4.7 Review

Generative adversarial network in mechanical fault diagnosis under small sample: A systematic review on applications and future perspectives

Related references

Note: Only part of the references are listed.
Article Computer Science, Artificial Intelligence

A new method for intelligent fault diagnosis of machines based on unsupervised domain adaptation

Nannan Lu et al.

Summary: The paper discusses the challenges of data driven fault diagnosis and proposes a deep domain adaptation architecture to address the issues related to labeled data and distribution discrepancy. Through adapting both conditional and marginal distributions with an adaptively weighted strategy, the proposed model demonstrates superiority over other intelligent fault diagnosis methods.

NEUROCOMPUTING (2021)

Article Engineering, Multidisciplinary

Rolling bearing fault diagnosis using variational autoencoding generative adversarial networks with deep regret analysis

Shaowei Liu et al.

Summary: A novel data augmentation method, named variational autoencoding generative adversarial networks with deep regret analysis, is proposed to improve the fault diagnosis ability of rolling bearings. The method integrates an encoder, discriminator, and feature matching module to enhance data generation quality and reduce over-fitting. The results show that the proposed method is more effective and robust compared to typical data synthesis based fault diagnosis methods.

MEASUREMENT (2021)

Article Engineering, Mechanical

Fusing convolutional generative adversarial encoders for 3D printer fault detection with only normal condition signals

Chuan Li et al.

Summary: This paper introduces a novel fault detection method fCGAE, which creates models using only normal data. The method optimizes encoder models using convolutional neural networks and generative adversarial networks, and merges them with support vector machines. Experimental results demonstrate that fCGAE shows excellent performance in fault detection in 3D printers.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Computer Science, Artificial Intelligence

An interpretable data augmentation scheme for machine fault diagnosis based on a sparsity-constrained generative adversarial network

Liang Ma et al.

Summary: A novel sparsity-constrained GAN (SCGAN) method is developed for vibration signal generation, utilizing a two-stage training process to enhance machine fault diagnosis with data augmentation.

EXPERT SYSTEMS WITH APPLICATIONS (2021)

Article Computer Science, Artificial Intelligence

The theoretical research of generative adversarial networks: an overview

Yanchun Li et al.

Summary: This paper focuses on the theoretical achievements of Generative Adversarial Networks (GAN) and categorizes the improved methods into GAN variants and hybrid GANs. It discusses theoretical results, training dynamics, improved methods, and the advantages of GAN over other deep generative models. It also addresses future research directions and open issues to be further explored by the community.

NEUROCOMPUTING (2021)

Article Automation & Control Systems

A Small Sample Focused Intelligent Fault Diagnosis Scheme of Machines via Multimodules Learning With Gradient Penalized Generative Adversarial Networks

Tianci Zhang et al.

Summary: This study proposes an intelligent fault diagnosis method based on generative adversarial networks, where the generator generates mechanical signals to expand the training dataset and the classifier has the ability to extract fault features and classify with high accuracy under small sample conditions.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Article Energy & Fuels

A novel semi-supervised data-driven method for chiller fault diagnosis with unlabeled data

Bingxu Li et al.

Summary: A novel semi-supervised data-driven fault diagnosis method for chiller systems based on semi-generative adversarial networks is proposed to improve diagnostic performance using unlabeled data and reduce dependency on labeled data. Experimental results show that the proposed method significantly enhances diagnostic accuracy, even with limited labeled samples and vast unlabeled samples.

APPLIED ENERGY (2021)

Article Automation & Control Systems

A Novel Weighted Adversarial Transfer Network for Partial Domain Fault Diagnosis of Machinery

Weihua Li et al.

Summary: A novel weighted adversarial transfer network (WATN) is proposed for partial domain fault diagnosis, which reduces the distribution discrepancy of shared classes between domains and identifies and filters out irrelevant source examples by introducing adversarial training and a weighting learning strategy. Experiments show that WATN achieves satisfactory performance and outperforms state-of-the-art methods on two diagnosis data sets.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

Article Engineering, Multidisciplinary

Improved generative adversarial network for vibration-based fault diagnosis with imbalanced data

Bingxi Zhao et al.

Summary: This study proposes an improved Generative Adversarial Network (GAN) to enhance fault diagnosis performance with imbalanced data, introducing an auxiliary classifier, an Auto-Encoder based method, and an online sample filter to ensure accuracy and variety of selected samples. Experimental results demonstrate the advantage of this method in imbalanced fault diagnosis.

MEASUREMENT (2021)

Article Computer Science, Interdisciplinary Applications

A double-layer attention based adversarial network for partial transfer learning in machinery fault diagnosis

Yafei Deng et al.

Summary: Recently, deep transfer learning approaches have been widely developed for mechanical fault diagnosis issue. DA-GAN model shows great superiority in dealing with mechanical partial transfer problem in both TIM and TDM.

COMPUTERS IN INDUSTRY (2021)

Article Automation & Control Systems

Intelligent Fault Diagnosis by Fusing Domain Adversarial Training and Maximum Mean Discrepancy via Ensemble Learning

Yibin Li et al.

Summary: The article proposes an intelligent fault diagnosis method based on an improved domain adaptation method, utilizing training feature extractors and ensemble learning for industrial equipment health monitoring, effectively addressing domain mismatch issues.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

Article Engineering, Industrial

Deep multi-scale adversarial network with attention: A novel domain adaptation method for intelligent fault diagnosis*

Bo Zhao et al.

Summary: Data-driven intelligent fault diagnosis methods are widely used in the health management and maintenance decision-making of rotating machinery. However, domain shift phenomena and label information preparation can affect performance. To address these challenges, a novel MSANA framework with multi-scale modules and attention mechanisms is introduced to improve transferability and stability.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

Article Automation & Control Systems

Deep Feature Generating Network: A New Method for Intelligent Fault Detection of Mechanical Systems Under Class Imbalance

Tongyang Pan et al.

Summary: This article introduces a two-stage method for zero-shot fault detection of rolling bearings, including a feature generation network and an improved deep neural network classifier, trained with synthetic pseudofault features to recognize unseen fault samples. Experimental results demonstrate the practicality of the method for industrial applications.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

Article Automation & Control Systems

A New Multiple Source Domain Adaptation Fault Diagnosis Method Between Different Rotating Machines

Jun Zhu et al.

Summary: The fault diagnosis based on data-driven methods is widely researched when supervised samples of the target machine are available, but labeled samples in practical machines are usually scarce. A new transfer learning approach based on multisource domain adaptation is proposed to address this issue, enabling learning from multiple domains for more general diagnosis knowledge that benefits prediction for the target domain.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

Article Engineering, Multidisciplinary

A novel deep multi-source domain adaptation framework for bearing fault diagnosis based on feature-level and task-specific distribution alignment

Behnoush Rezaeianjouybari et al.

Summary: The paper proposes a novel multi-source domain adaptation deep learning framework for fault diagnosis of rotary machinery, aligning domains in both feature-level and task-level to address the domain shift problem.

MEASUREMENT (2021)

Article Computer Science, Artificial Intelligence

Meta-learning for few-shot bearing fault diagnosis under complex working conditions

Chuanjiang Li et al.

Summary: This study introduces a novel fault diagnosis method based on model-agnostic meta-learning, which acquires prior knowledge through optimizing initialization parameters and achieves fast and accurate bearing fault diagnosis under unknown working conditions.

NEUROCOMPUTING (2021)

Article Engineering, Electrical & Electronic

Fault Diagnosis for Electro-Mechanical Actuators Based on STL-HSTA-GRU and SM

Xiaoyu Zhang et al.

Summary: In this study, a novel algorithm combining HSTA-GRU and STL is proposed to predict multiple time-series data for enhanced fault diagnosis of EMAs. By extracting seasonal factors and capturing spatio-temporal relationships among multivariate EMA sensors, the algorithm improves time series prediction and fault classification efficiency.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Article Engineering, Electrical & Electronic

A Novel Multitask Adversarial Network via Redundant Lifting for Multicomponent Intelligent Fault Detection Under Sharp Speed Variation

Zhen Shi et al.

Summary: The study introduces a novel multitask redundant lifting adversarial network (MRLAN) which addresses the issue of multicomponent fault diagnosis in mechanical systems through a reconstruction network and multitask category discriminator.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Article Computer Science, Information Systems

An Imbalanced Fault Diagnosis Method for Rolling Bearing Based on Semi-Supervised Conditional Generative Adversarial Network With Spectral Normalization

Minqiu Xu et al.

Summary: The study proposes a method using a Semi-supervised Conditional Generative Adversarial Network to address data imbalance in rolling bearings. By generating new samples with similar distribution, the dataset is effectively balanced, and satisfactory results are achieved in bearing fault diagnosis.

IEEE ACCESS (2021)

Article Computer Science, Artificial Intelligence

Deep learning fault diagnosis method based on global optimization GAN for unbalanced data

Funa Zhou et al.

KNOWLEDGE-BASED SYSTEMS (2020)

Article Engineering, Electrical & Electronic

A Generic Anomaly Detection of Catenary Support Components Based on Generative Adversarial Networks

Yang Lyu et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

Review Engineering, Mechanical

Applications of machine learning to machine fault diagnosis: A review and roadmap

Yaguo Lei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Computer Science, Artificial Intelligence

Imbalanced sample fault diagnosis of rotating machinery using conditional variational auto-encoder generative adversarial network

You-ren Wang et al.

APPLIED SOFT COMPUTING (2020)

Article Engineering, Electrical & Electronic

Intelligent Fault Diagnosis via Semisupervised Generative Adversarial Nets and Wavelet Transform

Pengfei Liang et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

Article Computer Science, Artificial Intelligence

Single and simultaneous fault diagnosis of gearbox via a semi-supervised and high-accuracy adversarial learning framework

Pengfei Liang et al.

KNOWLEDGE-BASED SYSTEMS (2020)

Article Automation & Control Systems

Machinery Health Monitoring Based on Unsupervised Feature Learning via Generative Adversarial Networks

Jun Dai et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)

Article Computer Science, Artificial Intelligence

Double-level adversarial domain adaptation network for intelligent fault diagnosis

Jinyang Jiao et al.

KNOWLEDGE-BASED SYSTEMS (2020)

Article Computer Science, Artificial Intelligence

Partial transfer learning in machinery cross-domain fault diagnostics using class-weighted adversarial networks

Xiang Li et al.

NEURAL NETWORKS (2020)

Review Computer Science, Artificial Intelligence

A systematic review of deep transfer learning for machinery fault diagnosis

Chuan Li et al.

NEUROCOMPUTING (2020)

Article Automation & Control Systems

Fault-Attention Generative Probabilistic Adversarial Autoencoder for Machine Anomaly Detection

Jingyao Wu et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)

Review Computer Science, Artificial Intelligence

A comprehensive review on convolutional neural network in machine fault diagnosis

Jinyang Jiao et al.

NEUROCOMPUTING (2020)

Article Engineering, Electrical & Electronic

Domain Adversarial Transfer Network for Cross-Domain Fault Diagnosis of Rotary Machinery

Zhuyun Chen et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

Article Engineering, Mechanical

Residual joint adaptation adversarial network for intelligent transfer fault diagnosis

Jinyang Jiao et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Computer Science, Information Systems

An Intelligent Fault Diagnosis for Rolling Bearing Based on Adversarial Semi-Supervised Method

Yongchao Zhang et al.

IEEE ACCESS (2020)

Article Computer Science, Information Systems

CovidGAN: Data Augmentation Using Auxiliary Classifier GAN for Improved Covid-19 Detection

Abdul Waheed et al.

IEEE ACCESS (2020)

Article Computer Science, Information Systems

Data Fusion Generative Adversarial Network for Multi-Class Imbalanced Fault Diagnosis of Rotating Machinery

Qianjun Liu et al.

IEEE ACCESS (2020)

Article Computer Science, Artificial Intelligence

On the Effectiveness of Least Squares Generative Adversarial Networks

Xudong Mao et al.

IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE (2019)

Article Automation & Control Systems

Deep Convolutional Transfer Learning Network: A New Method for Intelligent Fault Diagnosis of Machines With Unlabeled Data

Liang Guo et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Article Automation & Control Systems

A Novel Deep Learning Network via Multiscale Inner Product With Locally Connected Feature Extraction for Intelligent Fault Detection

Tongyang Pan et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)

Article Computer Science, Artificial Intelligence

Exploiting the generative adversarial framework for one-class multi-dimensional fault detection

Spyridon Plakias et al.

NEUROCOMPUTING (2019)

Article Imaging Science & Photographic Technology

An Overview of Deep Learning Based Methods for Unsupervised and Semi-Supervised Anomaly Detection in Videos

B. Ravi Kiran et al.

JOURNAL OF IMAGING (2018)