4.6 Article

Lab-on-printed circuit board based water harvesting condensation particle counter for ubiquitous monitoring of airborne ultrafine particles

Journal

JOURNAL OF AEROSOL SCIENCE
Volume 160, Issue -, Pages -

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.jaerosci.2021.105911

Keywords

Water harvesting condensation particle counter; Lab-on-printed circuit board technology; Moderated water condensation method; Airborne ultrafine particles; Ubiquitous monitoring

Funding

  1. Basic Science Research Program through the National Research Foundation of Korea (NRF) - Ministry of Education [NRF-2020M3H5A1081108]
  2. Korea Environment Industry & Technology Institute (KEITI) through Technology Development Project for Biological Hazards Management in Indoor Air Project - Korea Ministry of Environment (MOE) [2021003370005]

Ask authors/readers for more resources

We have developed a water harvesting condensation particle counter (WHCPC) using lab-on-printed circuit board (PCB) technology. Our method provides an inexpensive, compact, and highly accurate system for the ubiquitous monitoring of airborne ultrafine particles (UFPs). The proposed system is able to monitor harmless UFPs using water as the working fluid, without the need for water replenishment using a moderated water condensation method.
We have developed a water harvesting condensation particle counter (WHCPC) using lab-onprinted circuit board (PCB) technology. Our method provides an inexpensive, compact, and highly accurate system for the ubiquitous monitoring of airborne ultrafine particles (UFPs). Labon-PCB-based WHCPC uses water as the working fluid to monitor harmless UFPs; it does not require water replenishment using a moderated water condensation method. Lab-on-PCB-based WHCPC consists of two main parts, a UFP growth section and a mini-OPC, through which UFPs are grown into micro-sized droplets and the grown droplets are single-counted. The UFP growth section consists of two PCBs and a 3D-printed channel. The heater, temperature sensor, and hydrophilic micropillar array wick, which are essential for the growth of UFPs, are integrated on the PCBs. Simulations were performed to verify the saturated-air generation and water collection in the UFP growth section. The dew points of the inlet and outlet air samples were measured to verify water collection using the moderated water condensation method. Through quantitative experiments using UFPs artificially generated in the laboratory, particles of 9.4 nm could be counted. It was possible to precisely measure the number concentration (2500-270000 N cm(-3)) over a wide range. In addition, the stability of the proposed system was confirmed through a long-term comparison with the reference CPC in an outdoor environment. The proposed system realized the sensorization of CPC because it could monitor harmless UFPs, with minimal maintenance; the proposed system is also inexpensive and compact.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available