☆ 4.7 Article

Understanding the role of nanoparticle size on energy, exergy, thermoeconomic, exergoeconomic, and sustainability analyses of an IC engine: A thermodynamic approach

FUEL PROCESSING TECHNOLOGY (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Measurement of the thermal conductivity of MWCNT-CuO/water hybrid nanofluid using artificial neural networks (ANNs)

Sara Rostami et al.

Summary: In this paper, artificial neural networks were developed to predict the thermal conductivity of multi-walled carbon nanotubes-CuO/water nanofluid, with the best ANN model and curve fitting method used to predict the behavior of the nanofluid. Results showed that the ANN outperformed in predicting k(nf) with better performance and correlation.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Improved thermal energy storage behavior of polyethylene glycol-based NEOPCM containing aluminum oxide nanoparticles for solar thermal applications

Alok Kumar Ansu et al.

Summary: A novel composite of PEG with aluminum oxide nanoparticles was prepared for solar thermal energy storage system. The thermal properties and chemical stability were studied by DSC and FT-IR analysis, and the thermal reliability was tested through 1500 melt/freeze cycles. The results showed significant thermal properties of the composites, making them a good candidate for latent heat thermal energy storage systems.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Materials Science, Ceramics

Non-isothermal decomposition kinetics of nano-scale CaCO3 as a function of particle size variation

Saibal Ray et al.

Summary: Nanocrystalline calcium carbonate with varying particle sizes was successfully synthesized using precipitation techniques from an aqueous solution at controlled pH. The particle size and crystallite size could be precisely controlled by changing the precursor concentration, and the apparent activation energy of decomposition decreased with decreasing average particle size of nanocrystalline calcium carbonate.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Thermodynamics

Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics

Manzoore Elahi M. Soudagar et al.

Summary: The study evaluated the performance and emission characteristics of a modified CRDI diesel engine fueled by RCME20 biodiesel blended with Sr@ZnO nanoparticles. Results indicated that under certain conditions, the engine performance was enhanced and emissions were reduced compared to RCME20 fuel.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Influence of Al2O3nano additives in ternary fuel (diesel-biodiesel-ethanol) blends operated in a single cylinder diesel engine: Performance, combustion and emission characteristics

Harish Venu et al.

Summary: The research shows that adding 20 ppm alumina nano additive in ternary fuel blend can enhance engine performance and combustion efficiency, while reducing exhaust emissions.

ENERGY (2021)

Add to Collection

Article Polymer Science

Improved dielectric properties of poly(vinylidene fluoride)-BaTiO3 composites by solvent-free processing

Elisabetta Brunengo et al.

Summary: Composites of PVDF and BaTiO3 nanoparticles fabricated through melt blending and compression molding exhibit improved dielectric properties, with increased permittivity and lower dielectric losses. Processing parameters play a key role in optimizing material performance.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Engineering three-dimensional nitrogen-doped carbon black embedding nitrogen-doped graphene anchoring ultrafine surface-clean Pd nanoparticles as efficient ethanol oxidation electrocatalyst

Shuwen Li et al.

Summary: Efficient electrocatalysts with low cost, high activity, and robust durability are crucial for large-scale commercialization of direct ethanol fuel cells. The Pd/NCB@NGS electrocatalyst, fabricated through self-assembly and surfactant-free chemical reduction, exhibits improved electrocatalytic performance for ethanol oxidation reaction due to its unique three-dimensional hierarchical architecture with abundant nitrogen atoms.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Engineering, Chemical

Ionanofluids with [C2mim][CH3SO3] ionic liquid and alumina nanoparticles: An experimental study on viscosity, specific heat and electrical conductivity

Elena Ionela Chereches et al.

Summary: This research experimentally studied the properties of 1-ethyl-3-methylimidazolium methanesulfonate ([C(2)mim][CH3SO3]) ionic liquid and its ionanofluids with Al2O3 nanoparticles of different mass concentrations, showing that viscosity and specific heat increase with nanoparticle concentration while electrical conductivity decreases. These new fluids have the potential to be alternative high temperature heat transfer fluids for solar applications.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

PdAg Nanoparticles with Different Sizes: Facile One-Step Synthesis and High Electrocatalytic Activity for Formic Acid Oxidation

Lei Yang et al.

Summary: The study successfully synthesized bimetallic PdAg nanoparticles with different particle sizes using a one-pot solvothermal co-reduction method and investigated their electrocatalytic performance for formic acid oxidation. The results demonstrated that incorporating carbon can optimize the electrocatalytic activity and stability of the alloy, leading to higher mass activity. The smaller PdAg-S/C exhibited the highest mass activity among the tested samples.

CHEMISTRY-AN ASIAN JOURNAL (2021)

Add to Collection

Article Thermodynamics

A numerical study on the effects of nanoparticles and stair fins on performance improvement of phase change thermal energy storages

M. E. Nakhchi et al.

Summary: This study examines the impact of CuO nanoparticles and stair fins on improving the efficiency of latent heat thermal energy storage units. The results show that by adding nanoparticles and using descending stair fins, the energy storage capacity can be greatly enhanced compared to pure PCM. Additionally, the downward fins with larger stair ratios perform significantly better due to free convection effects and recirculation flows.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Wastes to energy: Improving the poor properties of waste tire pyrolysis oil with waste cooking oil methyl ester and waste fusel alcohol-A detailed assessment on the combustion, emission, and performance characteristics of a CI engine

Umit Agbulut et al.

Summary: This study shows that the addition of waste biodiesel and fusel oil can improve the performance characteristics of waste tire pyrolysis oil diesel fuel blends, including increasing brake thermal efficiency, reducing brake specific fuel consumption, and lowering carbon monoxide and nitrogen oxide emissions. Waste tire pyrolysis oil-diesel fuel blends can also be an effective tool for waste management and an alternative to fossil fuels.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Exergetic and exergoeconomic analyses of a CI engine fueled with diesel-biodiesel blends containing various metal-oxide nanoparticles

Mustafa Karagoz et al.

Summary: In this study, comprehensive exergetic and exergoeconomic analyses were conducted on a single-cylinder, four-stroke diesel engine. Different nanofuels were tested at varying engine loads, with D90B10Al(2)O(3) showing the highest exergy efficiency and sustainability index values. Al2O3-doped nanofuel emerged as the best test fuel in terms of exergy, exergoeconomics, and sustainability analyzes.

ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improved mechanical/tribological properties of polyimide/carbon fabric composites by in situ-grown polyaniline nanofibers

Zhe Lin et al.

Summary: The study successfully grew polyaniline nanofibers and films on carbon fabric surfaces, enhancing interface compatibility and mechanical interlocking, leading to significantly improved thermal, mechanical, and tribological properties of the composite material.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Thermodynamics

Heat Transfer Enhancement From Inline and Staggered Arrays of Cylinders in a Heat Exchanger Using Alumina-Water Nanofluid

Mohd Asif et al.

Summary: The study investigated the flow of alumina-water nanofluid across heated circular tubes in a heat exchanger using the finite volume method. The use of smaller diameter nanoparticles and higher nanoparticle concentration was found to enhance heat transfer characteristics. The mean Nusselt number was consistently higher for staggered arrays compared to inline arrays, providing valuable insights for the optimal design of heat exchange systems under various operating conditions.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hollow IF-MoS2/r-GO Nanocomposite Filled Polyimide Coating with Improved Mechanical, Thermal and Tribological Properties

Jian Wu et al.

Summary: The use of HIF-MoS2/r-GO nanocomposite as filler in PI coating increases mechanical strength and thermal stability, while decreasing friction coefficient and wear rate.

COATINGS (2021)

Add to Collection

Article Chemistry, Physical

Tunable optical properties of Au nanoparticles encapsulated TiO2 spheres and their improved sunlight mediated photocatalytic activity

Jaspal Singh et al.

Summary: The synthesis of Au nanoparticles encapsulated TiO2 nanospheres with tunable optical properties has been reported in order to improve light absorption and charge carrier lifetime in photocatalysis. The formation of Au-TiO2 nanohybrids with enhanced photodegradation ability is attributed to the development of a Schottky interface between the two materials and an improved visible light-harvesting ability, which effectively decomposes organic molecules under sunlight.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Engineering, Environmental

Effect of Nanoparticle Size and Natural Organic Matter Composition on the Bioavailability of Polyvinylpyrrolidone-Coated Platinum Nanoparticles to a Model Freshwater Invertebrate

Mithun Sikder et al.

Summary: Laboratory experiments using the model freshwater snail Lymnaea stagnalis characterized the bioavailability of dissolved Pt(IV) and polyvinylpyrrolidone-coated platinum nanoparticles (PtNPs) of different sizes. The results showed that PtNPs had higher bioavailability than dissolved forms, and this bioavailability increased with nanoparticle diameter. The study also found that natural organic matter (NOM) suppressed the bioavailability of PtNPs, with a positive correlation between reduced sulfur content in NOM and PtNP bioavailability. The elimination of accumulated platinum after PtNP exposures exhibited a triphasic pattern, indicating potential in vivo PtNP dissolution.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Energy & Fuels

Performance optimization of an engine for canola oil blended diesel with Al2O3 nanoparticles through single and multi-objective optimization techniques

Praveen Ramesh et al.

Summary: By using canola oil blended fuel and aluminum oxide nanoparticles, optimization techniques effectively improve the combustion and emission performance of a diesel engine. Parameters such as canola oil blend percentage, nanoparticles concentration, fuel injection pressure, and fuel injection timing were considered in the optimization process, leading to the identification of the best value combination.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Improving the diesel engine performance, emissions and combustion characteristics using biodiesel with carbon nanomaterials

M. S. Gad et al.

Summary: The study improved diesel engine performance and emissions by adding carbon nanotubes and graphene nano sheets to biodiesel, achieving significant reductions in CO2 emissions.

FUEL (2021)

Add to Collection

Article Energy & Fuels

An evaluation based on energy and exergy analyses in SI engine fueled with waste bread bioethanol-gasoline blends

Bahar Sayin Kul et al.

Summary: The study evaluated the operation of an SI engine powered by blended bioethanol and gasoline through energy and exergy analyses. It was found that the addition of bioethanol generally decreased energy loss rate, exergy loss rate, and exergy destruction rate. While waste bread bioethanol did not perform as well as sugar beet bioethanol in terms of thermal efficiency and exergetic efficiency, both bioethanol types improved efficiency compared to gasoline.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Effect of CuO nanoparticles concentration on the performance and emission characteristics of the diesel engine running on jojoba (Simmondsia Chinensis) biodiesel

Pankaj Mohan Rastogi et al.

Summary: This study investigates the effects of CuO nanoparticles on the performance, emissions, and combustion characteristics of a diesel engine running on jojoba biodiesel blend (JB20). The results show that the addition of CuO nanoparticles to JB20 fuel can increase fuel thermal efficiency and reduce emissions.

FUEL (2021)

Add to Collection

Article Chemistry, Physical

Engine's behaviour on magnetite nanoparticles as additive and hydrogen addition of chicken fat methyl ester fuelled DICI engine: A dual fuel approach

Ameer Suhel et al.

Summary: The influence of magnetite nanoparticles and hydrogen induction on the combustion performance and exhaust emissions of CFME20 blend was evaluated in a 1-cylinder dual DICI engine. Results showed a significant reduction in emissions, especially oxides of nitrogen, with the nano-additive fuel. Performance parameters improved with escalating nanoparticles dosage. Hydrogen induction further decreased emissions and enhanced the BTE, although oxides of nitrogen increased with higher hydrogen flow rates.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Structural, dielectric, ferroelectric and optical properties of Er doped BiFeO3 nanoparticles

Subhash Sharma et al.

Summary: This study investigates the effect of Er doping on the properties of BiFeO3 nanoparticles, showing improvements in dielectric, electrical, and optical properties. The Er-doped BFO exhibits enhanced dielectric properties, better P-E loops, and potential applications in the visible spectrum, making it a promising candidate for memory device applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

The effect of nanoparticle sizes on the structural, optical and electrical properties of indium sulfide thin films consisting of In2S3 and In6S7 phases

Ramazan Demir et al.

Summary: Indium sulfide thin films were synthesized using chemical bath deposition method with different nanoparticle sizes, affecting the structural, compositional, optical, and electrical properties of the films. As nanoparticle size increased, S/In ratio decreased, direct band gap decreased, and sheet resistivity decreased.

JOURNAL OF MOLECULAR STRUCTURE (2021)

Add to Collection

Article Engineering, Chemical

An enhancement in the diesel engine performance, combustion, and emission attributes fueled by diesel-biodiesel and 3D silver thiocyanate nanoparticles additive fuel blends

Medhat Elkelawy et al.

Summary: The researchers found that the nanosized silver thiocyanate nanoparticles as additives in Diesel/Biodiesel fuel blends have a positive impact, reducing unburned hydrocarbons and smoke emissions, and improving combustion efficiency.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection

Article Thermodynamics

Experimental investigations on diesel engine using alumina nanoparticle fuel additive

Mohammed S. Gad et al.

Summary: Experimental work showed that adding 40 ppm alumina nanoparticles to diesel fuel can enhance thermal efficiency, reduce specific fuel consumption, and decrease emissions of smoke, HC, CO, and NOX. The addition of nanoparticles also improved fuel stability and prevented atomization problems and injector clogging.

ADVANCES IN MECHANICAL ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Engine performance, emission, and sustainability analysis with diesel fuel-based Shorea robusta methyl ester biodiesel blends

Ranjeet Kumar Rai et al.

Summary: The study found that increasing engine load, compression ratio, and the percentage of SRME biodiesel blend can enhance the efficiency and sustainability parameters of an engine, although it also leads to higher NO, UHC, and CO emissions. Increasing the percentage of SRME blend can increase NO emissions while reducing UHC and CO emissions.

FUEL (2021)

Add to Collection

Review Thermodynamics

A review of stability, thermophysical properties and impact of using nanofluids on the performance of refrigeration systems

Gokhan Yildiz et al.

Summary: The popularity of using nanoparticles in thermal engineering applications, particularly in refrigeration systems, is increasing. Nanofluids show improved thermal properties and system performance, but challenges such as stability and high viscosity need to be addressed for sustained performance improvement.

INTERNATIONAL JOURNAL OF REFRIGERATION (2021)

Add to Collection

Article Engineering, Mechanical

Effects of mono/hybrid nanofluid strategies and surfactants on machining performance in the drilling of Hastelloy X

Emine Sirin et al.

Summary: This study investigated the effects of different cooling/lubrication conditions on machining performance of nickel based superalloys during drilling. Results showed that SDS added hBN/GNP hybrid cutting performed the best in terms of cutting force, hole quality, burr height, and tool wear, while the best performance in cutting temperature was achieved under hBN/GNP hybrid cutting condition without surfactants.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Article Thermodynamics

Comparison in the effects of alumina, ceria and silica nanoparticle additives on the combustion and emission characteristics of a modern methanol-diesel dual-fuel CI engine

Jiangjun Wei et al.

Summary: The study investigated the use of alumina, ceria, and silica nanoparticles as fuel additives to improve the emissions of diesel engines fueled with methanol. Results showed that the addition of nanoparticles could shorten ignition delay, increase peak in-cylinder pressure, but had minimal impact on CO, HC, and smoke emissions.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Energy & Fuels

Collective effect of ternary nano fuel blends on the diesel engine performance and emissions characteristics

H. Fayaz et al.

Summary: This study evaluates the emission and performance characteristics of a CI engine using biodiesel blends with different nanoparticles. The addition of nanoparticles, particularly Al2O3, improves engine performance and reduces emissions significantly.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Experimental assessment of performance, combustion and emission characteristics of diesel engine fuelled by combined non-edible blends with nanoparticles

Abdulaziz A. Al-Kheraif et al.

Summary: This study focuses on utilizing Candle nut and Soap nut biodiesel as an alternative to conventional fuel, incorporating nanoalumina at a concentration of 25 ppm to analyze emission characteristics and engine performance. The results show that the nanoparticles improve engine performance significantly due to the increased surface area to volume ratio of Al2O3, leading to reductions in nitrous oxide, carbon monoxide, and hydrocarbon emissions at higher concentrations. Among the various biodiesel blends, 30B samples demonstrate the best results in reducing emissions.

FUEL (2021)

Add to Collection

Review Chemistry, Applied

Combustion behavior, performance and emission characteristics of diesel engine fuelled with biodiesel containing cerium oxide nanoparticles: A review

Anh Tuan Hoang

Summary: The addition of CeO2 nanoparticles into biodiesel has shown positive effects on improving fuel performance and emissions of diesel engines. However, further research is needed to investigate the impacts of CeO2 nanoparticles on particulate matter emissions, human health, and the environment.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Tribological properties of graphene nanoplatelets or boron nitride nanoparticles as additives of a polyalphaolefin base oil

Jose M. Lineira del Rio et al.

Summary: This study found that nanolubricants containing hexagonal boron nitride nanoparticles or graphene nanoplatelets can significantly reduce friction coefficients and wear, with the 0.50 wt% GnP nanodispersion showing the best performance. The reduction in wear was achieved through surface repairing and tribofilm formation mechanisms.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Energy & Fuels

Energy and exergy analysis of a diesel engine fuelled with diesel and biodiesel fuels at various engine speeds

Bengi Gozmen Sanli et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)

Add to Collection

Article Engineering, Environmental

Enhanced-absorption template method for preparation of double-shell NiO hollow nanospheres with controllable particle size for nanothermite application

Ning Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Thermodynamics

Effects of silicon dioxide nanoparticles on the performance and emission features at different injection timings using water diesel emulsified fuel

Deepti Khatri et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Energy & Fuels

Comparative study of nanoadditives TiO2, CNT, Al2O3, CuO and CeO2 on reduction of diesel engine emission operating on hydrogen fuel blends

S. Manigandan et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

An experimental study on energy-exergy analysis and sustainability index in a diesel engine with direct injection diesel-biodiesel-butanol fuel blends

Selcuk Sarikoc et al.

FUEL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Nanohybrid silica/polymer aerogels: The combined influence of polymer nanoparticle size and content

Alexandra Fidalgo et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Energy & Fuels

Impact of various metal-oxide based nanoparticles and biodiesel blends on the combustion, performance, emission, vibration and noise characteristics of a CI engine

Umit Agbulut et al.

FUEL (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Energy, exergy, economic and sustainability assessments of a compression ignition diesel engine fueled with tire pyrolytic oil - diesel blends

Mustafa Karagoz et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Thermodynamics

Combustion analysis and performance characteristics of compression ignition engines with diesel fuel supplemented with nano-TiO2 and nano-Al2O3

Hayder A. Dhahad et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

Add to Collection

Article Biochemistry & Molecular Biology

The Effect of Fe3O4Nanoparticle Size on Electrical Properties of Nanofluid Impregnated Paper and Trapping Analysis

Bin Du et al.

MOLECULES (2020)

Add to Collection

Article Energy & Fuels

Impact of n-butanol as an additive with eucalyptus biodiesel-diesel blends on the performance and emission parameters of the diesel engine

Rickwinder Singh et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

The examination of a compression-ignition engine powered by peanut oil biodiesel and diesel fuel in terms of energetic and exergetic performance parameters

Murat Kadir Yesilyurt

FUEL (2020)

Add to Collection

Article Energy & Fuels

Investigation on 1-heptanol as an oxygenated additive with diesel fuel for compression-ignition engine applications: An approach in terms of energy, exergy, exergoeconomic, enviroeconomic, and sustainability analyses

Battal Dogan et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

Investigation of performance and emission characteristics of an CI engine fuelled with diesel - waste tire oil - butanol blends

Mustafa Karagoz

FUEL (2020)

Add to Collection

Article Energy & Fuels

Comparative study of nanoparticles and alcoholic fuel additives-biodiesel-diesel blend for performance and emission improvements

M. A. Mujtaba et al.

FUEL (2020)

Add to Collection

Article Materials Science, Biomaterials

Nanoparticle size and chemical modification play a crucial role in the interaction of nano gold with the brain: extent of accumulation and toxicity

Nouf N. Mahmoud et al.

BIOMATERIALS SCIENCE (2020)

Add to Collection

Review Engineering, Mechanical

Improved Performance, Combustion and Emissions of SI Engine Fuelled with Butanol: A Review

I. Veza et al.

INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

Energetic and exergetic performance of a diesel engine fueled with diesel and microalgae biodiesel

Bengi Gozmen Sanli

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)

Add to Collection

Article Environmental Sciences

An experimental assessment on the influence of fuel-borne additives on ternary fuel (diesel-biodiesel-ethanol) blends operated in a single cylinder diesel engine

Harish Venu

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Add to Collection

Article Environmental Sciences

A comprehensive study on emission and performance characteristics of a diesel engine fueled with nanoparticle-blended biodiesel

Yuvarajan Devarajan et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Add to Collection

Article Engineering, Mechanical

Experimental investigation of combustion, performance and emission characteristics of a diesel engine fuelled with diesel-biodiesel-alcohol blends

Umit Agbulut et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Performance, emission, energy and exergy analyses of gasoline fumigated DI diesel engine

M. Bharathiraja et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Energy & Fuels

Analysis of the fuel injection pressure effects on energy and exergy efficiencies of a diesel engine operating with biodiesel

Murat Kadir Yesilyurt et al.

BIOFUELS-UK (2019)

Add to Collection

Article Chemistry, Physical

Effect of a novel clay/silica nanocomposite on water-based drilling fluids: Improvements in rheological and filtration properties

Goshtasp Cheraghian et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)

Add to Collection

Article Thermodynamics

Combustion characteristics, engine performances and emissions of a diesel engine using nanoparticle-diesel fuel blends with aluminium oxide, carbon nanotubes and silicon oxide

Ang F. Chen et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection

Article Energy & Fuels

Combustion, performance and emission characteristics of various alcohol blends in a single cylinder diesel engine

A. Osman Emiroglu et al.

FUEL (2018)

Add to Collection

Article Energy & Fuels

Effect of nanoparticle on emission and performance characteristics of a diesel engine fueled with cashew nut shell biodiesel

Santhanakrishnan Radhakrishnan et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2018)

Add to Collection

Article Energy & Fuels

A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel-biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part II - Exergetic analysis

Mortaza Aghbashlo et al.

FUEL (2017)

Add to Collection

Article Engineering, Chemical

Rheological Properties of Partially Hydrolyzed Polyacrylamide Seeded by Nanoparticles

Zhongliang Hu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Add to Collection

Article Chemistry, Physical

Size-dependent catalytic activity over carbon-supported palladium nanoparticles in dehydrogenation of formic acid

Junjie Li et al.

JOURNAL OF CATALYSIS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Theoretical and experimental study on the effects of particle size and temperature on the reaction kinetics of cubic nano-Cu2O

Huanfeng Tang et al.

JOURNAL OF NANOPARTICLE RESEARCH (2017)

Add to Collection

Article Environmental Studies

Thermodynamic, environmental and economic effects of diesel and biodiesel fuels on exhaust emissions and nano-particles of a diesel engine

Hakan Caliskan et al.

TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT (2017)

Add to Collection

Review Engineering, Multidisciplinary

Particle Size and Crystal Phase Effects in Fischer-Tropsch Catalysts

Jin-Xun Liu et al.

ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Experimental analysis on performance of diesel engine using mixture of diesel and bio-diesel as a working fuel with aluminum oxide nanoparticle additive

Harish Kumar Patel et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2017)

Add to Collection

Article Chemistry, Analytical

Effect of particle size on activation energy and peak temperature of the thermoluminescence glow curve of undoped ZnS nanoparticles

B. P. Chandra et al.

LUMINESCENCE (2016)

Add to Collection

Article Energy & Fuels

Experimental assessment of performance and emissions maps for biodiesel fueled compression ignition engine

Kezrane Cheikh et al.

APPLIED ENERGY (2016)

Add to Collection

Article Thermodynamics

Exergy and Energy Analysis of Combustion of Blended Levels of Biodiesel, Ethanol and Diesel Fuel in a DI Diesel Engine

Golmohammad Khoobbakht et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Physics, Multidisciplinary

Energy and Exergy Analyses of a Diesel Engine Fuelled with Biodiesel-Diesel Blends Containing 5% Bioethanol

Bahar Sayin Kul et al.

ENTROPY (2016)

Add to Collection

Article Energy & Fuels

Comparison of performance and emissions characteristics of DI CI engine fueled with dual biodiesel blends of palm and jatropha

Ankur Nalgundwar et al.

FUEL (2016)

Add to Collection

Review Green & Sustainable Science & Technology

A review of the effect of hydrogen addition on the performance and emissions of the compression - Ignition engine

Hayder A. Alrazen et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Chemistry, Physical

Exceptional size-dependent catalytic activity enhancement in the room-temperature hydrogen generation from formic acid over bimetallic nanoparticles supported by porous carbon

Jia Cheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Energy & Fuels

Experimental investigation of the performance and emission characteristics of direct injection diesel engine by water emulsion diesel under varying engine load condition

M. Ebna Alam Fahd et al.

APPLIED ENERGY (2013)

Add to Collection

Article Thermodynamics

Biodiesel from cotton seed oil and its effect on engine performance and exhaust emissions

Md. Nurun Nabi et al.

APPLIED THERMAL ENGINEERING (2009)

Add to Collection

Article Thermodynamics

Performance assessment of an internal combustion engine at varying dead (reference) state temperatures

Hakan Caliskan et al.

APPLIED THERMAL ENGINEERING (2009)

Add to Collection

Article Energy & Fuels

Energy and exergy analyses of a diesel engine fuelled with various biodiesels

Mustafa Canakci et al.

ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY (2006)

Add to Collection

Article Thermodynamics

SPECO: A systematic and general methodology for calculating efficiencies and costs in thermal systems

A Lazzaretto et al.

ENERGY (2006)

Add to Collection

Article Thermodynamics

Thermoeconomic analysis of power plants: an application to a coal fired electrical generating station

MA Rosen et al.

ENERGY CONVERSION AND MANAGEMENT (2003)

Add to Collection

Article Thermodynamics

On the destruction of availability (exergy) due to combustion processes - with specific application to internal-combustion engines

JA Caton

ENERGY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.