Related references
Note: Only part of the references are listed.Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing
Grzegorz Ludwik Golewski et al.
MATERIALS (2021)
The Beneficial Effect of the Addition of Fly Ash on Reduction of the Size of Microcracks in the ITZ of Concrete Composites under Dynamic Loading
Grzegorz Ludwik Golewski
ENERGIES (2021)
An extended analytical model for predicting the compressive failure behaviors of composite laminate with an arbitrary elliptical delamination
Kangkang Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
An asymptotic method-based composite plate model considering imperfect interfaces
Jaehun Lee et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Fracture assessment of cracked composite materials: Progress in models and criteria
Mahdi Fakoor et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Changes in the Fracture Toughness under Mode II Loading of Low Calcium Fly Ash (LCFA) Concrete Depending on Ages
Grzegorz Ludwik Golewski
MATERIALS (2020)
Mixed mode I/II fracture criterion for arbitrary cracks in orthotropic materials considering T-stress effects
Hannaneh Manafi Farid et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Probabilistic micromechanical damage model for mixed mode I/II fracture investigation of composite materials
Nabi Mehri Khansari et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
A non-local stress fracture criterion accounting for the anisotropy of the fracture toughness
Marek Romanowicz
ENGINEERING FRACTURE MECHANICS (2019)
Mixed mode I
J. P. Reis et al.
MATERIALS TODAY COMMUNICATIONS (2019)
Mixed-mode I/II fracture criterion for crack initiation assessment of composite materials
Mahdi Fakoor et al.
ACTA MECHANICA (2019)
A new macro-mechanical approach for investigation of damage zone effects on mixed mode I/II fracture of orthotropic materials
Mahdi Fakoor et al.
ACTA MECHANICA (2018)
An assessment of microcracks in the Interfacial Transition Zone of durable concrete composites with fly ash additives
Grzegorz Ludwik Golewski
COMPOSITE STRUCTURES (2018)
Coupled stress and energy criterion for multiple matrix cracking in cross-ply composite laminates
M. Kashtalyan et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
A New Approach for Investigation of Mode II Fracture Toughness in Orthotropic Materials
Mahdi Fakoor et al.
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2018)
General mixed mode I/II failure criterion for composite materials based on matrix fracture properties
Mandi Fakoor et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
A micromechanical model for prediction of mixed mode I/II delamination of laminated composites considering fiber bridging effects
Z. Daneshjoo et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Effect of T-stress on the initial fracture toughness of concrete under I/II mixed-mode loading
Yanhua Zhao et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
A New Approach for Investigation of Mode II Fracture Toughness in Orthotropic Materials
Mahdi Fakoor et al.
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2018)
Mode II fracture characterization of wood using the Four-Point End-Notched Flexure (4ENF) test
M. F. S. F. de Moura et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
A new mixed mode I/II failure criterion for laminated composites considering fracture process zone
Z. Daneshjoo et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Augmented Strain Energy Release Rate (ASER): A novel approach for investigation of mixed-mode I/II fracture of composite materials
M. Fakoor
ENGINEERING FRACTURE MECHANICS (2017)
Crack propagation in non-homogenous materials: Evaluation of mixed-mode SIFs, T-stress and kinking angle using a variant of EFG Method
N. Muthu et al.
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2016)
Mixed mode I/II fracture criterion for orthotropic materials based on damage zone properties
M. Fakoor et al.
ENGINEERING FRACTURE MECHANICS (2016)
A new energy based mixed-mode cohesive zone model
M. F. S. F. de Moura et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
T-stress effects in mixed mode I/II/III brittle fracture
Majid R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2015)
A review of T-stress and its effects in fracture mechanics
M. Gupta et al.
ENGINEERING FRACTURE MECHANICS (2015)
Application of Cohesive Zone Modeling to Composite Bonded Repairs
M. F. S. F. de Moura
JOURNAL OF ADHESION (2015)
Fracture investigation of wood under mixed mode I/II loading based on the maximum shear stress criterion
M. Fakoor et al.
STRENGTH OF MATERIALS (2013)
T-stress evaluations for nonhomogeneous materials using an interaction integral method
Hongjun Yu et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2012)
A numerical study on the SEN-TPB test applied to mode I wood fracture characterization
N. Dourado et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
A new mixed-mode fracture criterion for orthotropic materials, based on strength properties
A. R. Gowhari Anaraki et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2011)
Stress and Failure Analysis of Repaired Sandwich Composite Beams using a Cohesive Damage Model
D. A. Ramantani et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2010)
General mixed mode I/II fracture criterion for wood considering T-stress effects
A. R. Gowhari Anaraki et al.
MATERIALS & DESIGN (2010)
Mixed mode fracture criterion for wood based on a reinforcement microcrack damage model
A. R. Gowhari Anaraki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Equivalent crack based analyses of ENF and ELS tests
M. F. S. F. de Moura et al.
ENGINEERING FRACTURE MECHANICS (2008)
Verification of a non-local stress criterion for mixed mode fracture in wood
Marek Romanowicz et al.
ENGINEERING FRACTURE MECHANICS (2008)
Computation of stress intensity factors (KI, KII) and T-stress for cracks reinforced by composite patching
M. R. Ayatollahi et al.
COMPOSITE STRUCTURES (2007)
A new fracture mechanics theory for orthotropic materials like wood
T. A. C. M. van der Put
ENGINEERING FRACTURE MECHANICS (2007)
Modulus of elasticity of Norway spruce saw logs vs. structural lumber grade
Jacob Edlund et al.
HOLZ ALS ROH-UND WERKSTOFF (2006)
Effect of T-stress on damage zone size predictions of notched laminated composites
HY Yeh et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
Numerical analysis of the ENF test for mode II wood fracture
M. A. L. Silva et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Maximum circumferential stress criterion applied to orthotropic materials
C Carloni et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2005)
A brief note on elastic T-stress for centred crack in anisotropic plate
RKL Su et al.
INTERNATIONAL JOURNAL OF FRACTURE (2005)
On the inclined crack problem in an orthotropic medium under biaxial loading
L Nobile et al.
ENGINEERING FRACTURE MECHANICS (2004)
Numerical solutions of two-dimensional anisotropic crack problems
RKL Su et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Non-singular term effect for the inclined crack extension in anisotropic solids under uniaxial loading
WK Lim
JOURNAL OF COMPOSITE MATERIALS (2002)
The effect of the T-stress on crack path selection in adhesively bonded joints
B Chen et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2001)
Isotropic damage model with different tensile-compressive response for brittle materials
A Brencich et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)
Fracture of wood under mixed mode loading I. Derivation of fracture criteria
LO Jernkvist
ENGINEERING FRACTURE MECHANICS (2001)
Fracture of wood under mixed mode loading II.: Experimental investigation of Picea abies
LO Jernkvist
ENGINEERING FRACTURE MECHANICS (2001)
The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading
DJ Smith et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2001)
Kinked crack in anisotropic bodies
S Yang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)