4.7 Article

Rectangular heat sink filled with PCM/ hybrid nanoparticles composites and cooled by intruded T-shaped cavity: Numerical investigation of thermal performance

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Effect of hybrid nanofluid on heat transfer performance of parabolic trough solar collector receiver

Recep Ekiciler et al.

Summary: This study investigates the three-dimensional heat transfer and flow characteristics of different hybrid nanofluids in a parabolic trough solar collector receiver under turbulent flow conditions. Results show that hybrid nanofluids outperform the base fluid in terms of heat transfer and flow features, with heat transfer enhancement correlated to Reynolds number and nanoparticle volume fraction. Among the tested nanofluids, Ag-MgO/Syltherm 800 with 4.0% nanoparticle volume fraction is identified as the most efficient working fluid for the PTC receiver.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Review Thermodynamics

A review on the properties, preparation, models and stability of hybrid nanofluids to optimize energy consumption

Hamed Eshgarf et al.

Summary: Nanofluids and hybrid nanofluids are new heat transfer media with superior heat transfer characteristics that have gained significant attention. Hybrid nanofluids exhibit more suitable heat transfer performance and thermophysical properties compared to traditional heat transfer fluids and single nanofluids. Current research focuses on investigating the properties, preparation, and stability of hybrid nanofluids.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Chemistry, Physical

The thermophysical properties and enhanced heat transfer performance of SiC-MWCNTs hybrid nanofluids for car radiator system

Xiaoke Li et al.

Summary: Hybrid nanofluids show promising potential in the field of heat transfer fluids, with studies showing significant enhancement in thermal conductivity and heat transfer performance. The experimentally studied silicon carbide-multiwalled carbon nanotubes hybrid nanofluids as coolants in automobile engine cooling systems exhibited improved thermophysical properties, with increased thermal conductivity as volume concentration increased. The application of SiC-MWCNTs hybrid nanofluids in car radiator systems demonstrates enhanced convective heat transfer coefficient compared to pure ethylene glycol, showcasing their potential benefits in heat transfer applications.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Engineering, Chemical

Towards convective heat transfer optimization in aluminum tube automotive radiators: Potential assessment of novel Fe2O3-TiO2/water hybrid nanofluid

Farrukh Abbas et al.

Summary: The study investigated the use of a novel hybrid nanofluid to enhance heat transfer in an automotive radiator, showing an increase in heat transfer rate by up to 26.7% under specific conditions. However, excessive nanoparticle concentration resulted in performance deterioration.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Article Engineering, Chemical

Preparation of stable TiO2-Graphene/Water hybrid nanofluids and development of a new correlation for thermal conductivity

Reza Bakhtiari et al.

Summary: The study investigated the thermal conductivity coefficient variation of TiO2-Graphene/Water hybrid nanofluid, showing that an increase in temperature and volume fraction enhances thermal conductivity. The effect of volume fraction on thermal conductivity was found to be larger than the effect of temperature, particularly at higher temperatures. A model was proposed to predict the thermal conductivity of nanofluids with a small margin of error, indicating good compatibility with experimental data.

POWDER TECHNOLOGY (2021)

Article Thermodynamics

Melting process of the nano-enhanced phase change material (NePCM) in an optimized design of shell and tube thermal energy storage (TES): Taguchi optimization approach

Mohammad Ghalambaz et al.

Summary: The study modeled and analyzed the performance of petal-shaped pipes in a shell and tube TES unit, finding that copper nanoparticles outperformed graphene oxide nanoparticles. In the optimal design, the geometric shape of the petal pipe was identified as the most important parameter for maximizing energy storage power in the TES unit.

APPLIED THERMAL ENGINEERING (2021)

Review Thermodynamics

Role of hybrid-nanofluid in heat transfer enhancement - A review

M. Muneeshwaran et al.

Summary: This paper reviews the current use of hybrid nanofluids in various heat transfer applications, summarizing existing research on the preparation and synthesis of various hybrid nanocomposites and hybrid nanofluids, tabulating the thermophysical values of different hybrid nanofluids, and discussing the hydrothermal behavior of hybrid nanofluids in heat transfer applications.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Chemistry, Physical

Particle size-dependent rheological behavior and mechanism of Al2O3-Cu/W hybrid nanofluids

Ming-yan Ma et al.

Summary: This study investigated the impact of different sizes of nanoparticles on the rheological properties of hybrid nanofluids, revealing that volume fraction and nanoparticle size both play significant roles in determining viscosity. Synergistic effects in hybrid nanofluids were found to influence nanoparticle arrangement, allowing for the manipulation of viscosity by adjusting nanoparticle size at different volume fractions.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Review Thermodynamics

Nano-enhanced phase change materials (NePCMs): A review of numerical simulations

Teng Xiong et al.

APPLIED THERMAL ENGINEERING (2020)

Review Thermodynamics

Nanoparticles enhanced phase change materials (NePCMs)-A recent review

Syeda Laraib Tariq et al.

APPLIED THERMAL ENGINEERING (2020)

Article Thermodynamics

Total enthalpy-based lattice Boltzmann simulations of melting in paraffin/metal foam composite phase change materials

Maximilian Gaedtke et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Chemistry, Physical

Thermophysical properties of Al2O3-CuO hybrid nanofluid at different nanoparticle mixture ratio: An experimental approach

V. Vicki Wanatasanappan et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Article Thermodynamics

The improved enthalpy-transforming based lattice Boltzmann model for solid-liquid phase change

Yutao Huo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Thermodynamics

Effect of heating modes on melting performance of a solid-liquid phase change using lattice Boltzmann model

Lu Cailei et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Article Thermodynamics

Free convection heat transfer and entropy generation analysis of water-Fe3O4/CNT hybrid nanofluid in a concentric annulus

Amin Shahsavar et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Review Thermodynamics

Performance enhancement of cold thermal energy storage system using nanofluid phase change materials: A review

Nor Azwadi Che Sidik et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

Hybrid lattice Boltzmann finite difference model for simulation of phase change in a ternary fluid

Reza Haghani Hassan Abadi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

Lattice Boltzmann simulation for three-dimensional natural convection with solid-liquid phase change

Yang Hu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

A Parallel Non-Dimensional Lattice Boltzmann Method for fluid flow and heat transfer with solid-liquid phase change

Yan Su et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

A novel lattice Boltzmann model for the solid-liquid phase change with the convection heat transfer in the porous media

Wei Wu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Engineering, Mechanical

Melting of nanoparticles-enhanced phase-change materials in an enclosure: Effect of hybrid nanoparticles

Mohammad Ghalambaz et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Article Thermodynamics

Lattice Boltzmann investigation of the solid-liquid phase change process in a cavity with protruding heater

Yutao Huo et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)

Review Green & Sustainable Science & Technology

State-of-art review on hybrid nanofluids

J. A. Ranga Babu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Green & Sustainable Science & Technology

Hybrid nanofluids preparation, thermal properties, heat transfer and friction factor - A review

L. Syam Sundar et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Materials Science, Multidisciplinary

Effects of nanoparticles on melting process with phase-change using the lattice Boltzmann method

Ahmed M. Ibrahem et al.

RESULTS IN PHYSICS (2017)

Article Materials Science, Multidisciplinary

Heat transfer enhancement with Ag-CuO/water hybrid nanofluid

Tanzila Hayat et al.

RESULTS IN PHYSICS (2017)

Article Mechanics

Conjugate heat transfer analysis of micro-channel using novel hybrid nanofluids (Al2O3 + Ag/Water)

Rajesh Nimmagadda et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2015)

Article Physics, Multidisciplinary

Double multiple-relaxation-time lattice Boltzmann model for solid-liquid phase change with natural convection in porous media

Qing Liu et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2015)

Review Green & Sustainable Science & Technology

A review on hybrid nanofluids: Recent research, development and applications

Jahar Sarkar et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Computer Science, Interdisciplinary Applications

An immersed boundary-thermal lattice Boltzmann method for solid-liquid phase change

Rongzong Huang et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2014)

Article Engineering, Electrical & Electronic

Preparation and Thermophysical Properties of Water-Glycerol Mixture-Based CuO Nanofluids as PCM for Cooling Applications

S. Harikrishnan et al.

IEEE TRANSACTIONS ON NANOTECHNOLOGY (2013)

Article Thermodynamics

A new lattice Boltzmann model for solid-liquid phase change

Rongzong Huang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Article Thermodynamics

Constructal design of T-shaped cavity for several convective fluxes imposed at the cavity surfaces

G. Lorenzini et al.

JOURNAL OF ENGINEERING THERMOPHYSICS (2013)

Article Thermodynamics

Numerical study of natural convection of a nanofluid in C-shaped enclosures

Mostafa Mahmoodi et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)

Article Chemistry, Physical

Synthesis of Al2O3-Cu/water hybrid nanofluids using two step method and its thermo physical properties

S. Suresh et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)

Article Thermodynamics

Experimental investigations and theoretical determination of thermal conductivity and viscosity of Al2O3/water nanofluid

M. Chandrasekar et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)

Article Nanoscience & Nanotechnology

Experimental study of thermal conductivity and phase change performance of nanofluids PCMs

Yu-Dong Liu et al.

MICROFLUIDICS AND NANOFLUIDICS (2009)

Article Thermodynamics

Lattice Boltzmann model for melting with natural convection

Christian Huber et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2008)

Article Physics, Multidisciplinary

A micro-convection model for thermal conductivity of nanofluids

HE Patel et al.

PRAMANA-JOURNAL OF PHYSICS (2005)

Article Thermodynamics

Lattice Boltzmann method for the heat conduction problem with phase change

WS Jiaung et al.

NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS (2001)