The role of AlN thickness in MOCVD growth of N-polar GaN

The influence of the thickness of aluminum nitride (AlN) on the surface morphology, crystalline quality, and polarity of N-polar gallium nitride (GaN) grown by metal organic chemical vapor deposition (MOCVD) is investigated in this study. With a medium temperature (1000 celcius) AlN buffer layer of 150 nm, a hexagonaldefect-free N-polar GaN thin film with low dislocation densities (4.2 x 108 cm-2 for screw dislocation density and 3.7 x 109 cm-2 for edge dislocation density) is obtained on a 2-in. vicinal sapphire substrate (c off m plane 2 degrees). With the reduction of the AlN thickness to 80 nm, the N-polar GaN surface becomes rough and the crystalline quality is exacerbated. While the thickness of AlN is increased to 200 nm, the polarity of GaN is changed to Ga-polar. The transmission electron microscopy (TEM) results reveal an undulated interface between GaN and AlN with a large density of pyramidal defects which may contribute to the polarity inversion of GaN. The controllable polarity inversion through changing the thickness of AlN provides a promising method for the polarity engineering of nitride-based devices. (c) 2021 Elsevier B.V. All rights reserved.

Automated summary

This study investigates the influence of aluminum nitride (AlN) thickness on the N-polar gallium nitride (GaN) grown by metal organic chemical vapor deposition (MOCVD). Controllable polarity inversion through changing the thickness of AlN provides a promising method for polarity engineering of nitride-based devices. The thickness of AlN plays a critical role in determining the surface morphology, crystalline quality, and polarity of the grown N-polar GaN thin film.