4.3 Article

Enhancing the performance of natural rubber latex with polymeric isocyanate as cold-pressing and formaldehyde free adhesive for plywood

Related references

Note: Only part of the references are listed.
Article Materials Science, Paper & Wood

Influence of different hot-pressing conditions on the performance of eco-friendly jabon plywood bonded with citric acid adhesive

Jajang Sutiawan et al.

Summary: The study developed a citric acid-based adhesive for manufacturing plywood, aiming to address the health issue associated with formaldehyde-based adhesives. Results showed that plywood with specific pressing temperature and time exhibited improved properties and met certain standards.

WOOD MATERIAL SCIENCE & ENGINEERING (2022)

Article Polymer Science

Ambient curable natural rubber latex adhesive cross-linked with polymeric isocyanate for bonding wood

Muhammad Adly Rahandi Lubis et al.

Summary: This study investigated a formaldehyde-free ambient curable adhesive based on natural rubber latex, using poly(vinyl alcohol) and polymeric 4,4-methylene diphenyl diisocyanate as additives. The results indicate that the adhesive with 15% pMDI showed the highest shear strength, making it suitable for manufacturing laminated wood.

POLYMER BULLETIN (2022)

Article Remote Sensing

Aerodynamics Effect of Holes in UAV Wings Modified for VTOL Capability

Laith S. Sawaqed et al.

Summary: This research explores the possibility of modifying the X8 Skywalker from a fixed-wing unmanned aerial vehicle into a convertiplane. Computational fluid dynamics and wind tunnel experiments were conducted to analyze the performance of different wing configurations. The results indicate that the proposed modifications can generate enough lift despite reducing the wing area, with the filleted hole configuration demonstrating less drag and turbulence effects at low angles of attack.

DRONE SYSTEMS AND APPLICATIONS (2022)

Article Polymer Science

The reduction of adhesive application in plywood manufacturing by using nanocellulose-reinforced urea-formaldehyde resin

Jakub Kawalerczyk et al.

Summary: The study found that adding nanocellulose in plywood production can significantly improve bonding quality and mechanical properties, while also reducing resin spread rate. Although the introduction of nanocellulose did not reduce free formaldehyde content, it led to a slight decrease in emitted formaldehyde by allowing a reduction in adhesive application.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Engineering, Chemical

In-situ modification of low molar ratio urea-formaldehyde resins with cellulose nanofibrils for plywood

Eko Setio Wibowo et al.

Summary: The study demonstrated that in-situ modified UF resins with CNFs showed superior performance compared to neat UF resins, with shorter gelation time, faster curing rates, higher TSS, and lower FE values. UF resins modified with CNFs synthesized using Synth 2 exhibited better performance than Synth 1.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2021)

Article Polymer Science

Tough thermosetting polyurethanes and adhesives from rubber seed oil by hydroformylation

Jian Hong et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Article Engineering, Environmental

Life cycle assessment of a hot-pressing machine to manufacture particleboards: hotspots, environmental indicators, and solutions

Diogo Aparecido Lopes Silva et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2020)

Proceedings Paper Forestry

Synthesis of polymeric isocyanate microcapsules via interfacial polymerization and their characterisation using spectroscopy and microscopy techniques

M. A. R. Lubis et al.

INTERNATIONAL CONFERENCE ON FOREST PRODUCTS (ICFP) 2020: 12TH INTERNATIONAL SYMPOSIUM OF IWORS (2020)

Article Engineering, Environmental

Life Cycle Assessment of Urea-Formaldehyde Adhesive and Phenol-Formaldehyde Adhesives

Minliang Yang et al.

ENVIRONMENTAL PROCESSES-AN INTERNATIONAL JOURNAL (2020)

Review Construction & Building Technology

Formaldehyde sources, formaldehyde concentrations and air exchange rates in European housings

Tunga Salthammer

BUILDING AND ENVIRONMENT (2019)

Article Materials Science, Biomaterials

Biocompatibility and biodegradability of filler encapsulated chloroacetated natural rubber/polyvinyl alcohol nanofiber for wound dressing

Mohammad Hossein Azarian et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Article Public, Environmental & Occupational Health

Latex glove use among healthcare workers in Australia

Renee N. Carey et al.

AMERICAN JOURNAL OF INFECTION CONTROL (2018)

Article Construction & Building Technology

Evaluation of natural rubber latex as film forming additive in cementitious mortar

My Linh Vo et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Green & Sustainable Science & Technology

Development of high-performance self-compacting concrete using waste recycled concrete aggregates and rubber granules

Farhad Aslani et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Green & Sustainable Science & Technology

Formaldehyde-free particleboards using natural latex as the polymeric binder

Erika Yukari Nakanishi et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Chemistry, Multidisciplinary

Biogenic Formaldehyde: Content and Heat Generation in the Wood of Three Tree Species

Mohammad Tasooji et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Review Forestry

Hot Pressing of Wood-Based Composites: A Review

Peixing Wei et al.

FOREST PRODUCTS JOURNAL (2016)

Article Chemistry, Multidisciplinary

Simple Milligram-Scale Extraction of Formaldehyde from Wood

Mohammad Tasooji et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Article Polymer Science

Grafting of poly(vinyl alcohol) on natural rubber latex particles

W. Wongthep et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Article Engineering, Environmental

Natural Rubber-Based Pressure-Sensitive Adhesives: A Review

Imran Khan et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2011)

Article Thermodynamics

Thermal degradation of both latex and latex cast films forming membranes - Combined TG/FTIR investigation

D. L. S. Agostini et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2008)

Article Engineering, Chemical

Epoxidized natural rubber-bonded para rubber wood particleboard

B. Thongnuanchan et al.

POLYMER ENGINEERING AND SCIENCE (2007)

Review Polymer Science

Hydrogen bonds in polymer blends

Y He et al.

PROGRESS IN POLYMER SCIENCE (2004)