Related references
Note: Only part of the references are listed.Flame front progress in gas assisted iron ore sintering
Nicos Tsioutsios et al.
APPLIED THERMAL ENGINEERING (2020)
Recent progress in sustainable and energy-efficient technologies for sinter production in the iron and steel industry
Zhilong Cheng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Numerical Analysis of Heat and Mass Transfer Coupled With Gaseous Fuel Injection in Reactive Porous Media
Zhilong Cheng et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2019)
Waste heat recovery from high-temperature solid granular materials: Energy challenges and opportunities
Zhilong Cheng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Improvement of heat pattern and sinter strength at high charcoal proportion by applying ultra-lean gaseous fuel injection in iron ore sintering process
Zhilong Cheng et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Optimization of gaseous fuel injection for saving energy consumption and improving imbalance of heat distribution in iron ore sintering
Zhilong Cheng et al.
APPLIED ENERGY (2017)
Characteristics of charcoal combustion and its effects on iron-ore sintering performance
Zhilong Cheng et al.
APPLIED ENERGY (2016)
Sinter strength evaluation using process parameters under different conditions in iron ore sintering process
Zhilong Cheng et al.
APPLIED THERMAL ENGINEERING (2016)
Experimental study of commercial charcoal as alternative fuel for coke breeze in iron ore sintering process
Zhilong Cheng et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Improving Energy Efficiency in Iron Ore Sintering through Segregation: a Theoretical Investigation
Jiapei Zhao et al.
ISIJ INTERNATIONAL (2016)
Operational and environmental assessment on the use of charcoal in iron ore sinter production
Guilherme Correa Abreu et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Laboratory iron ore sintering studies. 1. Process simulation and airflow rate
C. Loo et al.
TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2014)
Yield and characteristics of shale oil from the retorting of oil shale and fine oil-shale ash mixtures
Mengting Niu et al.
APPLIED ENERGY (2013)
Effect of Oxygen Enrichment on Sintering with Combined Usage of Coke Breeze and Gaseous Fuel
Yuji Iwami et al.
ISIJ INTERNATIONAL (2013)
Laminar flow with combustion in inert porous media
Jose E. A. Coutinho et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2012)
Reducing CO2 emissions from oil shale semicoke smoldering combustion by varying the carbonate and fixed carbon contents
M. Sennoune et al.
COMBUSTION AND FLAME (2011)
Improved distribution of fuel particles in iron ore sintering process
P. Hou et al.
IRONMAKING & STEELMAKING (2011)
Development of Secondary-fuel Injection Technology for Energy Reduction in the Iron Ore Sintering Process
Nobuyuki Oyama et al.
ISIJ INTERNATIONAL (2011)
Analysis of turbulent combustion in inert porous media
Marcelo J. S. de Lemos
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)
EFFECT OF OXYGEN POTENTIAL AND FLUXING COMPONENTS ON PHASE RELATIONS DURING SINTERING OF IRON ORE
F. Kongoli et al.
JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY (2010)
Studies of the effect of retorting factors on the yield of shale oil for a new comprehensive utilization technology of oil shale
X. X. Han et al.
APPLIED ENERGY (2009)
Self-Sustaining Smoldering Combustion: A Novel Remediation Process for Non-Aqueous-Phase Liquids in Porous Media
C. Switzer et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2009)
Optimization of Coke Breeze Segregation in Sintering Bed under High Pisolite Ore Ratio
Satoshi Machida et al.
ISIJ INTERNATIONAL (2009)
Small-scale forward smouldering experiments for remediation of coal tar in inert media
Paolo Pironi et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Combustion characteristics in an iron ore sintering bed - evaluation of fuel substitution
Won Yang et al.
COMBUSTION AND FLAME (2006)
Mathematical modeling and optimization of two-layer sintering process for sinter quality and fuel efficiency using genetic algorithm
NK Nath et al.
MATERIALS AND MANUFACTURING PROCESSES (2005)
Share Paper
