Related references
Note: Only part of the references are listed.RESEARCH AND EDUCATION Effect of surface treatment and manufacturing process on the shear bond strength of veneering composite resin to polyetherketoneketone (PEKK) and polyetheretherketone (PEEK)
Diogo do Nascimento Machado Gouveia et al.
JOURNAL OF PROSTHETIC DENTISTRY (2022)
Effect of surface treatment and manufacturing process on the shear bond strength of veneering composite resin to polyetherketoneketone (PEKK) and polyetheretherketone (PEEK)
Diogo do Nascimento Machado Gouveia et al.
JOURNAL OF PROSTHETIC DENTISTRY (2022)
Application of sheet-like energy directors to ultrasonic welding of carbon fibre-reinforced thermoplastics
Shin-Ichi Takeda et al.
ADVANCED COMPOSITE MATERIALS (2021)
Method of measuring the mechanical properties of ferromagnetic materials based on magnetostrictive EMAT characteristic parameters
Ping Wang et al.
MEASUREMENT (2021)
Conical shell vibration control with distributed piezoelectric sensor and actuator layer
Rasa Jamshidi et al.
COMPOSITE STRUCTURES (2021)
Enhancing weld attributes in ultrasonic spot welding of carbon fibre-reinforced thermoplastic composites: Effect of sonotrode configurations and process control
Tian Zhao et al.
COMPOSITES PART B-ENGINEERING (2021)
Interface investigation between dissimilar materials by ultrasonic thermal welding by the third phase
Guohong Zhang et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)
Static ultrasonic welding of carbon fibre unidirectional thermoplastic materials and the influence of heat generation and heat transfer
F. Kohler et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Characterising the cavitation activity generated by an ultrasonic horn at varying tip-vibration amplitudes
Lukman Yusuf et al.
ULTRASONICS SONOCHEMISTRY (2021)
Ultrasonic Welding of PBT-GF30 (70% Polybutylene Terephthalate+30% Fiber Glass) and Expanded Polytetrafluoroethylene (e-PTFE)
Dan Dobrota et al.
POLYMERS (2021)
A self-piercing riveting method for joining of continuous carbon fiber reinforced composite and aluminum alloy sheets
Jian Wang et al.
COMPOSITE STRUCTURES (2021)
On the sensitivity of ultrasonic welding of epoxy- to polyetheretherketone (PEEK)-based composites to the heating time during the welding process
Eirini Tsiangou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Adhesive bonding of a mixed short and continuous carbon-fiber-reinforced Nylon-6 composite made via fused filament fabrication
M. Pizzorni et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)
A numerical analysis of an energy directing method through friction heating during the ultrasonic welding of thermoplastic composites
Shahan Tutunjian et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2020)
Continuous ultrasonic welding of thermoplastic composites: Enhancing the weld uniformity by changing the energy director
Bram Jongbloed et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Power ultrasound and its applications: A state-of-the-art review
Ye Yao et al.
ULTRASONICS SONOCHEMISTRY (2020)
Ultrasonic welding of all-polypropylene composites
Zoltan Kiss et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
High-speed consolidation and repair of carbon fiber/epoxy laminates through ultrasonic vibrations: A feasibility study
David Hoskins et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Ultrasonic welding of epoxy- to polyetheretherketone- based composites: Investigation on the material of the energy director and the thickness of the coupling layer
Eirini Tsiangou et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
A review on ultrasonic spot welding of copper alloys
Z. L. Ni et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Investigation on Ultrasonic Welding Attributes of Novel Carbon/Elium® Composites
Somen K. Bhudolia et al.
MATERIALS (2020)
A self-piercing-through riveting method for joining of discontinuous carbon fiber reinforced nylon 6 composite
Zhenghua Rao et al.
COMPOSITE STRUCTURES (2020)
Local shear strength distribution of ultrasonically welded hybrid Aluminium to CFRP joints
Florian Staab et al.
COMPOSITE STRUCTURES (2020)
Numerical study of the effect of core geometry on the performance of a magnetostrictive transducer
Danial Gandomzadeh et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)
Advances in Ultrasonic Welding of Thermoplastic Composites: A Review
Somen K. Bhudolia et al.
MATERIALS (2020)
Ultrasonic Welding of Novel Carbon/Elium® Thermoplastic Composites with Flat and Integrated Energy Directors: Lap Shear Characterisation and Fractographic Investigation
Somen K. Bhudolia et al.
MATERIALS (2020)
Thermal Welding by the Third Phase Between Polymers: A Review for Ultrasonic Weld Technology Developments
Jianhui Qiu et al.
POLYMERS (2020)
Ultrasonic welding of magnesium alloys: a review
Felice Rubino et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Fatigue response of ultrasonically welded carbon/Elium® thermoplastic composites
Somen K. Bhudolia et al.
MATERIALS LETTERS (2020)
Investigation of shear failure load in ultrasonic additive manufacturing of 3D CFRP/Ti structures
Sagil James et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
An integrated process-performance model of ultrasonic composite welding based on finite element and artificial neural network
Yang Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Application of ultrasonic welding to repair adhesively bonded short carbon fiber reinforced Nylon 6 composites
Guo-Peng Zhang et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
Characterization of multilayer ultrasonic welding based on the online monitoring of sonotrode displacement
Zunnong Ma et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effect of ultrasonic energy on the spot weldability of aluminum alloy AA6061
Umair Shah et al.
MATERIALS & DESIGN (2020)
Impact of ultrasonic welding on multi-layered Al-Cu joint for electric vehicle battery applications: A layer-wise microstructural analysis
Sisir Dhara et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Laser shock adhesion test numerical optimization for composite bonding assessment
Romain Ecault et al.
COMPOSITE STRUCTURES (2020)
Cold joining to fabricate large size metallic glasses by the ultrasonic vibrations
Xin Li et al.
SCRIPTA MATERIALIA (2020)
Review of Hybrid Fiber Based Composites with Nano Particles-Material Properties and Applications
Ayyappa Atmakuri et al.
POLYMERS (2020)
Online quality inspection of ultrasonic composite welding by combining artificial intelligence technologies with welding process signatures
Yang Li et al.
MATERIALS & DESIGN (2020)
Ultrasonic welding of novel Carbon/Elium® with carbon/epoxy composites
Goram Gohel et al.
COMPOSITES COMMUNICATIONS (2020)
A Numerical Analysis of the Temporal and Spatial Temperature Development during the Ultrasonic Spot Welding of Fibre-Reinforced Thermoplastics
Shahan Tutunjian et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2020)
Electromagnetic-pulse-induced acoustic testing for nondestructive testing of plastic composite/metal adhesive bonding
Hongjun Sun et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Investigation and characterization of ultrasonically welded GF/PA6T composites
R. Kalyan Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Evaluating the potential of forming spot-welded layups out of fibre reinforced thermoplastic tape without previous consolidation
Alexander Schug et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)
Fatigue properties of multifunctional metal- and carbon-fibre-reinforced polymers and intrinsic capabilities for damage monitoring
S. Backe et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Atomistic simulation of diffusion bonding of dissimilar materials undergoing ultrasonic welding
Avik Samanta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Ultrasonic torsion welding of ageing-resistant Al/CFRP joints: Properties, microstructure and joint formation
Florian Staab et al.
ULTRASONICS (2019)
Mechanical strength enhancement of ultrasonic metal welded Cu/Cu joint by Cu nanoparticles interlayer
Z. L. Ni et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Profile Monitoring and Fault Diagnosis Via Sensor Fusion for Ultrasonic Welding
Weihong (Grace) Guo et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Monitoring the Joint Area of Composite Membrane Materials
Hans Winger et al.
APPLIED SCIENCES-BASEL (2019)
Weld Quality Prediction in Ultrasonic Welding of Carbon Fiber Composite Based on an Ultrasonic Wave Transmission Model
Yang Li et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Molecular Dynamics Simulations of Atomic Diffusion during the Al-Cu Ultrasonic Welding Process
Jingwei Yang et al.
MATERIALS (2019)
Investigation on energy director-less ultrasonic welding of polyetherimide (PEI)- to epoxy-based composites
Eirini Tsiangou et al.
COMPOSITES PART B-ENGINEERING (2019)
Finite element analysis and simulation study of CFRP/Ti stacks using ultrasonic additive manufacturing
Sagil James et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Microstructure and Mechanical Properties of Resistance Heat-Assisted High-Power Ultrasonic Dissimilar Welded Cu/Al Joint
Huan Li et al.
METALS (2019)
Diagnostic of manufacturing defects in ultrasonically welded thermoplastic composite joints using ultrasonic guided waves
Pedro Ochoa et al.
NDT & E INTERNATIONAL (2019)
An Analysis of Mechanical Properties for Ultrasonically Welded Multiple C1220-Al1050 Layers
Jisun Kim et al.
APPLIED SCIENCES-BASEL (2019)
Ultrasonic Welding of Thermoplastic Composites
Irene Fernandez Villegas
FRONTIERS IN MATERIALS (2019)
Joining of carbon fiber and aluminum using ultrasonic additive manufacturing (UAM)
Hongqi Guo et al.
COMPOSITE STRUCTURES (2019)
Influence mechanism of welding time and energy director to the thermoplastic composite joints by ultrasonic welding
Wang Tao et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
A Control Method for the Ultrasonic Spot Welding of Fiber-Reinforced Thermoplastic Laminates through the Weld-Power Time Derivative
Shahan Tutunjian et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)
Processing of thermoplastic matrix composites through automated fiber placement and tape laying methods A review
Khaled Yassin et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)
Ultrasonic welding of carbon/epoxy and carbon/PEEK composites through a PEI thermoplastic coupling layer
Irene Fernandez Villegas et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization
Francesca Lionetto et al.
COMPOSITES PART B-ENGINEERING (2018)
Ultrasonic Welding of Carbon Fiber Reinforced Nylon 66 Composite Without Energy Director
Yu-Hao Gao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Ultrasonic Welding of Carbon Fiber Reinforced Composite With Variable Blank Holding Force
Yang Li et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Lay-Up and Consolidation of a Composite Pipe by In Situ Ultrasonic Welding of a Thermoplastic Matrix Composite Tape
Riccardo Dell'Anna et al.
MATERIALS (2018)
Use of Ultrasound in Reconditioning by Welding of Tools Used in the Process of Regenerating Rubber
Dan Dobrota et al.
MATERIALS (2018)
Microstructure and Mechanical Properties of Ultrasonic Spot Welded Mg/Al Alloy Dissimilar Joints
He Peng et al.
METALS (2018)
A study on amplitude transmission in ultrasonic welding of thermoplastic composites
Genevieve Palardy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Effect of Post-weld Heat Treatment on the Dissimilar Cu/Al Joints Pro-duced by High Power Ultrasonic Spot Welding
Xiaoyan Gu et al.
ISIJ INTERNATIONAL (2018)
Single-Sided Ultrasonic Welding of CF/Nylon 6 Composite without Energy Directors
WELDING JOURNAL (2018)
Microstructural Characterization and Mechanical Behavior of NiTi Shape Memory Alloys Ultrasonic Joints Using Cu Interlayer
Wei Zhang et al.
MATERIALS (2018)
Preliminary Study of Ultrasonic Welding as a Joining Process for Electrospun Nanofiber Mats
Emilia Wirth et al.
NANOMATERIALS (2018)
Acoustic horn design for joining metallic wire with flat metallic sheet by ultrasonic vibrations
Pradeep J. Kumar et al.
JOURNAL OF VIBROENGINEERING (2018)
Ultrasonic welding of CF/PPS composites with integrated triangular energy directors: melting, flow and weld strength development
Irene Fernandez Villegas et al.
COMPOSITE INTERFACES (2017)
Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites
Francesca Lionetto et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Influence of cold plasma treatment parameters on the mechanical properties of polyamide homogeneous bonded joints
C. Mandolfino et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Decomposition of ultrasonically welded carbon fiber/polyamide 66 and its effect on weld quality
Qian Zhi et al.
WELDING IN THE WORLD (2017)
Application of ultrasonic vibrations in welding and metal processing: A status review
S. Kumar et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Characterization of weld attributes in ultrasonic welding of short carbon fiber reinforced thermoplastic composites
Kaifeng Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Mathematical modeling and experimental verification of a novel single-actuated ultrasonic elliptical vibrator
Zhen Yin et al.
ADVANCES IN MECHANICAL ENGINEERING (2017)
Enhanced vibration damping and dynamic mechanical characteristics of composites with novel pseudo-thermoset matrix system
Somen K. Bhudolia et al.
COMPOSITE STRUCTURES (2017)
Ultrasonic dissimilar joining of aluminum alloy and polymer with the composite material of ABS polymer doping carbonized rice husk
Chin-Pao Cheng et al.
INTERNATIONAL CONFERENCE ON COMPOSITE MATERIAL, POLYMER SCIENCE AND ENGINEERING (CMPSE2017) (2017)
On the effect of flat energy directors thickness on heat generation during ultrasonic welding of thermoplastic composites
Genevieve Palardy et al.
COMPOSITE INTERFACES (2016)
Ultrasonic welding of polymer optical fibres onto composite materials
S. Shimada et al.
ELECTRONICS LETTERS (2016)
Modeling and experimental investigation of induction welding of thermoplastic composites and comparison with other welding processes
Patrice Gouin O'Shaughnessey et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Comparison of Ultrasonic Welding and Thermal Bonding for the Integration of Thin Film Metal Electrodes in Injection Molded Polymeric Lab-on-Chip Systems for Electrochemistry
Marco Matteucci et al.
SENSORS (2016)
Sonochemistry: Science and Engineering
Nimesh Pokhrel et al.
ULTRASONICS SONOCHEMISTRY (2016)
Zero-flow: a novel approach to continuous ultrasonic welding of CF/PPS thermoplastic composite plates
Frank Senders et al.
ADVANCED MANUFACTURING-POLYMER & COMPOSITES SCIENCE (2016)
Novel round energy director for use with servo-driven ultrasonic welder
Alex Savitski et al.
44TH ANNUAL SYMPOSIUM OF THE ULTRASONIC INDUSTRY ASSOCIATION, (UIA 44TH SYMPOSIUM) AND 45TH ANNUAL SYMPOSIUM OF THE ULTRASONIC INDUSTRY ASSOCIATION, (UIA 45TH SYMPOSIUM) (2016)
On avoiding thermal degradation during welding of high-performance thermoplastic composites to thermoset composites
Irene Fernandez Villegas et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Procedure for quality inspection of welds based on macro-photogrammetric three-dimensional reconstruction
M. Rodriguez-Martin et al.
OPTICS AND LASER TECHNOLOGY (2015)
Effect of glass fiber and crystallinity on light transmission during laser transmission welding of thermoplastics
Xin Feng Xu et al.
OPTICS AND LASER TECHNOLOGY (2015)
Strength development versus process data in ultrasonic welding of thermoplastic composites with flat energy directors and its application to the definition of optimum processing parameters
Irene Fernandez Villegas
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Modeling of the heating phenomena in ultrasonic welding of thermoplastic composites with flat energy directors
Arthur Levy et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Ultrasonic welding of thermoplastic composites: a numerical analysis at the mesoscopic scale relating processing parameters, flow of polymer and quality of adhesion
Arthur Levy et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2014)
Special Topic: Welded Metal/CFRP-Structures
Frank Balle et al.
ADVANCED ENGINEERING MATERIALS (2013)
Ultrasonic Welding of Aluminum Alloys to Fiber Reinforced Polymers
Guntram Wagner et al.
ADVANCED ENGINEERING MATERIALS (2013)
Ultrasonic activation of mendable polymer for self-healing carbon-epoxy laminates
K. Hargou et al.
COMPOSITES PART B-ENGINEERING (2013)
Process and performance evaluation of ultrasonic, induction and resistance welding of advanced thermoplastic composites
Irene Fernandez Villegas et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2013)
Three-dimensional micro electromechanical system piezoelectric ultrasound transducer
Arman Hajati et al.
APPLIED PHYSICS LETTERS (2012)
Ultrasonic Welding of Hybrid Joints
Guntram Wagner et al.
JOM (2012)
Statistical test planning for ultrasonic welding of dissimilar materials using the example of aluminum-carbon fiber reinforced polymers (CFRP) joints
F. Balle et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2012)
Comparison of ground and laser machined polycrystalline diamond (PCD) tools in cutting carbon fiber reinforced plastics (CFRP) for aircraft structures
Claus Dold et al.
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 (2012)
Ultrasonic Welding of Advanced Thermoplastic Composites: An Investigation on Energy-Directing Surfaces
Irene Fernandez Villegas et al.
ADVANCES IN POLYMER TECHNOLOGY (2010)
Finite element analysis of an inelastic interface in ultrasonic welded metal/fibre-reinforced polymer joints
N. Konchakova et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
Study on Heating Process of Ultrasonic Welding for Thermoplastics
Zongbo Zhang et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2010)
Ultrasonic bonding for thermoplastic microfluidic devices without energy director
Yi Luo et al.
MICROELECTRONIC ENGINEERING (2010)
Ultrasonic Metal Welding of Aluminium Sheets to Carbon Fibre Reinforced Thermoplastic Composites
Frank Balle et al.
ADVANCED ENGINEERING MATERIALS (2009)
FEM investigation of the temperature field of energy director during ultrasonic welding of PEEK composites
Xiaolin Wang et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2006)
Resistance welding of thermoplastic composites - an overview
D Stavrov et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Fusion bonding/welding of thermoplastic composites
A Yousefpour et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2004)
Investigation of non-linear free vibrations of fully clamped symmetrically laminated carbon-fibre-reinforced PEEK (AS4/APC2) rectangular composite panels
B Harras et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review
C Ageorges et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Moisture effects and acoustic emission characterization on lap shear strength in ultrasonic welded carbon/nylon composites
HK Liu et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Share Paper
