Related references
Note: Only part of the references are listed.In-situ construction of lithiophilic interphase in vertical micro-channels of 3D copper current collector for high performance lithium-metal batteries
Junru Wang et al.
ENERGY STORAGE MATERIALS (2021)
High-areal-capacity thick cathode with vertically-aligned micro-channels for advanced lithium ion batteries
Junru Wang et al.
ENERGY STORAGE MATERIALS (2021)
Effect of applied current density on the degradation behavior of anode-supported flat-tubular solid oxide fuel cells
Muhammad Zubair Khan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Durability of direct internal reforming of methanol as fuel for solid oxide fuel cell with double-sided cathodes
Yanlei Ru et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Numerical investigation of a direct ammonia tubular solid oxide fuel cell in comparison with hydrogen
Mustafa Ilbas et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Sr2Fe1.5+xMo0.5O6-δ cathode with exsolved Fe nanoparticles for enhanced CO2 electrolysis
Lihang Chen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Characterization and polarization DRT analysis of direct ethanol solid oxide fuel cells using low fuel partial pressures
Wenchao Song et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
A perspective on DRT applications for the analysis of solid oxide cell electrodes
Juan Xia et al.
ELECTROCHIMICA ACTA (2020)
Progress in metal-supported solid oxide electrolysis cells: A review
Michael C. Tucker
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Oxidation of porous stainless steel supports for metal-supported solid oxide fuel cells
Michael Reisert et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Redox stability of metal-supported fuel cells with nickel/gadolinium-doped ceria anode
Florian Thaler et al.
JOURNAL OF POWER SOURCES (2019)
In situ exsolved FeNi3 nanoparticles on nickel doped Sr2Fe1.5Mo0.5O6- perovskite for efficient electrochemical CO2 reduction reaction
Houfu Lv et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
A 3D Cu current collector with a biporous structure derived by a phase inversion tape casting method for stable Li metal anodes
Li-Min Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Improved microstructure and sintering temperature of bismuth nano-doped GDC powders synthesized by direct sol-gel combustion
G. Accardo et al.
CERAMICS INTERNATIONAL (2018)
Improving sulfur tolerance of Ni-YSZ anodes of solid oxide fuel cells by optimization of microstructure and operating conditions
Muhammad Taqi Mehran et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Oxidation behavior of a Ni-Fe support in SOFC anode atmosphere
Na Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Porous nickel-iron alloys as anode support for intermediate temperature solid oxide fuel cells: II. Cell performance and stability
Xin Wang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Degradation behavior of Ni-YSZ anode-supported solid oxide fuel cell (SOFC) as a function of H2S concentration
Ho Seong Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
A short review of cathode poisoning and corrosion in solid oxide fuel cell
Zhibin Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Influence of PVP content on degradation of PES/PVP membranes: Insights from characterization of membranes with controlled composition
Yamina Kourde-Hanafi et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Durability of symmetric-structured metal-supported solid oxide fuel cells
Michael C. Tucker
JOURNAL OF POWER SOURCES (2017)
Optimization of anode structure for intermediate temperature solid oxide fuel cell via phase-inversion cotape casting
Jie Lin et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Electrochemical Validation of In-Cell Chromium Getters to Mitigate Chromium Poisoning in SOFC Stack
Md Aman Uddin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Improving the water splitting performance of nickel electrodes by optimizing their pore structure using a phase inversion method
Ruigen Ding et al.
CATALYSIS SCIENCE & TECHNOLOGY (2017)
Fundamental mechanisms involved in the degradation of nickel yttria stabilized zirconia (Ni-YSZ) anode during solid oxide fuel cells operation: A review
Muhammad Shirjeel Khan et al.
CERAMICS INTERNATIONAL (2016)
Flexible solid oxide fuel cells supported on thin and porous metal
Hyoup Je Cho et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Fabrication of metal-supported tubular solid oxide fuel cell by phase-inversion method and in situ reduction
Zongying Han et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Facile one-step forming of NiO and yttrium-stabilized zirconia composite anodes with straight open pores for planar solid oxide fuel cell using phase-inversion tape casting method
Hua Huang et al.
JOURNAL OF POWER SOURCES (2015)
Recent fabrication techniques for micro-tubular solid oxide fuel cell support: A review
Siti Munira Jamil et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Effect of composition on microstructure and polarization resistance of solid oxide fuel cell anode Ni-YSZ composites made by co-precipitation
Xiuan Xi et al.
CERAMICS INTERNATIONAL (2014)
High performance Ni-Fe alloy supported SOFCs fabricated by low cost tape casting-screen printing-cofiring process
Kai Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Phase-inversion tape casting and oxygen permeation properties of supported ceramic membranes
Wei He et al.
JOURNAL OF MEMBRANE SCIENCE (2014)
Preparation of antifouling polyvinylpyrrolidone (PVP 40K) modified polyethersulfone (PES) ultrafiltration (UF) membrane for water purification
Banele Vatsha et al.
PHYSICS AND CHEMISTRY OF THE EARTH (2014)
Improved reoxidation tolerance of Ni-Fe metal support for LaGaO3 thin film electrolyte cell
Young-Wan Ju et al.
SOLID STATE IONICS (2012)
Exploring microstructural changes associated with oxidation in Ni-YSZ SOFC electrodes using high resolution X-ray computed tomography
P. R. Shearing et al.
SOLID STATE IONICS (2012)
Reoxidation behavior of Ni-Fe bimetallic anode substrate in solid oxide fuel cells using a thin LaGaO3 based film electrolyte
Young-Wan Ju et al.
JOURNAL OF POWER SOURCES (2011)
Durability of Ni anodes during reoxidation cycles
M. Ettler et al.
JOURNAL OF POWER SOURCES (2010)
Preparation of Ni-Fe bimetallic porous anode support for solid oxide fuel cells using LaGaO3 based electrolyte film with high power density
Young-Wan Ju et al.
JOURNAL OF POWER SOURCES (2010)
Bimetallic (Ni-Fe) anode-supported solid oxide fuel cells with gadolinia-doped ceria electrolyte
Hyeon Cheol Park et al.
JOURNAL OF POWER SOURCES (2009)
Redox stability of SOFC: Thermal analysis of Ni-YSZ composites
M. Pihlatie et al.
SOLID STATE IONICS (2009)
Intermediate temperature solid oxide fuel cells
Daniel J. L. Brett et al.
CHEMICAL SOCIETY REVIEWS (2008)
Ni-Fe alloy-supported intermediate temperature SOFCs using LaGaO3 electrolyte film for quick startup
Tatsumi Ishihara et al.
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2008)
Performance of metal-supported SOFCs with infiltrated electrodes
Michael C. Tucker et al.
JOURNAL OF POWER SOURCES (2007)
Thermodynamic considerations on Cr poisoning in SOFC cathodes
H. Yokokawa et al.
SOLID STATE IONICS (2006)
Reduction and re-oxidation of anodes for solid oxide fuel cells
J Malzbender et al.
SOLID STATE IONICS (2005)
Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodes
D Waldbillig et al.
SOLID STATE IONICS (2005)
Comparison of the performance of Cu-CeO2-YSZ and Ni-YSZ composite SOFC anodes with H2, CO, and syngas
O Costa-Nunes et al.
JOURNAL OF POWER SOURCES (2005)
Relationship between electrochemical properties of SOFC cathode and composition of oxide layer formed on metallic interconnects
K Fujita et al.
JOURNAL OF POWER SOURCES (2004)
Kinetics of oxidation and reduction of Ni/YSZ cermets
D Fouquet et al.
IONICS (2003)
Solid oxide fuel cells for stationary, mobile, and military applications
SC Singhal
SOLID STATE IONICS (2002)
Advances in solid oxide fuel cell technology
SC Singhal
SOLID STATE IONICS (2000)