4.7 Article

Numerical study of deformation behavior of rolled AZ31B plate under cyclic loading in different material orientations based on the EVPSC-TDT model

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Molecular dynamics simulation on the cyclic deformation of magnesium single crystals

Zheyuan Xing et al.

Summary: Molecular dynamics simulations were used to study the cyclic deformation of magnesium single crystalline nano-pillars, revealing that the crystalline orientation and loading path can influence the tension-compression asymmetry. Different deformation modes were observed under different loading directions and angles, providing new insights into the mechanical property of Mg crystals under cyclic loading.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Article Nanoscience & Nanotechnology

Onset of detwinning in Mg-3Al-1Zn alloy: A synchrotron-based X-ray diffraction study

N. B. Zhang et al.

Summary: This study investigates the onset of detwinning in magnesium alloy Mg-3Al-1Zn under continuous loading using real-time in situ synchrotron X-ray diffraction. The results reveal that detwinning of the {10 (1) over bar2} extension twins occurs immediately upon unloading, regardless of whether the twins are activated by tension parallel to or compression perpendicular to the c-axis fibers.

SCRIPTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Stress relaxations during cyclic loading-unloading in precipitation hardened Mg-4.5Zn

Jun Wang et al.

Summary: The study investigates the impact of aging on cyclic loading-unloading responses of extruded Mg-Zn alloys, revealing that aging has complex effects on twinning and slip behavior. Aged samples promote twinning over slip during loading and experience additional 'forward' twinning upon unloading. Furthermore, aging leads to noticeable ratchetting strain compared to non-aged samples.

ACTA MATERIALIA (2021)

Article Engineering, Mechanical

The effects of heat treatment on the response of WE43 Mg alloy: crystal plasticity finite element simulation and SEM-DIC experiment

Sriram Ganesan et al.

Summary: This study investigates the effects of heat treatment on the mechanical response of a WE43 Mg alloy using an integrated framework of SEM-DIC experiment and CPFE simulation, focusing on local displacement and strain. By evaluating the CPFE framework with results from SEM-DIC experiment, the effects of heat treatment were analyzed using CRSS and relative slip activity. The study also addresses the contributions of different strengthening mechanisms on CRSS in WE43 Mg alloy.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Nanoscience & Nanotechnology

In situ monitoring of dislocation, twinning, and detwinning modes in an extruded magnesium alloy under cyclic loading conditions

Di Xie et al.

Summary: This study examines the microscopic deformation mechanisms of an extruded, precipitation-strengthened AZ80 magnesium alloy under strain-controlled low-cycle fatigue using in situ neutron diffraction measurements. The results show that plastic deformation is primarily controlled by alternating {10.2} extension twinning and detwinning mechanisms. The complex evolution of dominant deformation mechanisms in this alloy is influenced by initial texture, precipitation strengthening, and load sharing of different grain families and phases, with elevated dislocation activities believed to contribute to its relatively poor low-cycle fatigue lifetime compared to other magnesium alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Engineering, Mechanical

A three-dimensional mechanistic study of the drivers of classical twin nucleation and variant selection in Mg alloys: A mesoscale modelling and experimental study

Chaitanya Paramatmuni et al.

Summary: This work investigates twin inception in a 3D reconstructed microstructure, finding that stored energy density is a key factor in identifying the nucleation site in Mg alloy AZ31. The experimentally observed twin variant is driven by local twin resolved shear stress at the predicted nucleation site.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Engineering, Mechanical

Experimental and numerical analysis of cyclic deformation and fatigue behavior of a Mg-RE alloy

Meijuan Zhang et al.

Summary: Strain-controlled fatigue behavior of Mg?1Mn-0.5Nd alloy was studied, showing a correlation between the microstructure and twinning. Computational homogenization was used to simulate the mechanical response of the alloy, revealing the dominant deformation mechanisms.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Mechanics

Effect of twinning on the yield surface shape of Mg alloy plates under in-plane biaxial loading

H. Qiao et al.

Summary: The EVPSC-TDT model was used to investigate the yield behavior of a strongly basal textured Mg alloy plate under biaxial loading, with material parameters calibrated according to experimental uniaxial tension and compression tests. The predicted yield surface under various biaxial loadings matched well with experimental data, with the shape changes explained by activated deformation modes. Twining behaviors and their effects on the yield surface shape were also discussed, along with the influence of initial texture on the shape of the yield surface of Mg alloy plates.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

Article Nanoscience & Nanotechnology

On the role of slip, twinning and detwinning in magnesium alloy AZ31B sheet

Karol Frydrych et al.

Summary: The paper presents an experimental and numerical study on the deformation mechanisms in the AZ31B magnesium alloy sheet under cyclic in-plane tensile-compressive deformation, focusing on the influence of slip, twinning, and detwinning on mechanical response and texture evolution. A crystal plasticity model accounting for twinning and detwinning is formulated and identified using an evolutionary algorithm, with discussion on the predicted activity of deformation mechanisms in relation to experimental data.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Engineering, Mechanical

A crystal plasticity finite element model embedding strain-rate sensitivities inherent to deformation mechanisms: Application to alloy AZ31

William G. Feather et al.

Summary: This paper introduces a numerical method to embed any value of the power-law exponent in a crystal plasticity finite element model, reflecting the true material strain-rate sensitivity, and successfully applies it to predict the complex strain-rate sensitive response of AZ31 Mg alloy. Calculations show that the model captures the phenomena related to the effect of changing applied strain-rate on mechanical response.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Engineering, Mechanical

Grain-size effect on the deformation of Mg-3Al-3Sn alloy: Experiments and elastic-viscoplastic self-consistent modeling

Gaoming Zhu et al.

Summary: Grain refinement in Mg-3Al-3Sn alloy can increase yield strength while decreasing strain hardening exponent, with different slip modes being affected by the grain size. A model taking grain size into account successfully predicts the deformation behavior, showing that prismatic slip is the dominant mode in this alloy and coarse-grained samples exhibit higher dislocation nucleation coefficient due to twin formation.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Engineering, Mechanical

Spectral phase-field model of deformation twinning and plastic deformation

Xin Hu et al.

Summary: The study introduces a spectral phase-field method model of deformation twinning and plasticity, verified through studying the twinning morphology evolution and plastic deformation of Mg single crystals. Furthermore, the model is applied to investigate heterogeneous twinning nucleation, growth, and propagation behaviors, providing valuable insights into morphological evolution of deformation twinning and its effects on elasto-plastic responses of polycrystalline materials.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Materials Science, Multidisciplinary

Cyclic shear deformation and fatigue of extruded Mg-Gd-Y magnesium alloy

Fenghua Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Engineering, Mechanical

Polycrystal plasticity modeling for load reversals in commercially pure titanium

Jiaxiang Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Engineering, Mechanical

Interaction between a {10(1)over-bar2} twin boundary and grain boundaries in magnesium

Jing Tang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Engineering, Mechanical

Predicting forming limit diagrams for magnesium alloys using crystal plasticity finite elements

Hyuk Jong Bong et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Engineering, Mechanical

Modeling of 3D plastic anisotropy and asymmetry of extruded magnesium alloy and its applications in three-point bending

Fei-Fan Li et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Engineering, Mechanical

Strain hardening, twinning and texture evolution in magnesium alloy using the all twin variant polycrystal modelling approach

Sudeep K. Sahoo et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Materials Science, Multidisciplinary

Crystal plasticity modeling and neutron diffraction measurements of a magnesium AZ31B plate: Effects of plastic anisotropy and surrounding grains

Huamiao Wang et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

Article Nanoscience & Nanotechnology

Evolution of anelastic behaviour and twinning in cyclic loading of extruded magnesium alloy ZM21

Hossein Fallahi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Nanoscience & Nanotechnology

On plastic anisotropy and deformation history-driven anelasticity of an extruded magnesium alloy

Huai Wang et al.

SCRIPTA MATERIALIA (2020)

Article Metallurgy & Metallurgical Engineering

Investigation of the alloying effect on deformation behavior in Mg by Visco-Plastic Self-Consistent modeling

Alireza Maldar et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Article Materials Science, Multidisciplinary

Cyclic Strain Heterogeneity and Damage Formation in Rolled Magnesium Via In Situ Microscopic Image Correlation

N. Shafaghi et al.

EXPERIMENTAL MECHANICS (2020)

Article Engineering, Mechanical

Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading

Jaiveer Singh et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Engineering, Mechanical

Multiscale modeling of twinning and detwinning behavior of HCP polycrystals

Mohammadreza Yaghoobi et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Materials Science, Multidisciplinary

An experimental study of anisotropic fatigue behavior of rolled AZ31B magnesium alloy

Yuqian Wang et al.

MATERIALS & DESIGN (2020)

Article Engineering, Mechanical

Forming limits of magnesium alloy AZ31B sheet at elevated temperatures

Zihan Li et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Nanoscience & Nanotechnology

Effect of cyclic frequency on uniaxial ratcheting behavior of a textured AZ31B magnesium alloy under stress control

Baolin Wu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Engineering, Mechanical

Twin nucleation and variant selection in Mg alloys: An integrated crystal plasticity modelling and experimental approach

Chaitanya Paramatmuni et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Metallurgy & Metallurgical Engineering

Effect of pre-deformation on the activation stress of {10–12} twinning in Mg–3Al–1Zn alloy

Xiaoqian Guo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Nanoscience & Nanotechnology

Formation of macroscopic twin bands and inhomogeneous deformation during cyclic tension-compression loading of the Mg-wrought alloy AZ31

Kerstin Anten et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Engineering, Mechanical

Evaluation of a phenomenological elastic-plastic approach for magnesium alloys under multiaxial loading conditions

Vitor Anes et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)

Article Nanoscience & Nanotechnology

Numerical investigation of the influence of twinning/detwinning on fatigue crack initiation in AZ31 magnesium alloy

Fabien Briffod et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Engineering, Mechanical

Twinning and detwinning behaviors of commercially pure titanium sheets

Chao Ma et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Article Engineering, Mechanical

Quantification of cyclic twinning-detwinning behavior during low-cycle fatigue of pure magnesium using high energy X-ray diffraction

Aeriel D. Murphy-Leonard et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Article Engineering, Mechanical

Fatigue of ZEK100-F magnesium alloy: Characterisation and modelling

Yi Ling et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Article Nanoscience & Nanotechnology

Discontinuous and inhomogeneous strain distributions under monotonic and cyclic loading in textured wrought magnesium alloys

Josef Denk et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Materials Science, Multidisciplinary

Effects of initial {10-12} twins on cyclic deformation and fatigue of magnesium alloy at low strain amplitudes

Fenghua Wang et al.

MATERIALS CHARACTERIZATION (2019)

Article Materials Science, Multidisciplinary

Strain-Path Dependence of {10(1)over-bar2} Twinning in a Rolled Mg-3Al-1Zn Alloy: Influence of Twinning Model

Lingyu Zhao et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

Article Engineering, Mechanical

A cyclic small-strain plasticity model for wrought Mg alloys under multiaxial loading: Numerical implementation and validation

Ali A. Roostaei et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Article Engineering, Mechanical

Strain rate sensitivities of deformation mechanisms in magnesium alloys

Huamiao Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2018)

Article Mechanics

Effect of strain rate sensitivity in visco-plastic modeling

Adrien Chapuis et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Article Nanoscience & Nanotechnology

Role of twinning on the stress and strain behaviors during reverse loading in rolled magnesium alloy sheets

Takayuki Hama et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Engineering, Mechanical

Pseudoelastic and corrosion behaviors of Mg ZEK100 alloy under cyclic loading

Gang Chen et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Article Engineering, Mechanical

Impact of solute elements on detwinning in magnesium and its alloys

Yujie Cui et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Article Materials Science, Multidisciplinary

Fatigue of extruded AZ31B magnesium alloy under stress- and strain-controlled conditions including step loading

Fabio Castro et al.

MECHANICS OF MATERIALS (2017)

Article Materials Science, Multidisciplinary

On the rapid hardening and exhaustion of twinning in magnesium alloy

P. D. Wu et al.

ACTA MATERIALIA (2017)

Review Metallurgy & Metallurgical Engineering

Recent research and developments on wrought magnesium alloys

Sihang You et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2017)

Article Engineering, Multidisciplinary

A numerical procedure enabling accurate descriptions of strain rate-sensitive flow of polycrystals within crystal visco-plasticity theory

Marko Knezevic et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)

Article Nanoscience & Nanotechnology

Role of loading direction on cyclic behaviour characteristics of AM30 extrusion and its fatigue damage modelling

Ali A. Roostaei et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Materials Science, Multidisciplinary

Deformation twinning in hexagonal materials

Xiaozhou Liao et al.

MRS BULLETIN (2016)

Article Materials Science, Multidisciplinary

Modelling the role of slips and twins in magnesium alloys under cyclic shear

H. Wang et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

Article Engineering, Mechanical

Ratcheting and low-cycle fatigue characterizations of extruded AZ31B Mg alloy with and without corrosive environment

Gang Chen et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

Article Engineering, Mechanical

Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading

H. Qiao et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2015)

Article Mechanics

On twinning and anisotropy in rolled Mg alloy AZ31 under uniaxial compression

X. Q. Guo et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Article Mechanics

Evaluation of elastic-viscoplastic self-consistent polycrystal plasticity models for zirconium alloys

H. Qiao et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Article Materials Science, Multidisciplinary

Twinning effects in a polycrystalline magnesium alloy under cyclic deformation

C. F. Gu et al.

ACTA MATERIALIA (2014)

Article Materials Science, Multidisciplinary

Crystal plasticity based constitutive model for uniaxial ratchetting of polycrystalline magnesium alloy

Chao Yu et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

Article Engineering, Mechanical

Investigation of deformation dynamics in a wrought magnesium alloy

Wei Wu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Article Nanoscience & Nanotechnology

Uniaxial ratchetting of extruded AZ31 magnesium alloy: Effect of mean stress

Guozheng Kang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Materials Science, Multidisciplinary

In-Situ TEM Observation of Twinning and Detwinning During Cyclic Loading in Mg

Benjamin M. Morrow et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)

Article Mathematics, Applied

A practical constitutive model for AZ31B Mg alloy sheets with unusual stress-strain response

Ngoc-Trung Nguyen et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2013)

Article Engineering, Mechanical

A temperature-dependent elasto-plastic constitutive model for magnesium alloy AZ31 sheets

Ji Hoon Kim et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

Article Engineering, Mechanical

Modeling inelastic behavior of magnesium alloys during cyclic loading-unloading

H. Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

Article Engineering, Mechanical

A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms

H. Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

Article Nanoscience & Nanotechnology

Effect of twinning and detwinning on inelastic behavior during unloading in a magnesium alloy sheet

Takayuki Hama et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Nanoscience & Nanotechnology

Pseudoelastic behavior of magnesium alloy during twinning-dominated cyclic deformation

S. Y. Lee et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Nanoscience & Nanotechnology

Deformation dynamics study of a wrought magnesium alloy by real-time in situ neutron diffraction

Wei Wu et al.

SCRIPTA MATERIALIA (2013)

Article Engineering, Mechanical

An experimental study on cyclic deformation and fatigue of extruded ZK60 magnesium alloy

Qin Yu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

Article Nanoscience & Nanotechnology

Work-hardening behaviors of magnesium alloy sheet during in-plane cyclic loading

Takayuki Hama et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Nanoscience & Nanotechnology

A constitutive model of twinning and detwinning for hexagonal close packed polycrystals

H. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Nanoscience & Nanotechnology

Multiaxial fatigue of extruded AZ31B magnesium alloy

Ying Xiong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Nanoscience & Nanotechnology

Polycrystal modeling of tensile twinning in a Mg alloy during cyclic loading

C. F. Gu et al.

SCRIPTA MATERIALIA (2012)

Article Engineering, Mechanical

Crystal-plasticity finite-element analysis of inelastic behavior during unloading in a magnesium alloy sheet

Takayuki Hama et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

Article Nanoscience & Nanotechnology

Effects of extrusion ratio on the ratcheting behavior of extruded AZ31B magnesium alloy under asymmetrical uniaxial cyclic loading

X. P. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Article Engineering, Mechanical

An efficient constitutive model for room-temperature, low-rate plasticity of annealed Mg AZ31B sheet

M. Li et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2010)

Article Mechanics

Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet

H. Wang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)

Article Materials Science, Multidisciplinary

A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials

H. Wang et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)

Article Nanoscience & Nanotechnology

Effect of anisotropy on the low-cycle fatigue behavior of rolled AZ31 magnesium alloy

Sung Hyuk Park et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Article Metallurgy & Metallurgical Engineering

Very high cycle fatigue behaviour of as-extruded AZ31, AZ80, and ZK60 magnesium alloys

Frantisek Novy et al.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2009)

Article Materials Science, Multidisciplinary

EBSD Observation for Reversible Behavior of Deformation Twins in AZ31B Magnesium Alloy

Tsuyoshi Uota et al.

MATERIALS TRANSACTIONS (2009)

Article Materials Science, Multidisciplinary

Kinking nonlinear elasticity, damping and microyielding of hexagonal close-packed metals

A. G. Zhou et al.

ACTA MATERIALIA (2008)

Article Engineering, Mechanical

Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets

Myoung-Gyu Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

Article Nanoscience & Nanotechnology

Reversible plastic strain during cyclic loading-unloading of Mg and Mg-Zn alloys

G. E. Mann et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Article Materials Science, Multidisciplinary

Current wrought magnesium alloys: Strengths and weaknesses

CJ Bettles et al.

Article Materials Science, Multidisciplinary

Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading-unloading

CH Cáceres et al.

ACTA MATERIALIA (2003)

Article Engineering, Mechanical

A polycrystal plasticity model based on the mechanical threshold

S Kok et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

Article Materials Science, Multidisciplinary

Cyclic plasticity phenomena as predicted by polycrystal plasticity

LS Tóth et al.

MECHANICS OF MATERIALS (2000)