4.7 Article

Effect of micro rib on aerothermal dynamic in channel flow

Journal

Publisher

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijheatmasstransfer.2021.121573

Keywords

Gas turbine cooling; Micro rib; Turbulent boundary layer; Heat transfer; Pressure loss

Funding

  1. Tsinghua University Initiative Scientific Research Program
  2. National Natural Science Foundation of China [51706116]

Ask authors/readers for more resources

The study evaluates turbulent flow heat transfer and pressure loss in a channel with different rib heights using numerical simulation and experimental research. Results show that heat transfer enhancement and reduced pressure loss can be achieved with changes in rib height, leading to better overall thermal performance.
In the present development of gas turbine, there is a main contradiction between the limited amount of cold air, the pressure head in the gas supply system and the large flow loss caused by the cooling unit inside the turbine blade. It leads to demands for the cooling techniques to provide efficient heat transfer with lower pressure loss. Surface micro turbulator is considered as a potential cooling technique. In this study, numerical simulation and experimental research were undertaken to evaluate the turbulent flow heat transfer and pressure loss in channel with a typical 2-D micro rib on one wall with different rib heights. Investigated rib heights range from 0.0013 similar to 0.053 of the channel hydraulic diameter ratio(h/D). The Reynolds number is kept at 20,000 to control the inlet boundary layer thickness, which makes the height of all cases located between the viscous layer and the log-law region in the boundary layer with a dimensionless height h(+) = 2 similar to 80. Reynolds-Averaged Navier-Stokes(RANS) and Large Eddy Simulation(LES) results were validated by experiment. The results show that the pressure loss and heat transfer show different trends with the h(+), which is mainly due to the enhancement of near-wall turbulence caused by the small rib height and the form drag caused by the large rib height. Furthermore, the analysis of near-wall turbulence characteristics given by LES indicates the enhancement of the normal turbulence fluctuation by the small rib within the turbulent boundary layer transition zone dominates the heat transfer enhancement downstream of the rib. the heat transfer is enhanced and the pressure loss is small when the rib height changes in the boundary layer, Which leads to a better overall thermal performance(OTP). The conclusion affirms that micro rib is a potential cooling technique to attain high heat transfer performance with low pressure loss. which is of great significance to enhance the overall efficiency of gas turbine. (C) 2021 Elsevier Ltd. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available