Related references
Note: Only part of the references are listed.Yttrium-Doped Barium Zirconate-Cerate Solid Solution as Proton Conducting Electrolyte: Why Higher Cerium Concentration Leads to Better Performance for Fuel Cells and Electrolysis Cells
Donglin Han et al.
ADVANCED ENERGY MATERIALS (2021)
Strength and hydrothermal stability of NiO?stabilized zirconia solid oxide cells fuel electrode supports
Peyman Khajavi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Double Torsion testing of thin porous zirconia supports for energy applications: Toughness and slow crack growth assessment
Peyman Khajavi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Improving the fracture toughness of stabilized zirconia-based solid oxide cells fuel electrode supports: Effects of type and concentration of stabilizer (s)
Peyman Khajavi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Highly efficient reversible protonic ceramic electrochemical cells for power generation and fuel production
Chuancheng Duan et al.
NATURE ENERGY (2019)
Electrochemical property of multi-layer anode supported solid oxide fuel cell fabricated through sequential tape-casting and co-firing
Xiaoyang Chen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
A novel low-thermal-budget approach for the co-production of ethylene and hydrogen via the electrochemical non-oxidative deprotonation of ethane
Dong Ding et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Electrochemical behavior and performances of Ni-BaZr0.1Ce0.7Y0.1Yb0.1O3-δ cermet anodes for protonic ceramic fuel cell
P. Pers et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells
Chuancheng Duan et al.
NATURE (2018)
Evaluation of performance and durability of Ni-BZY cermet electrodes with BZY electrolyte
Takayuki Onishi et al.
SOLID STATE IONICS (2018)
Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells
Sihyuk Choi et al.
NATURE ENERGY (2018)
Technical Assessment of Different Operating Conditions of an On-Board Autothermal Reformer for Fuel Cell Vehicles
Laura Tribioli et al.
ENERGIES (2017)
Stability and performance of robust dual-phase (ZrO2)0.89(Y2O3)0.01(Sc2O3)0.10-Al0.02Zn0.98O1.01 oxygen transport membranes
Steven Pirou et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Ion-conducting ceramic membrane reactors for high-temperature applications
Wendelin Deibert et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Benchmarking the expected stack manufacturing cost of next generation, intermediate-temperature protonic ceramic fuel cells with solid oxide fuel cell technology
Alexis Dubois et al.
JOURNAL OF POWER SOURCES (2017)
Shaping of 3YSZ porous substrates for oxygen separation membranes
Juan A. Escribano et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Long term testing of BCZY-based protonic ceramic fuel cell PCFC: Micro-generation profile and reversible production of hydrogen and electricity
Julian Dailly et al.
SOLID STATE IONICS (2017)
Development of composite steam electrodes for electrolyzers based on barium zirconate
Nuria Bausa et al.
SOLID STATE IONICS (2017)
Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells
Kiho Bae et al.
NATURE COMMUNICATIONS (2017)
Toughening of Y-doped BaZrO3 proton conducting electrolytes by hydration
Rokas Sazinas et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Thermo-electrochemical production of compressed hydrogen from methane with near-zero energy loss
Harald Malerod-Fjeld et al.
NATURE ENERGY (2017)
Methane steam reforming at low temperatures in a BaZr0.7Ce0.2Y0.1O2.9 proton conducting membrane reactor
V. Kyriakou et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2016)
Direct conversion of methane to aromatics in a catalytic co-ionic membrane reactor
S. H. Morejudo et al.
SCIENCE (2016)
High-performance thin-film protonic ceramic fuel cells fabricated on anode supports with a non-proton-conducting ceramic matrix
Kiho Bae et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Readily processed protonic ceramic fuel cells with high performance at low temperatures
Chuancheng Duan et al.
SCIENCE (2015)
Ammonia synthesis at atmospheric pressure in a BaCe0.2Zr0.7Y0.1O2.9 solid electrolyte cell
E. Vasileiou et al.
SOLID STATE IONICS (2015)
On-board Diesel Autothermal Reforming for PEM Fuel Cells: Simulation and Optimization
Raffaello Cozzolino et al.
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2014 (ICNAAM-2014) (2015)
Impedance of SOFC electrodes: A review and a comprehensive case study on the impedance of LSM:YSZ cathodes
Jimmi Nielsen et al.
ELECTROCHIMICA ACTA (2014)
BCY-based proton conducting ceramic cell: 1000 h of long term testing in fuel cell application
J. Dailly et al.
JOURNAL OF POWER SOURCES (2013)
Towards the Next Generation of Solid Oxide Fuel Cells Operating Below 600 °C with Chemically Stable Proton-Conducting Electrolytes
Emiliana Fabbri et al.
ADVANCED MATERIALS (2012)
Microstructure and performance of La0.58Sr0.4CO0.2Fe0.8O3-δ cathodes deposited on BaCe0.2Zr0.7Y0.1O3-δ by infiltration and spray pyrolysis
Sandrine Ricote et al.
JOURNAL OF POWER SOURCES (2012)
Evidence for space charge effects in Y-doped BaZrO3 from reduction experiments
Mona Shirpour et al.
SOLID STATE IONICS (2012)
Electrochemical properties of perovskite and A2MO4-type oxides used as cathodes in protonic ceramic half cells
J. Dailly et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2011)
Enhanced sintering and conductivity study of cobalt or nickel doped solid solution of barium cerate and zirconate
S. Ricote et al.
SOLID STATE IONICS (2010)
H2S poisoning and regeneration of Ni-BaZr0.1Ce0.7Y0.2O3-δ at intermediate temperature
Shumin Fang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Advanced Test Method of Solid Oxide Cells in a Plug-Flow Setup
Soren Hojgaard Jensen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Transport properties and stability of cobalt doped proton conducting oxides
Maria A. Azimova et al.
SOLID STATE IONICS (2009)
Water vapour solubility and conductivity study of the proton conductor BaCe(0.9 - x)ZrxY0.1O(3 - δ)
S. Ricote et al.
SOLID STATE IONICS (2009)
Chemical stability and hydrogen permeation performance of Ni-BaZr0.1Ce0.7Y0.2O3-δ in an H2S-containing atmosphere
Shumin Fang et al.
JOURNAL OF POWER SOURCES (2008)
Composite Ni-Ba(Zr0.1Ce0.7Y0.2)O3 membrane for hydrogen separation
Chendong Zuo et al.
JOURNAL OF POWER SOURCES (2006)
Effect of Zr-doping on the chemical stability and hydrogen permeation of the Ni-BaCe0.8Y0.2O3-α mixed protonic-electronic conductor
Chendong Zuo et al.
CHEMISTRY OF MATERIALS (2006)
A stable, easily sintered proton-conducting oxide electrolyte for moderate-temperature fuel cells and electrolyzers
Shanwen Tao et al.
ADVANCED MATERIALS (2006)
Enhanced sintering of yttrium-doped barium zirconate by addition of ZnO
P Babilo et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Hydrogen permeation and chemical stability of cermet [Ni-Ba(Zr0.8-xCexY0.2)O-3] membranes
CD Zuo et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)
Protonic conduction in Zr-substituted BaCeO3
K Katahira et al.
SOLID STATE IONICS (2000)
Share Paper
