Journal
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
Volume 209, Issue -, Pages -Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijmecsci.2021.106708
Keywords
Backward-inclined jets in crossflow; Acoustic excitation; Turbulent jet; Fluids mixing property
Categories
Ask authors/readers for more resources
The article experiments on applying acoustic excitation to a backward-inclined jet in crossflow, revealing three characteristic flow modes: synchronized oscillating jet, transition, and synchronized shear-layer vortices. These modes result in significantly increased turbulence intensities, leading to enhanced jet-fluid dispersal and mixing capabilities.
Previous investigations revealed that the backward-inclined jet in crossflow exhibits seemingly lower transverse velocity and turbulence intensity at inclination angles higher than a critical value about 25 degrees, thus resulting in significantly low jet fluid dispersion properties. In this article, the acoustic excitations were applied to a backward-inclined jet in crossflow at an inclination angle higher than the critical value to examine experimentally whether the flow and dispersion characteristics could be improved or not. The flow in the test section of an open-loop wind tunnel was used as the crossflow. A profiled nozzle assembly with a loudspeaker installed in the lower part of it was used to generate the pulsating jet. The instantaneous and time-averaged smoke flow patterns were obtained by the laser-light-sheet assisted flow visualization method. The binary edge detection method was employed to the long-exposure smoke flow images to measure the jet spread width. The turbulence intensities, as well as the Lagrangian integral turbulence time and length scales, were obtained using a hotwire anemometer. The jet-fluid dispersion characteristics were examined using the tracer-gas detection technique. The results revealed that in the domain of jet pulsation intensity and excitation Strouhal number, the pulsed backward-inclined jet in crossflow presented three characteristic flow modes: synchronized oscillating jet, transition, and synchronized shear-layer vortices. The synchronized oscillating jet exhibited violent transverse oscillations due to the high axial jet pulsations induced by the acoustic excitation. The transverse jet width and jet penetration height were enlarged. The turbulence intensities were significantly increased, and the turbulence time and length scales were decreased, therefore led to a significant enhancement in the jet-fluid dispersions and mixing capabilities.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available