Related references
Note: Only part of the references are listed.A nonlocal method for modeling interfaces: Numerical simulation of decohesion and sliding at grain boundaries
Shahed Rezaei et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Coupled chemo-mechanical modeling of fracture in polycrystalline cathode for lithium-ion battery
Avtar Singh et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
A chemo-mechanical grain boundary model and its application to understand the damage of Li-ion battery materials
Yang Bai et al.
SCRIPTA MATERIALIA (2020)
Bending good beats breaking bad: phase separation patterns in individual cathode particles upon lithiation and delithiation
David A. Santos et al.
MATERIALS HORIZONS (2020)
A review on modeling of electro-chemo-mechanics in lithium-ion batteries
Ying Zhao et al.
JOURNAL OF POWER SOURCES (2019)
Atomistically motivated interface model to account for coupled plasticity and damage at grain boundaries
Shahed Rezaei et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Simulation of crack behavior of secondary particles in Li-ion battery electrodes during lithiation/de-lithiation cycles
Yuwei Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Two-level modeling of lithium-ion batteries
Yang Bai et al.
JOURNAL OF POWER SOURCES (2019)
A Wide Range of Testing Results on an Excellent Lithium-Ion Cell Chemistry to be used as Benchmarks for New Battery Technologies
Jessie E. Harlow et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Disintegration of Meatball Electrodes for LiNi x Mn y Co z O2 Cathode Materials
R. Xu et al.
EXPERIMENTAL MECHANICS (2018)
High-Performance and Industrially Feasible Ni-Rich Layered Cathode Materials by Integrating Coherent Interphase
Kyoungmin Min et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Isogeometric boundary element method for calculating effective property of steady state thermal conduction in 2D heterogeneities with a homogeneous interphase
X. Y. Qu et al.
JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS (2018)
A thermo-chemo--mechanically coupled constitutive model for curing of glassy polymers
Trisha Sain et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Corrosive fracture of electrodes in Li-ion batteries
Rong Xu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Evaluation of nearly singular integrals in isogeometric boundary element method
Y. P. Gong et al.
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2017)
A cohesive zone framework for environmentally assisted fatigue
Susana del Busto et al.
ENGINEERING FRACTURE MECHANICS (2017)
Prediction of fracture and damage in micro/nano coating systems using cohesive zone elements
Shahed Rezaei et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Modeling of phase separation across interconnected electrode particles in lithium-ion batteries
Ying Zhao et al.
RSC ADVANCES (2017)
Lithiation across interconnected V2O5 nanoparticle networks
Luis R. De Jesus et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Modeling of internal mechanical failure of all-solidstate batteries during electrochemical cycling, and implications for battery design
Giovanna Bucci et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Impact of Microcrack Generation and Surface Degradation on a Nickel-Rich Layered Li[Ni0.9Co0.05Mn0.05]O2 Cathode for Lithium-Ion Batteries
Ho-Hyun Sun et al.
CHEMISTRY OF MATERIALS (2017)
Enhancing Interfacial Bonding between Anisotropically Oriented Grains Using a Glue-Nanofiller for Advanced Li-Ion Battery Cathode
Hyejung Kim et al.
ADVANCED MATERIALS (2016)
Persistent State-of-Charge Heterogeneity in Relaxed, Partially Charged Li1-xNi1/3Co1/3Mn1/3O2 Secondary Particles
William E. Gent et al.
ADVANCED MATERIALS (2016)
Mechanical-Electrochemical Modeling of Agglomerate Particles in Lithium-Ion Battery Electrodes
Bin Wu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Compositionally Graded Cathode Material with Long-Term Cycling Stability for Electric Vehicles Application
Un-Hyuck Kim et al.
Advanced Energy Materials (2016)
On the fragmentation of active material secondary particles in lithium ion battery cathodes induced by charge cycling
Guanhua Sun et al.
EXTREME MECHANICS LETTERS (2016)
An iterative FE-BE method and rectangular cell model for effective elastic properties of doubly periodic anisotropic inclusion composites
Z. Y. Liu et al.
COMPOSITE STRUCTURES (2015)
Effective elastic properties and stress states of doubly periodic array of inclusions with complex shapes by isogeometric boundary element method
Y. Bai et al.
COMPOSITE STRUCTURES (2015)
Isogeometric analysis of mechanically coupled Cahn-Hilliard phase segregation in hyperelastic electrodes of Li-ion batteries
Ying Zhao et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
A New Coating Method for Alleviating Surface Degradation of LiNi0.6Co0.2Mn0.2O2 Cathode Material: Nanoscale Surface Treatment of Primary Particles
Hyejung Kim et al.
NANO LETTERS (2015)
Future generations of cathode materials: an automotive industry perspective
Dave Andre et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Structural Changes and Thermal Stability of Charged LiNixMnyCozO2 Cathode Materials Studied by Combined In Situ Time-Resolved XRD and Mass Spectroscopy
Seong-Min Bak et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
A fully coupled diffusional-mechanical formulation: numerical implementation, analytical validation, and effects of plasticity on equilibrium
A. Villani et al.
ARCHIVE OF APPLIED MECHANICS (2014)
3D Isogeometric Analysis of intercalation-induced stresses in Li-ion battery electrode particles
P. Stein et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)
A Cahn-Hilliard-type phase-field theory for species diffusion coupled with large elastic deformations: Application to phase-separating Li-ion electrode materials
Claudio V. Di Leo et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Observation of Microstructural Evolution in Li Battery Cathode Oxide Particles by In Situ Electron Microscopy
Dean J. Miller et al.
ADVANCED ENERGY MATERIALS (2013)
Finite size effects on the structural progression induced by lithiation of V2O5: a combined diffraction and Raman spectroscopy study
Gregory A. Horrocks et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Computational implementation of the PPR potential-based cohesive model in ABAQUS: Educational perspective
Kyoungsoo Park et al.
ENGINEERING FRACTURE MECHANICS (2012)
A Cahn-Hilliard-type theory for species diffusion coupled with large elastic-plastic deformations
Lallit Anand
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
R. Quey et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)
Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities
Christophe Geuzaine et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2009)
A unified potential-based cohesive model of mixed-mode fracture
Kyoungsoo Park et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2009)
MOOSE: A parallel computational framework for coupled systems of nonlinear equations
Derek Gaston et al.
NUCLEAR ENGINEERING AND DESIGN (2009)
TEM study of fracturing in spherical and plate-like LiFePO4 particles
H. Gabrisch et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)
Materials challenges facing electrical energy storage
M. Stanley Whittingham
MRS BULLETIN (2008)
Stress generation and fracture in lithium insertion materials
J Christensen et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2006)
libMesh: a C++ library for parallel adaptive mesh refinement/coarsening simulations
Benjamin S. Kirk et al.
ENGINEERING WITH COMPUTERS (2006)
Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
TJR Hughes et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2005)
Lithium batteries and cathode materials
MS Whittingham
CHEMICAL REVIEWS (2004)
Simulation of cup-cone fracture using the cohesive model
I Scheider et al.
ENGINEERING FRACTURE MECHANICS (2003)
Colossal reversible volume changes in lithium alloys
LY Beaulieu et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2001)
Share Paper
