Related references
Note: Only part of the references are listed.A multi-deformation mechanisms assisted metastable β-ZrTiAlV alloy exhibits high yield strength and high work hardening rate
Zhongni Liao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Strain induced martensite stabilization in β Ti-Zr-Nb shape memory alloy
Xiaoyun Song et al.
MATERIALS LETTERS (2020)
Effect of varying a phase fraction on the mechanical properties and deformation mechanisms in a metastable β-ZrTiAlV alloy
Zhongni Liao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
High strength and ductility in low-cost Ti-Al-Fe-Mn alloy exhibiting transformation-induced plasticity
Jeong Mok Oh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Influence of Fe addition in CP titanium on phase transformation, microstructure and mechanical properties during high pressure torsion
Guanyu Deng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effects of Mo concentration on recrystallization texture, deformation mechanism and mechanical properties of Ti-Mo binary alloys
Yong-Deok Im et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Strain rate and mechanical stability in determining deformation behavior of beta Ti alloys
S. Sadeghpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Deformation mechanism of metastable titanium alloy showing stress-induced α′-Martensitic transformation
Sang Won Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Temperature-dependent elastic modulus model for metallic bulk materials
Weiguo Li et al.
MECHANICS OF MATERIALS (2019)
Twinning-induced plasticity (TWIP) steels
Bruno C. De Cooman et al.
ACTA MATERIALIA (2018)
omega phase acts as a switch between dislocation channeling and joint twinning- and transformation-induced plasticity in a metastable beta titanium alloy
M. J. Lai et al.
ACTA MATERIALIA (2018)
A novel way to enhance the strength of twinning induced plasticity (TWIP) steels
Rajib Kalsar et al.
SCRIPTA MATERIALIA (2018)
Evidence for deformation-induced phase transformation in a high Sn content zirconium alloy
C. Cochrane et al.
ACTA MATERIALIA (2018)
High Ductility in a fully martensitic microstructure: a paradox in a Ti alloy produced by selective laser melting
A. Zafari et al.
MATERIALS RESEARCH LETTERS (2018)
Effects of Nb and Zr on structural stabilities of Ti-Mo-Sn-based alloys with low modulus
Beibei Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Strain-rate effect on work -hardening behavior in β-type Ti-10Mo-1Fe alloy with TWIP effect
Xin Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Metastable Zr-Nb alloys for spinal fixation rods with tunable Young's modulus and low magnetic resonance susceptibility
X. L. Zhao et al.
ACTA BIOMATERIALIA (2017)
Strong deformation anisotropies of ω-precipitates and strengthening mechanisms in Ti-10V-2Fe-3A1 alloy micropillars: Precipitates shearing vs precipitates disordering
Wei Chen et al.
ACTA MATERIALIA (2016)
The dynamic response of a metastable β Ti-Nb alloy to high strain rates at room and elevated temperatures
Hongyi Zhan et al.
ACTA MATERIALIA (2016)
Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy
Mansur Ahmed et al.
ACTA MATERIALIA (2016)
Role of grain size in tensile behavior in twinning-induced plasticity β Ti-20V-2Nb-2Zr alloy
W. L. Wang et al.
MATERIALS CHARACTERIZATION (2016)
Deformation mechanism of ω-enriched Ti-Nb-based gum metal: Dislocation channeling and deformation induced ω-β transformation
M. J. Lai et al.
ACTA MATERIALIA (2015)
The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy
Mansur Ahmed et al.
ACTA MATERIALIA (2015)
Phase Stability and Stress-Induced Transformations in Beta Titanium Alloys
R. Prakash Kolli et al.
JOM (2015)
Deformation-induced martensitic transformation in a new metastable β titanium alloy
S. Sadeghpour et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
The influence of Zr content on microstructure and precipitation of suicide in as-cast near α titanium alloys
Binguo Fu et al.
MATERIALS CHARACTERIZATION (2015)
Dependence of stress-induced omega transition and mechanical twinning on phase stability in metastable β Ti-V alloys
X. L. Wang et al.
MATERIALS CHARACTERIZATION (2015)
On the deformation mechanisms and strain rate sensitivity of a metastable β Ti-Nb alloy
Hongyi Zhan et al.
SCRIPTA MATERIALIA (2015)
A new titanium alloy with a combination of high strength, high strain hardening and improved ductility
F. Sun et al.
SCRIPTA MATERIALIA (2015)
Heating-induced martensitic transformation and time-dependent shape memory behavior of Ti-Nb-O alloy
Masaki Tahara et al.
ACTA MATERIALIA (2014)
The dynamic response of a β titanium alloy to high strain rates and elevated temperatures
Hongyi Zhan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Influence of strain rate on stress induced martensitic transformation in β solution treated TB8 alloy
Tang Bo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Effect of microalloying elements (Nb, V and Ti) on the hot flow behavior of high-Mn austenitic twinning induced plasticity (TWIP) steel
F. Reyes-Calderon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of strain rate on stress-induced martensitic formation and the compressive properties of Ti-V-(Cr,Fe)-Al alloys
C. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Characterization and numerical modeling of high strain rate mechanical behavior of Ti-15-3 alloy for machining simulations
M. Hokka et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of grain size on tensile properties of fine-grained metastable β titanium alloys fabricated by stress-induced martensite and its reverse transformations
Ming-Hui Cai et al.
SCRIPTA MATERIALIA (2012)
On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects
Matthieu Marteleur et al.
SCRIPTA MATERIALIA (2012)
Microstructures and mechanical properties of metastable Ti-30Zr-(Cr, Mo) alloys with changeable Young's modulus for spinal fixation applications
Xiaoli Zhao et al.
ACTA BIOMATERIALIA (2011)
Mechanical behaviors of Ti-V-(Al, Sn) alloys with α′ martensite microstructure
Hiroaki Matsumoto et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Relationship between various deformation-induced products and mechanical properties in metastable Ti-30Zr-Mo alloys for biomedical applications
Xiaoli Zhao et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2011)
Self-adjustment of Young's modulus in biomedical titanium alloys during orthopaedic operation
Masaaki Nakai et al.
MATERIALS LETTERS (2011)
Development of high Zr-containing Ti-based alloys with low Young's modulus for use in removable implants
Xiaoli Zhao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
Shape memory properties of Ti-Nb-Mo biomedical alloys
Y. Al-Zain et al.
ACTA MATERIALIA (2010)
The effect of strain rate on trigger stress for stress-induced martensitic transformation and yield strength in Ti-18Al-8Nb alloy
Archana Paradkar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effect of nitrogen addition and annealing temperature on superelastic properties of Ti-Nb-Zr-Ta alloys
Masaki Tahara et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effects of strain rate and temperature on mechanical behaviour of Ti-15Mo-5Zr-3Al alloy
Woei-Shyan Lee et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2008)
Various stages in stress-strain curve of Ti-Al-Nb alloys undergoing SIMT
Archana G. Paradkar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
α′ Martensite Ti-V-Sn alloys with low Young's modulus and high strength
Hiroaki Matsumoto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Martensitic transformation, shape memory effect and superelasticity of Ti-Nb binary alloys
H. Y. Kim et al.
ACTA MATERIALIA (2006)
Super-elastic titanium alloy with unstable plastic deformation
YL Hao et al.
APPLIED PHYSICS LETTERS (2005)
Effect of strain rate on the strain-induced γ→α′-martensite transformation and mechanical properties of austenitic stainless steels
J Talonen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Share Paper
