Related references
Note: Only part of the references are listed.Mechanical properties of rolled and aged AA6061 sheets at room-temperature and cryogenic environments
Yue Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Ultrafine grained Cu-3Ag-xZr (x=0.5, 1.0 wt%) alloys with high strength and good ductility fabricated through rapid solidification and cryorolling
Xiang Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Study on microstructure and mechanical properties of 3003 alloys with scandium and copper addition
Liang Long et al.
VACUUM (2020)
Influence of cryogenic deformation on second-phase particles, grain structure, and mechanical properties of Al-Cu-Mn alloy
Fei Dong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
A crystal plasticity investigation of slip system interaction, GND density and stored energy in non-proportional fatigue in Nickel-based superalloy
Xu Lu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Microstructural evolution and strengthening mechanisms operating during cryogenic rolling of solutionized Al-Cu-Mg alloy
Ivan S. Zuiko et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Deformation behavior of Al-Cu-Mn alloy sheets under biaxial stress at cryogenic temperatures
Wangjun Cheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
A comparative study of the transformation kinetics of recrystallization texture of CC and DC 3003 aluminum alloys
W. X. Wang et al.
MATERIALS CHARACTERIZATION (2018)
Effects of cold predeformation on dissolution of second-phase Al2Cu particles during solution treatment of 2219 Al-Cu alloy forgings
Hailin He et al.
MATERIALS CHARACTERIZATION (2018)
Mechanical properties and microstructure of a Ti-6A1-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling
Hailiang Yu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A study on microstructure and mechanical properties of AA 3003 aluminum alloy joints by underwater friction stir welding
Y. B. Tan et al.
MATERIALS CHARACTERIZATION (2017)
Investigation of tensile behaviour of cryorolled and room temperature rolled 6082 Al alloy
Vineet Kumar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Cryogenic rolling-enhanced mechanical properties and microstructural evolution of 5052 Al-Mg alloy
Jintao Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Cryorolling effect on microstructure and mechanical properties of Fe-25Cr-20Ni austenitic stainless steel
Yi Xiong et al.
MATERIALS & DESIGN (2015)
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
Kaka Ma et al.
ACTA MATERIALIA (2014)
Formation of nanostructures in commercial-purity titanium via cryorolling
S. V. Zherebtsov et al.
ACTA MATERIALIA (2013)
Precipitation of partially coherent α-Al(Mn,Fe)Si dispersoids and their strengthening effect in AA 3003 alloy
Y. J. Li et al.
ACTA MATERIALIA (2012)
The achievement of high strength in an Al 6061 alloy by the application of cryogenic and warm rolling
U. G. Kang et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Simultaneously enhancing the ductility and strength of cryorolled Zr via tailoring dislocation configurations
Defeng Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effects of Strain Rate and Deformation Temperature on Microstructures and Hardness in Plastically Deformed Pure Aluminum
F. Huang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2011)
Comparison of texture evolution between different thickness layers in cold rolled Al-Mg alloy
M. B. Chen et al.
MATERIALS CHARACTERIZATION (2011)
Microstructure dependence of a Cu-38Zn alloy on processing conditions of constrained groove pressing
Kaiping Peng et al.
ACTA MATERIALIA (2009)
Effect of the Zener-Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation
Y. S. Li et al.
ACTA MATERIALIA (2009)
Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed
Naoya Kamikawa et al.
ACTA MATERIALIA (2009)
Useful properties of twist extrusion
Y. Beygelzimer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Effect of initial grain sizes on hardness variation and strain distribution of pure aluminum severely deformed by compression tests
Tadanobu Inoue et al.
ACTA MATERIALIA (2008)
Deformation and annealing textures of equal-channel angular pressed 1050 Al alloy strips
Jae Yeol Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Continuous static recrystallization in ultrafine-grained copper processed by multi-directional forging
A. Takayama et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Effect of recovery on the recrystallization texture of an Al-Mg alloy
W. C. Liu et al.
SCRIPTA MATERIALIA (2007)
The effects of texture on formability of aluminum alloy sheets
Kengo Yoshida et al.
ACTA MATERIALIA (2007)
Effect of precipitation on rolling texture evolution in continuous cast AA 3105 aluminum alloy
W. C. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Experimental study of phase transformations in 3003 aluminium alloys during heating by in situ high energy X-ray synchrotron radiation
A Dehmas et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Lattice rotation and stability of 22.5° ND rotated cube orientation in cold rolled polycrystalline AA 5182 aluminum alloy
WC Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Texture evolution of continuous cast and direct chill cast AA 3003 aluminum alloys during cold rolling
WC Liu et al.
SCRIPTA MATERIALIA (2004)
Quantitative analysis of texture evolution in cold-rolled, continuous-cast AA 5xxx-series aluminum alloys
WC Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Comparison of recrystallization and recrystallization textures in cold-rolled DC and CC AA 5182 aluminum alloys
WC Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization
YJ Li et al.
ACTA MATERIALIA (2003)
Effect of micro segregation and dislocations on the nucleation kinetics of precipitation in aluminium alloy AA3003
SP Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Kinetics of the formation of the β fiber rolling texture in continuous cast AA 5xxx series aluminum alloys
WC Liu et al.
SCRIPTA MATERIALIA (2002)
High tensile ductility in a nanostructured metal
YM Wang et al.
NATURE (2002)
Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening
JY Huang et al.
ACTA MATERIALIA (2001)
The mechanism of nanocrystalline structure formation in Ni3Al during severe plastic deformation
AV Korznikov et al.
ACTA MATERIALIA (2001)