4.7 Article

Fatigue and micro-seismic behaviors of concrete disks exposed to cyclic Brazilian testing: A numerical investigation based on a 3D particle-based model

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Fatigue characteristics of concrete subjected to indirect cyclic tensile loading: Insights from deformation behavior, acoustic emissions and ultrasonic wave propagation

Zhengyang Song et al.

Summary: This work investigated the fatigue behaviour of concrete under indirect cyclic tensile loading through laboratory tests. The study analysed the effect of loading parameters on sample deformation, acoustic emission characteristics, P-wave speed evolution, and failure patterns. Comparison between monotonic loading and cyclic loading revealed the impact of stress paths on the distribution of cracks on the surface of concrete samples at failure.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Geological

Mechanical behavior of marble exposed to freeze-thaw-fatigue loading

Zhengyang Song et al.

Summary: The test results indicate that an increase in FT cycles and fatigue load level accelerates the damage rate of marble, leading to larger axial strain rate, radial strain rate, and increasing Poisson's ratio. A warning level is defined based on the evolution of radial strain and Poisson's ratio. Advance ratio and lag ratio are effective indicators for predicting rock failure when subjected to FTF actions.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

Review Green & Sustainable Science & Technology

Pervious concrete mixture optimization, physical, and mechanical properties and pavement design: A review

Othman AlShareedah et al.

Summary: This paper discusses the importance of pervious concrete and its role in urban green infrastructure. Through laboratory test results and reviews, it delves into the performance parameters and influencing factors of pervious concrete, as well as the future direction of research.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Environmental

Post-peak behaviour of rocks under cyclic loading using a double-criteria damage-controlled test method

Roohollah Shirani Faradonbeh et al.

Summary: Cyclic loading-induced hazards pose severe instability problems for surface and underground geotechnical projects. This study proposed an innovative double-criteria damage-controlled testing method to understand rock failure mechanisms under cyclic loading. The results showed slight increase in strength of rock specimens with increase in fatigue life in the pre-peak region due to cyclic loading-induced hardening, and a combination of class I and class II behaviors in the post-peak region during cyclic loading tests.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Article Engineering, Mechanical

Inhomogeneous mechanical behaviour of concrete subjected to monotonic and cyclic loading

Zhengyang Song et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Article Engineering, Civil

Stress-strain behavior and model of bamboo scrimber under cyclic axial compression

Yang Wei et al.

ENGINEERING STRUCTURES (2020)

Article Construction & Building Technology

Cyclic stress-strain rate-dependent response of rubberised concrete

B. Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Engineering, Geological

Water Saturation Effects on Thermal Infrared Radiation Features of Rock Materials During Deformation and Fracturing

Xin Cai et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Article Engineering, Mechanical

Fatigue damage response of typical crystalline and granular rocks to uniaxial cyclic compression

Rashid Geranmayeh Vaneghi et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Article Engineering, Geological

Experimental study on acoustic emission (AE) characteristics and crack classification during rock fracture in several basic lab tests

Kun Du et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Article Engineering, Geological

Bonded-particle model-based simulation of artificial rock subjected to cyclic loading

Zhengyang Song et al.

ACTA GEOTECHNICA (2019)

Article Engineering, Mechanical

Orientation-dependent deformation micro-mechanism and failure analysis of SS 316 under tensile and cyclic load

Atasi Ghosh et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Article Construction & Building Technology

Three-dimensional particle model based numerical simulation on multi-level compressive cyclic loading of concrete

Zhengyang Song et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Stability analysis of the underground infrastructure for pumped storage hydropower plants in closed coal mines

Javier Menendez et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

Review Engineering, Geological

Cyclic and Fatigue Behaviour of Rock Materials: Review, Interpretation and Research Perspectives

B. Cerfontaine et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Article Construction & Building Technology

Velocity-frequency-amplitude-dependent frictional resistance of planar joints under dynamic normal load (DNL) conditions

Wengang Dang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

Article Materials Science, Multidisciplinary

Experimental Investigation of Fracture Process Zone in Rocks Damaged Under Cyclic Loadings

M. Ghamgosar et al.

EXPERIMENTAL MECHANICS (2017)

Article Engineering, Mechanical

Discontinuous cyclic loading tests of salt with acoustic emission monitoring

Jinyang Fan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Article Multidisciplinary Sciences

History-independent cyclic response of nanotwinned metals

Qingsong Pan et al.

NATURE (2017)

Article Instruments & Instrumentation

Cyclic flattened Brazilian disc tests for measuring the tensile fatigue properties of brittle rocks

Yi Liu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2017)

Article Construction & Building Technology

Experimental Study on Cyclic Tensile Behavior of Concrete under High Stress Level

Xudong Chen et al.

ACI MATERIALS JOURNAL (2017)

Article Construction & Building Technology

Mechanical performances of steel fiber reinforced high strength concrete disc under cyclic loading

Chengdong Su et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Engineering, Geological

Experimental and Numerical Studies on Development of Fracture Process Zone (FPZ) in Rocks under Cyclic and Static Loadings

M. Ghamgosar et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Article Engineering, Mechanical

Fatigue behaviour of high-strength concrete with respect to strain and stiffness

Nadja Oneschkow

INTERNATIONAL JOURNAL OF FATIGUE (2016)

Article Construction & Building Technology

Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading

K. Wille et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Engineering, Geological

Tensile Fracture Strength of Brisbane Tuff by Static and Cyclic Loading Tests

N. Erarslan et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

Article Engineering, Geological

The Brazilian Disc Test for Rock Mechanics Applications: Review and New Insights

Diyuan Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2013)

Article Engineering, Mechanical

Mechanism of rock fatigue damage in terms of fracturing modes

N. Erarslan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

Article Mechanics

The Brazilian disc under parabolically varying load: Theoretical and experimental study of the displacement field

S. K. Kourkoulis et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

Article Engineering, Geological

Investigating the Effect of Cyclic Loading on the Indirect Tensile Strength of Rocks

N. Erarslan et al.

ROCK MECHANICS AND ROCK ENGINEERING (2012)

Article Engineering, Geological

Effects of cyclic loading on mechanical properties of Maha Sarakham salt

Kittitep Fuenkajorn et al.

ENGINEERING GEOLOGY (2010)

Article Engineering, Geological

Simulating stress corrosion with a bonded-particle model for rock

David O. Potyondy

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2007)

Article Engineering, Geological

Waveform effect on fatigue properties of intact sandstone in uniaxial cyclical loading

MN Bagde et al.

ROCK MECHANICS AND ROCK ENGINEERING (2005)

Article Construction & Building Technology

An overview of the fatigue behaviour of plain and fibre reinforced concrete

MK Lee et al.

CEMENT & CONCRETE COMPOSITES (2004)

Article Engineering, Geological

A bonded-particle model for rock

DO Potyondy et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)