☆ 4.4 Article

Effect of TiB2 Particles on the Morphological, Mechanical and Corrosion Behaviour of Al7075 Metal Matrix Composite Produced Using Stir Casting Process

INTERNATIONAL JOURNAL OF METALCASTING (2022)

Related references

Note: Only part of the references are listed.

Article Metallurgy & Metallurgical Engineering

Influence of Speed and Sliding Distance on the Tribological Performance of Submicron Particulate Reinforced Al-12Si /1.5 Wt% B4C Composite

Deepak M. Shinde et al.

Summary: The study investigates the wear and friction performance of Al-12Si aluminum alloy reinforced with 1.5 wt% submicron boron carbide (B4C) particles. Results show that the dispersion of B4C particles in the aluminum matrix enhances wear resistance of the composite material. The wear mechanism is primarily influenced by adhesion and delamination in the base alloy, while the mechanically mixed layer plays a key role in the wear performance of the composite matrix.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation of Mechanical and Microstructure Properties of Mg-Modified Aluminum Matrix Composite by Vortical Casting Method

Saeed Pashmforoosh et al.

Summary: The study utilized vortical casting to enhance the wettability of ceramic particles and investigated the effect of magnesium modifier on the properties of A356 aluminum matrix composite reinforced with nano-alumina-micro-copper reinforcing particles. The addition of 7% volume of magnesium was found to produce a composite with uniform structure and good strength.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of the Effect of Sr on the Mechanical Properties and Microstructure of Nano-Alumina Reinforced Aluminum Matrix Composites by the Vortical Casting Method

Sadegh Shahriyari et al.

Summary: The study investigated the use of vortical casting to prevent the agglomeration of alumina nanoparticles in molten aluminum, with a focus on the influence of strontium as a reformer material on the microstructure of the composite substrate. Results showed that the optimal amount of strontium for modifying the eutectic structure of silicon and improving the wettability of the A356 alloy is 0.5%. Higher amounts of strontium led to the formation of intermetallic Al2Si2Sr particles, with the highest reported strength at 191 MPa.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of Al2O3Particle Size on Mechanical Properties of Ultrasonic-Assisted Stir-Casted Al A356 Matrix Composites

Ugur Aybarc et al.

Summary: Aluminum A356 alloy matrix composites reinforced with different fractions of Al(2)O(3) particles of two different sizes were produced and examined for their mechanical properties. The addition of 0.5 wt% nano-Al(2)O(3) resulted in the highest ultimate tensile strength and elongation among all compositions, with improvements in UTS and impact energy compared to the reference sample. Quality index calculations showed that 0.5 wt% nano-Al(2)O(3) addition yielded the optimum properties.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

Add to Collection

Article Chemistry, Physical

Comparative Study of Microstructure, Physical and Mechanical Characterization of SiC/TiB2Reinforced Aluminium Matrix Composite

Abhijit Bhowmik et al.

Summary: This study investigated the effect of SiC and TiB2 powder reinforced aluminium matrix composite fabricated by stir casting, revealing that the mechanical properties and hardness of the studied materials were improved. SEM analysis confirmed the uniform distribution of reinforcement particles in the aluminium matrix, and the results showed that the addition of particle reinforcement significantly enhanced the performance of the aluminium matrix composite.

SILICON (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Synthesis and Characterization of Aa2024-Sio2 Nanocomposites Through the Vortex Method

Mehrdad Shayan et al.

Summary: In this study, AA2024-SiO2np nanocomposites were prepared using the vortex method, and the effects of SiO2 content on microstructural and mechanical properties were investigated. The addition of 0.5vol% of nanoparticles improved mechanical properties significantly, but increased nanoparticle agglomeration at higher concentrations led to a decrease in mechanical performance of the composite.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

Add to Collection

Article

Impact of Heat Treatment Analysis on the Wear Behaviour of Al-14.2Si-0.3Mg-TiC Composite using Response Surface Methodology

V. Anilkumar et al.

Tribology in Industry (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Mechanical behaviour of age hardened A356/TiC metal matrix composite

Joiet Joseph et al.

Summary: The study investigated the mechanical performance of age-hardened A356/TiC. It was found that in the heat-treated composites, undissolved precipitates form an intermediate phase which increases mechanical properties, causing the hardness value to increase significantly.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Development and Characterization of In Situ AlSi5Cu3/TiB2 Composites

V. S. Ayar et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of TiB2 on the Corrosion Resistance Behavior of In Situ Al Composites

P. Senthil Kumar et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

50 Years of Foundry-Produced Metal Matrix Composites and Future Opportunities

Ajay P. Kumar et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Effect of B4C and MOS2 reinforcement on micro structure and wear properties of aluminum hybrid composite for automotive applications

Shoufa Liu et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Sliding Wear of the Ti-Reinforced Al Matrix Bi-metal Composite: A Potential Replacement to Conventional SiC-Reinforced Composites for Automotive Application

Ridvan Gecu et al.

INTERNATIONAL JOURNAL OF METALCASTING (2019)

Add to Collection

Article Engineering, Mechanical

Investigation on Mechanical Properties and Wear Behaviour of Titanium Diboride Reinforced Composites

M. Ramesh et al.

FME TRANSACTIONS (2019)

Add to Collection

Article Chemistry, Physical

Taguchi-Grey Multi-Response Optimization on Structural Parameters of Honeycomb Core Sandwich Structure for Low Velocity Impact Test

J. Suresh Kumar et al.

SILICON (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process

Y. Pazhouhanfar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Chemistry, Physical

Multi Response Optimization of AWJM Process Parameters on Machining TiB2 Particles Reinforced Al7075 Composite Using Taguchi-DEAR Methodology

M. Manoj et al.

SILICON (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

OPTIMIZING THE HEAT TREATMENT OF HIGH-STRENGTH 7075-TYPE WROUGHT ALLOYS: A METALLOGRAPHIC STUDY

Mohamed F. Ibrahim et al.

INTERNATIONAL JOURNAL OF METALCASTING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Corrosion of Aluminum Alloy Metal Matrix Composites in Neutral Chloride Solutions

Roland Tolulope Loto et al.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites

M. Karbalaei Akbari et al.

MATERIALS & DESIGN (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Recent developments in advanced aircraft aluminium alloys

Tolga Dursun et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical behavior and wear prediction of stir cast Al-TiB2 composites using response surface methodology

S. Suresh et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites

H. B. Michael Rajan et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Engineering, Multidisciplinary

Production and wear characterisation of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method

S. Gopalakrishnan et al.

COMPOSITES PART B-ENGINEERING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of production parameters on microstructure and wear resistance of powder metallurgy Al-Al2O3 composite

Mehdi Rahimian et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Grain refinement and wear properties evaluation of aluminum alloy 2014 matrix-TiB2 in-situ composites

C. Mallikarjuna et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and hardness of Al2O3 nanoparticle reinforced Al-Mg composites fabricated by reactive wetting and stir mixing

B. F. Schultz et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection

Article Nanoscience & Nanotechnology

A study on microstructure and mechanical properties of Al 6061-TiB2 in-situ composites

C. S. Ramesh et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy

B. Zaid et al.

CORROSION SCIENCE (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Study on abrasive and erosive wear behaviour of Al 6063/TiB2 in situ composites

K. Sivaprasad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites

Z. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Engineering, Mechanical

Tensile and wear behaviour of in situ Al-7Si/TiB2 particulate composites

S. Kumar et al.

WEAR (2008)

Add to Collection

Article Nanoscience & Nanotechnology

The grain refinement behavior of TiB2 particles prepared with in situ technology

Chunlei Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Hall-Petch relation and boundary strengthening

N Hansen

SCRIPTA MATERIALIA (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Localized alkaline corrosion of alloy AA5083 in neutral 3.5% NaCl solution

A Aballe et al.

CORROSION SCIENCE (2001)

Add to Collection

Article Instruments & Instrumentation

Material properties of titanium diboride

RG Munro

JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.