Related references
Note: Only part of the references are listed.Friction stir spot welding of 5052 aluminum alloy to carbon fiber reinforced polyether ether ketone composites
Honggang Dong et al.
MATERIALS & DESIGN (2021)
An overview of Aluminium Matrix Composites: Particulate reinforcements, manufacturing, modelling and machining
Samadhan Deshmukh et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Effect of graphite on aluminium matrix composites fabricated by stir casting route - A review
K. S. Lakshmi Narayana et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Finite element simulation of residual stress in direct metal laser sintering of AlSi10Mg built part: Effect of laser spot overlapping
Ghulam Rasul Nazami et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Structural modelling and mechanical behaviors of graphene/carbon nanotubes reinforced metal matrix composites via atomic-scale simulations: A review
Caihao Qiu et al.
COMPOSITES PART C: OPEN ACCESS (2021)
Structural, mechanical and tribological properties of Cu-ZrO2/GNPs hybrid nanocomposites
A. M. Sadoun et al.
CERAMICS INTERNATIONAL (2020)
Statistics of ceramic strength: Use ordinary Weibull distribution function or Weibull statistical fracture theory?
Wei-Sheng Lei et al.
CERAMICS INTERNATIONAL (2020)
A review on fabrication methods, reinforcements and mechanical properties of aluminum matrix composites
Vineet Chak et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effects of ZrO2 nanoparticle content on microstructure and wear behavior of titanium matrix composite
M. S. Abd-Elwahed et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Selective laser melting of TiN nanoparticle-reinforced AlSi10Mg composite: Microstructural, interfacial, and mechanical properties
C. Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
High-throughput experimentation for microstructural design in additively manufactured 316L stainless steel
Ankur Kumar Agrawal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure evolution, mechanical properties, and strengthening mechanism of TiC reinforced Inconel 625 nanocomposites fabricated by selective laser melting
Lan Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Experimental study on properties of Al-Al2O3 nanocomposite hybridized by graphene nanosheets
A. M. Sadoun et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effect of SiC particle size on densification behavior and mechanical properties of SiCp/AlSi10Mg composites fabricated by laser powder bed fusion
Gang Xue et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Experimental and numerical investigation on strengthening mechanisms of nanostructured Al-SiC composites
A. Melaibari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting
Y. K. Xiao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Experimental study on tribological properties of Cu-Al2O3 nanocomposite hybridized by graphene nanoplatelets
A. M. Sadoun et al.
CERAMICS INTERNATIONAL (2019)
Influence of processing parameters on selective laser melted SiCp/AlSi10Mg composites: Densification, microstructure and mechanical properties
Gang Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Improved mechanical properties of AlSi7Mg/nano-SiCp composites fabricated by selective laser melting
Min Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
Bandar AlMangour et al.
COMPOSITES PART B-ENGINEERING (2019)
Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
Le Zhou et al.
MATERIALS CHARACTERIZATION (2018)
Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process
I Rosenthal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting
Kun V. Yang et al.
MATERIALS & DESIGN (2018)
Identification of a suitable volumetric heat source for modelling of selective laser melting of Ti6Al4V powder using numerical and experimental validation approach
Ashish Kumar Mishra et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Investigation of three-dimensional morphology changes of the eutectic Si particles affected by trace P and Sr in Al-7%Si cast alloys by means of synchrotron nano-tomography
S. Furuta et al.
MATERIALS CHARACTERIZATION (2017)
Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting
Takahiro Kimura et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure evolution and superior tensile properties of low content graphene nanoplatelets reinforced pure Ti matrix composites
X. N. Mu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Microstructure and mechanical properties of functionally graded TiCp/Ti6A14V composite fabricated by laser melting deposition
Liqun Li et al.
CERAMICS INTERNATIONAL (2017)
Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility
X. P. Li et al.
ACTA MATERIALIA (2017)
Effectively enhanced load transfer by interfacial reactions in multi-walled carbon nanotube reinforced Al matrix composites
Weiwei Zhou et al.
ACTA MATERIALIA (2017)
Characteristics and mechanical properties of magnesium matrix composites reinforced with micron/submicron/nano SiC particles
M. J. Shen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Selective laser melting of carbon/AlSi10Mg composites: Microstructure, mechanical and electronical properties
Xiao Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Structural, bonding, anisotropic mechanical and thermal properties of Al4SiC4 and Al4Si2C5 by first-principles investigations
Liang Sun et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2016)
Selective laser melting of in-situ Al4SiC4+SiC hybrid reinforced Al matrix composites: Influence of starting SiC particle size
Fei Chang et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites
Pengpeng Yuan et al.
MATERIALS & DESIGN (2015)
Crack and wear behavior of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process
Subrata Kumar Ghosh et al.
MATERIALS & DESIGN (2011)
Optical investigation of stacking faults in 4H-SiC epitaxial layers: Comparison of 3C and 8H polytypes
S. Juillaguet et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2009)
Multi-functional SiC/Al Composites for Aerospace Applications
Cui Yan et al.
Chinese Journal of Aeronautics (2008)
Handbook of SiC properties for fuel performance modeling
Lance L. Snead et al.
JOURNAL OF NUCLEAR MATERIALS (2007)
Influence of porosity on fatigue resistance of cast SiC particulate-reinforced Al-Si alloy composite
CS Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)