4.7 Article

Mixing augmentation induced by the combination of the oblique shock wave and secondary recirculation jet in a supersonic crossflow

Related references

Note: Only part of the references are listed.
Article Engineering, Aerospace

Numerical investigation on mixing improvement mechanism of transverse injection based scramjet combustor

Gautam Choubey et al.

Summary: The research results indicate that the flame holding capacity of a hydrogen-fuelled supersonic combustor is better than an ethylene-fuelled combustor. The introduction of a shock generator can enhance the mixing of fuel with supersonic airflow.

ACTA ASTRONAUTICA (2021)

Article Engineering, Aerospace

Numerical study on the induced-ramp mixed and combustion characteristics of rocket-based combined cycle engine

Dai Jian et al.

Summary: This study discusses the supersonic flow mechanism and mixed characteristics of rocket-based combined cycle engines by changing the ramp angle and momentum flux ratio. Results show that increasing the ramp angle and momentum flux ratio can improve combustion efficiency and induce vortex structure for optimal penetration depth of jet fuel.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

Article Engineering, Aerospace

Wall temperature effects on shock wave/turbulent boundary layer interaction via direct numerical simulation

Ke Zhu et al.

Summary: The interaction between shockwave and turbulent boundary layer on a flat plate was investigated through direct numerical simulation at different wall temperatures. It was found that as the wall temperature increases, the skin friction decreases, resulting in stronger separation and increased turbulent kinetic energy on the heating wall. The study also observed an acceleration and amplification of the process of near-wall strip vortices evolving into complicated 3-dimensional structures at high wall temperatures.

ACTA ASTRONAUTICA (2021)

Article Energy & Fuels

Hydrogen fueled scramjet combustor with a wavy-wall double strut fuel injector

Obula Reddy Kummitha et al.

Summary: The global demand for enhanced scramjet engine performance is increasing, with the main challenge being the mixing of fuel and air. Research has shown that using a wavy wall surface and double strut fuel injector can significantly improve mixing efficiency and combustion phenomenon.
Article Computer Science, Interdisciplinary Applications

Effect of wavy wall strut fuel injector on shock wave development and mixing enhancement of fuel and air for a scramjet combustor

Obula Reddy Kummitha et al.

Summary: The study investigated the effects of shock wave generation using an unconventional strut under different flow conditions, and found that the wavy wall strut injector had a significant impact on shear mixing and turbulence.

JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2021)

Article Chemistry, Physical

Effect of a revolved wedge strut induced mixing enhancement for a hydrogen fueled scramjet combustor

Obula Reddy Kummitha et al.

Summary: The research introduces an innovative fuel injection strut to enhance mixing performance by increasing interactions between shock wave and shear mixing layer. Numerical analysis shows that the new strut significantly improves mixing efficiency compared to the basic wedge design.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Engineering, Aerospace

Design exploration on the shock wave/turbulence boundary layer control induced by the secondary recirculation jet

Zhao-bo Du et al.

Summary: This study investigated the control of separation bubbles caused by shock wave/boundary layer interaction (SWBLI) using secondary recirculation jet systems. Results showed that the secondary recirculation injection system effectively reduced the area of separation bubbles and the average wall heat flux. The design optimization process was validated through variance analysis and Duncan multiple range test, demonstrating good agreement with numerical simulations and balancing control effects.

ACTA ASTRONAUTICA (2021)

Article Chemistry, Physical

Effects of cavity-induced mixing enhancement under oblique shock wave interference: Numerical study

Zuo Qiuru et al.

Summary: This research numerically investigates the effects of oblique shock on mixing characteristics in a supersonic combustor equipped with a cavity, finding that oblique shock wave can enhance mixing efficiency within a certain range, with the optimal angle decreasing as the jet-to-crossflow pressure ratio increases.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Numerical analysis of hydrogen fueled scramjet combustor with innovative designs of strut injector

Obula Reddy Kummitha et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Engineering, Aerospace

Numerical study of flow structures and mixing characteristics of a sonic jet in supersonic crossflow

Chang-hai Liang et al.

ACTA ASTRONAUTICA (2020)

Article Engineering, Aerospace

The influence of the wedge shock generator on the vortex structure within the trapezoidal cavity at supersonic flow

Zhixiong Li et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Article Engineering, Aerospace

The influence of the sinusoidal shock generator on the mixing rate of multi hydrogen jets at supersonic flow

Yicheng Li et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Article Chemistry, Physical

Numerical simulation of mixing of hydrogen jet at supersonic cross flow in presence of upstream wavy wall

Tran Dinh Manh et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Engineering, Aerospace

Numerical investigation of upstream cavity enhanced fuel mixing in scramjet combustors

Tim Roos et al.

ACTA ASTRONAUTICA (2020)

Article Engineering, Aerospace

Numerical simulations of high frequency transverse pulsed jet injection into a supersonic crossflow

Nehemiah J. Williams et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Article Engineering, Aerospace

Flame stabilization enhancement in a strut-based supersonic combustor by shock wave generators

Bin An et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Review Engineering, Aerospace

Review of combustion stabilization for hypersonic airbreathing propulsion

Qili Liu et al.

PROGRESS IN AEROSPACE SCIENCES (2020)

Review Engineering, Aerospace

Supersonic mixing in airbreathing propulsion systems for hypersonic flights

Wei Huang et al.

PROGRESS IN AEROSPACE SCIENCES (2019)

Article Thermodynamics

RANS study of steady and pulsed gaseous jets into a supersonic crossflow

Zhao-bo Du et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Chemistry, Physical

URANS study of pulsed hydrogen jet characteristics and mixing enhancement in supersonic crossflow

Majie Zhao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Engineering, Aerospace

Mixing augmentation mechanism induced by the dual injection concept in shcramjet engines

Zhao-bo Du et al.

ACTA ASTRONAUTICA (2019)

Article Engineering, Aerospace

Shock wave structures in the wake of sonic transverse jet into a supersonic crossflow

Chang-hai Liang et al.

ACTA ASTRONAUTICA (2018)

Review Mechanics

Supersonic Combustion in Air-Breathing Propulsion Systems for Hypersonic Flight

Javier Urzay

ANNUAL REVIEW OF FLUID MECHANICS, VOL 50 (2018)

Article Thermodynamics

Mixing improvement induced by the combination of a micro-ramp with an air porthole in the transverse gaseous injection flow field

Lang-quan Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Engineering, Aerospace

Effects of micro-ramp on transverse jet in supersonic crossflow

Yujie Zhang et al.

ACTA ASTRONAUTICA (2016)

Article Chemistry, Physical

Investigation on supersonic combustion of hydrogen with variation of combustor inlet conditions

Vishnu Hariharan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Chemistry, Physical

Study of sonic injection from circular injector into a supersonic cross-flow using large eddy simulation

Majie Zhao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Engineering, Aerospace

Fluidic Control Method for Improving the Self-Starting Ability of Hypersonic Inlets

Jian-Yong Wang et al.

JOURNAL OF PROPULSION AND POWER (2016)

Article Engineering, Aerospace

Effects of Incident Shockwave on Flame-holding Downstream of Ramp Injector in Supersonic Flow

Yoshitaka Iwamura et al.

TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES (2016)

Article Thermodynamics

Large-eddy simulation of passive shock-wave/boundary-layer interaction control

Vito Pasquariello et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2014)