Related references
Note: Only part of the references are listed.Triply periodic minimal surfaces sandwich structures subjected to shock impact
Tran Phuong et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)
On multiaxial failure behavior of closed-cell aluminum foams under medium strain rates
Erdong Wang et al.
THIN-WALLED STRUCTURES (2021)
Transition boundaries and stiffness optimal design for multi-TPMS lattices
Fangxi Ren et al.
MATERIALS & DESIGN (2021)
Microlattice Metamaterials with Simultaneous Superior Acoustic and Mechanical Energy Absorption
Xinwei Li et al.
SMALL (2021)
3D printed sandwich beams with bioinspired cores: Mechanical performance and modelling
Chenxi Peng et al.
THIN-WALLED STRUCTURES (2021)
Impact analysis of a honeycomb-filled motorcycle helmet based on coupled head-helmet modelling
Shunfeng Li et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Achieving Triply Periodic Minimal Surface Thin-Walled Structures by Micro Laser Powder Bed Fusion Process
Shuo Qu et al.
MICROMACHINES (2021)
Inverse identification of cell-wall material properties of closed-cell aluminum foams based upon Vickers nano-indentation tests
Guangyong Sun et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Dynamic compressive behavior of a modified additively manufactured rhombic dodecahedron 316L stainless steel lattice structure
Xiaofei Cao et al.
THIN-WALLED STRUCTURES (2020)
Bioinspired functionally graded gyroid sandwich panel subjected to impulsive loadings
Chenxi Peng et al.
COMPOSITES PART B-ENGINEERING (2020)
Numerical and experimental studies on compressive behavior of Gyroid lattice cylindrical shells
Yongzhen Wang et al.
MATERIALS & DESIGN (2020)
Metallic microlattice and epoxy interpenetrating phase composites: Experimental and simulation studies on superior mechanical properties and their mechanisms
Xinwei Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Biological and mechanical property analysis for designed heterogeneous porous scaffolds based on the refined TPMS
Songhua Ma et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
On low-velocity impact response of foam-core sandwich panels
Xintao Huo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting
Shubo Gao et al.
ACTA MATERIALIA (2020)
Ti-6Al-4V ELI microlattice structures manufactured by electron beam melting: Effect of unit cell dimensions and morphology on mechanical behaviour
Gabriella Epasto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Oraib Al-Ketan et al.
ADVANCED ENGINEERING MATERIALS (2019)
Improving mechanical performance of fused deposition modeling lattice structures by a snap-fitting method
Wenfeng Liu et al.
MATERIALS & DESIGN (2019)
Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: Simulations & experiments
Colin Bonatti et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties
Lei Yang et al.
MATERIALS & DESIGN (2019)
Smooth-shell metamaterials of cubic symmetry: Anisotropic elasticity, yield strength and specific energy absorption
Colin Bonatti et al.
ACTA MATERIALIA (2019)
On hybrid cellular materials based on triply periodic minimal surfaces with extreme mechanical properties
Zeyao Chen et al.
MATERIALS & DESIGN (2019)
SLM lattice structures: Properties, performance, applications and challenges
Tobias Maconachie et al.
MATERIALS & DESIGN (2019)
Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing
I. Maskery et al.
POLYMER (2018)
Mechanical properties of an improved 3D-printed rhombic dodecahedron stainless steel lattice structure of variable cross section
Xiaofei Cao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Drop-weight impact characteristics of additively manufactured sandwich structures with different cellular designs
Amer Beharic et al.
MATERIALS & DESIGN (2018)
Microstructure-based experimental and numerical investigations on the sound absorption property of open-cell metallic foams manufactured by a template replication technique
Wei Zhai et al.
MATERIALS & DESIGN (2018)
Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting
Lei Yang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM
Miao Zhao et al.
MATERIALS (2018)
Enhanced out-of-plane compressive strength and energy absorption of 3D printed square and hexagonal honeycombs with variable-thickness cell edges
Shengyu Duan et al.
EXTREME MECHANICS LETTERS (2018)
Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading
Lei Zhang et al.
ADDITIVE MANUFACTURING (2018)
An investigation into reinforced and functionally graded lattice structures
Ian Maskery et al.
JOURNAL OF CELLULAR PLASTICS (2017)
Stiffness and yield strength of architectured foams based on the Schwarz Primitive triply periodic minimal surface
Dong-Wook Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Size effects in compression in Electron Beam Melted Ti6Al4V diamond structure lattices
S. J. N. Morrish et al.
MATERIALS LETTERS (2017)
Crashworthiness of graded cellular materials: A design strategy based on a nonlinear plastic shock model
Jie Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Static behavior of lattice structures produced via direct metal laser sintering technology
Vincenzo Crupi et al.
MATERIALS & DESIGN (2017)
Mechanical properties of 3D printed polymeric cellular materials with triply periodic minimal surface architectures
Diab W. Abueidda et al.
MATERIALS & DESIGN (2017)
Mechanical properties of periodic interpenetrating phase composites with novel architected microstructures
Oraib Al-Ketan et al.
COMPOSITE STRUCTURES (2017)
Enhanced out-of-plane crushing strength and energy absorption of in-plane graded honeycombs
Yong Tao et al.
COMPOSITES PART B-ENGINEERING (2017)
Mechanical analyses of Shellular, an ultralow-density material
Min Geun Lee et al.
ACTA MATERIALIA (2016)
Mechanical properties of 3D printed interpenetrating phase composites with novel architectured 3D solid-sheet reinforcements
Ahmed S. Dalaq et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Energy absorption in lattice structures in dynamics: Experiments
Zuhal Ozdemir et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Finite element prediction of effective elastic properties of interpenetrating phase composites with architectured 3D sheet reinforcements
Ahmed S. Dalaq et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Mechanical properties of additively manufactured octagonal honeycombs
R. Hedayati et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Mechanical response of Ti-6Al-4V octet-truss lattice structures
Liang Dong et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
S. Amin Yavari et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures
Peifeng Li
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The stiffness and strength of the gyroid lattice
S. N. Khaderi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)
Dynamic stress-strain states for metal foams using a 3D cellular model
Zhijun Zheng et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Advanced Porous Scaffold Design using Multi-Void Triply Periodic Minimal Surface Models with High Surface Area to Volume Ratios
Dong-Jin Yoo
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)
Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
M. Smith et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Compressive behaviour of stainless steel micro-lattice structures
R. Gumruk et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Dynamic crushing of cellular materials: Continuum-based wave models for the transitional and shock modes
Zhijun Zheng et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)
Finite Element Analysis of Schwarz P Surface Pore Geometries for Tissue-Engineered Scaffolds
Jaemin Shin et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2012)
Co-Continuous Composite Materials for Stiffness, Strength, and Energy Dissipation
Lifeng Wang et al.
ADVANCED MATERIALS (2011)
A theoretical and experimental study on metal hexagonal honeycomb crushing under quasi-static and low velocity impact loading
M. Zarei Mahmoudabadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing
Ferry P. W. Melchels et al.
ACTA BIOMATERIALIA (2010)
The quasi-static and blast loading response of lattice structures
S. McKown et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)
Properties of Ti-6Al-4V non-stochastic lattice structures fabricated via electron beam melting
O. Cansizoglu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Cross flow heat exchange of textile cellular metal core sandwich panels
J. Tian et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Modeling the progressive collapse behavior of metal foams
Sergey L. Lopatnikov et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2007)
Schwarz meets Schwann: Design and fabrication of biomorphic and durataxic tissue engineering scaffolds
Srinivasan Rajagopalan et al.
MEDICAL IMAGE ANALYSIS (2006)
High-velocity plate impact of metal foams
SL Lopatnikov et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2004)
Dynamics of metal foam deformation during Taylor cylinder-Hopkinson bar impact experiment
SL Lopatnikov et al.
COMPOSITE STRUCTURES (2003)
Optimal design of manufacturable three-dimensional composites with multifunctional characteristics
S Torquato et al.
JOURNAL OF APPLIED PHYSICS (2003)
Share Paper
