Influence of CO2 at HPHT Conditions on the Properties and Failures of an Amine-Cured Epoxy Novolac Coating

Using a three-phase batch reactor with coated steel panels, this investigation studies the influence of carbon dioxide (CO2), present in the gas phase at conditions of high pressure and high temperature (HPHT), on the degradation of an amine-cured epoxy novolac (EN) coating. The combined effect of the gas, hydrocarbon, and seawater phase compromises the coating and leads to underfilm corrosion. Consequently, an understanding of the role of each of the phases is essential for the effective design of superior epoxy-based coatings for HPHT applications in the petroleum and other industries. Upon exposure to the three phases individually, at a low pressure of N-2, the EN network remained unaffected and impervious. However, in the hydrocarbon-exposed zone, a combination of para-xylene, representing the hydrocarbon phase, and CO2 at HPHT initiated glass-transition temperature depression with subsequent softening of the EN network. This allowed the dissolved CO2 gas to diffuse into the EN network, thereby generating pinholes at the coating surface. The seawater-exposed zone, in the presence of CO2 at HPI-IT, suffered from increased seawater ion diffusion, leading to blister formation. Moreover, the most detrimental subzone for the EN network was when CO2, para-xylene, and seawater were synergistically interacting at its hydrocarbon-seawater interface. This combination resulted in an increased chain motion of the EN network, subsequently allowing CO2 and seawater ions to diffuse into the EN network to the steel substrate, imposing underfilm corrosion. In the absence of CO2, blisters were formed at the interface subzone, but no corrosion was detected. The results are of high relevance to the petroleum industry but also for the protection of transport pipelines and process equipment in the next-generation carbon capture and storage technologies.

Automated summary

This study investigates the influence of CO2 in the gas phase on the degradation of an amine-cured epoxy novolac coating at high pressure and high temperature conditions. The combination of gas, hydrocarbon, and seawater phases compromises the coating and leads to underfilm corrosion.