate reinforced aluminum matrix composite
Jianhua Wang et al.
MATERIALS & DESIGN (2009)
Properties and deformation behaviourOf Mg-Y2O3 nanocomposites
C. S. Goh et al.
ACTA MATERIALIA (2007)
Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model
MX Zhang et al.
ACTA MATERIALIA (2005)
Edge-to-edge matching and its applications - Part II. Application to Mg-Al, Mg-Y and Mg-Mn alloys
MX Zhang et al.
ACTA MATERIALIA (2005)
Processing of TiNiSMA fiber reinforced AZ31 Mg alloy matrix composite by pulsed current hot pressing
K Mizuuchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
TEM study of continuous precipitation in Mg-9 Wt%Al-l Wt%Zn alloy
S Celotto
ACTA MATERIALIA (2000)
Share Paper
