Related references
Note: Only part of the references are listed.Study of pore-scale coke combustion in porous media using lattice Boltzmann method
Timan Lei et al.
COMBUSTION AND FLAME (2021)
Combustion Wave Propagation of a Modular Porous Burner with Annular Heat Recirculation
Fuqiang Song et al.
JOURNAL OF THERMAL SCIENCE (2020)
The effects of porous wall as a novel flame stabilization method on flame characteristics in a premixed burner for CH4/air mixture by numerical simulation
Mandi Mollamandi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2020)
Preparation of porous adsorbent via Pickering emulsion template for water treatment: A review
Yongfeng Zhu et al.
JOURNAL OF ENVIRONMENTAL SCIENCES (2020)
A pore level study of syngas production in two-layer burner formed by staggered arrangement of particles
Junrui Shi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Experimental studies on biogas combustion in a novel double layer inert Porous Radiant Burner
Sangjukta Devi et al.
RENEWABLE ENERGY (2020)
Investigation on premixed H2/C3H8/air combustion in porous medium combustor for the micro thermophotovoltaic application
Qingguo Peng et al.
APPLIED ENERGY (2020)
Transient ellipsoidal combustion model for a porous burner in microgravity
Akshit Markan et al.
COMBUSTION AND FLAME (2020)
Experimental investigation of lean premixed pre-vaporized liquid-fuel combustion in porous media burners at elevated pressures up to 20 bar
Sadaf Sobhani et al.
COMBUSTION AND FLAME (2020)
Low-temperature combustion behavior of crude oils in porous media under air flow condition for in-situ combustion (ISC) process
Chengdong Yuan et al.
FUEL (2020)
Performance trends in wall-flow diesel particulate filters: Comparative analysis of their filtration efficiency and pressure drop
M. Pilar Orihuela et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Lipid membranes supported by planar porous substrates
Yanping Sun et al.
CHEMISTRY AND PHYSICS OF LIPIDS (2020)
Study on heat and mass transfer of a planar membrane humidifier for PEM fuel cell
Wei-Mon Yan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
A numerical study on the effect of static magnetic field on the hemodynamics of magnetic fluid in biological porous media
Seyed Mahdi Hosseinikhah et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
3D numerical study on syngas production in a structured packed bed with connected pellets
Junrui Shi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Study of LPG and Biogas Combustion in Two-Layer Porous Radiant Burners (PRBs)
Sangjukta Devi et al.
ADVANCES IN MECHANICAL ENGINEERING, ICRIDME 2018 (2020)
Application of SiO2-water nanofluid to enhance oil recovery A new hybrid optimization approach using pattern search and PSO algorithms
Milad Ramezanpour et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)
Effects of heat transfer on flame stability limits in a planar micro-combustor partially filled with porous medium
Qingqing Li et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)
The role of local thermal non-equilibrium in modelling smouldering combustion of organic liquids
Marco A. B. Zanoni et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)
Numerical study of the flame stability of premixed methane-air combustion in a combined porous-free flame burner
Seyed Mohammad Hashemi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2019)
Experimental and numerical study on the lean premixed filtration combustion of propane/air in porous medium
Hongsheng Liu et al.
APPLIED THERMAL ENGINEERING (2019)
Sensitivity analysis and performance evaluation of the PEMFC using wave-like porous ribs
Hossein Pourrahmani et al.
APPLIED THERMAL ENGINEERING (2019)
A review of water injection applied on the internal combustion engine
Sipeng Zhu et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Simultaneous reduction of CO and NOx emissions as well as fuel consumption by using water and nano particles in Diesel-Biodiesel blend
Ayat Gharehghani et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Self-aspirating/air-preheating porous medium gas burner
Aekkaphon Chaelek et al.
APPLIED THERMAL ENGINEERING (2019)
Thermodynamic simulation of porous-medium combustion chamber under diesel engine-like conditions
M. Saghaei et al.
APPLIED THERMAL ENGINEERING (2019)
Design of three-layered struts in SiC reticulated porous ceramics for porous burner
Xiong Liang et al.
CERAMICS INTERNATIONAL (2019)
Numerical investigation on heat extraction performance of a multilateral-well enhanced geothermal system with a discrete fracture network
Yu Shi et al.
FUEL (2019)
Potentials of porous materials for energy management in heat exchangers - A comprehensive review
Saman Rashidi et al.
APPLIED ENERGY (2019)
Design, manufacture and testing of porous materials with ordered and random porosity: Application to porous medium burners
Mykhailo Samoilenko et al.
APPLIED THERMAL ENGINEERING (2019)
Numerical study and optimization of a porous burner with annular heat recirculation
Fuqiang Song et al.
APPLIED THERMAL ENGINEERING (2019)
Self-propagating high-temperature synthesis of macroporous B2+L12 Ni-Al intermetallics used in cylindrical radiant burners
A. Maznoy et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Combustion characteristics of blast furnace gas in porous media burner
Jinqiao He et al.
APPLIED THERMAL ENGINEERING (2019)
Sustainable development of enhanced geothermal systems based on geotechnical research - A review
W. G. P. Kumari et al.
EARTH-SCIENCE REVIEWS (2019)
Comparative study of hydrogen addition effects on the natural-gas/diesel and natural-gas/dimethyl-ether reactivity controlled compression ignition mode of operation
A. Kakoee et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Flame stability and combustion characteristics of liquid fuel in a meso-scale burner with porous media
Xinjian Chen et al.
FUEL (2019)
A comprehensive experimental characterisation of a novel porous media combustion-based thermophotovoltaic system with controlled emission
Philippe Gentillon et al.
APPLIED ENERGY (2019)
Three-dimensional pore-scale numerical simulation of methane-air combustion in inert porous media under the conditions of upstream and downstream combustion wave propagation through the media
Igor Yakovlev et al.
COMBUSTION AND FLAME (2019)
Numerical investigation of a porous media combustor in a small-scale diesel engine
Subhasish Das et al.
ENERGY (2019)
Numerical comparative study of hydrogen addition on combustion and emission characteristics of a natural-gas/dimethyl-ether RCCI engine with pre-chamber
A. Kakoee et al.
ENERGY (2019)
Performance evaluation of diesel engines (PEDE) for a diesel-biodiesel fueled CI engine using nano-particles additive
Ayat Gharehghani et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Experimental investigation on premixed hydrogen/air combustion in varied size combustors inserted with porous medium for thermophotovoltaic system applications
Qingguo Peng et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Three dimensional numerical simulation of combustion and heat transfer in porous radiant burners
Shabani Nejad Hoda et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Magnetically responsive porous materials for efficient adsorption and desorption processes
Peng Tan et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2019)
Optimal scenario design of steam-assisted gravity drainage to enhance oil recovery with temperature and rate control
Danial Baghernezhad et al.
ENERGY (2019)
Flame front stability of low calorific fuel gas combustion with preheated air in a porous burner
Guanqing Wang et al.
ENERGY (2019)
Experimental study on the pre-evaporation pulse combustion of liquid fuel within a porous medium burner
Liu Hongsheng et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2019)
Thermal management in PEMFCs: The respective effects of porous media in the gas flow channel
Hossein Pourrahmani et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Impingement jet hydrogen, air and Cu-H2O nanofluid cooling of a hot surface covered by porous media with non-uniform input jet velocity
Aliakbar Izadi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Numerical performance analysis of a counter-flow double-pipe heat exchanger with using nanofluid and both sides partly filled with porous media
Majid Siavashi et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)
Performance Assessment of a Porous Radiant Cook Stove Fueled with Blend of Waste Vegetable Oil (WVO) and Kerosene
Lav Kumar Kaushik et al.
INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)
Combustion of biogas in Porous Radiant Burner: Low emission combustion
Sangjukta Devi et al.
INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)
Emission Characteristic in CI Engines Using Zirconium Porous Medium In Piston Head
F. Justin Dhiraviam et al.
RENEWABLE ENERGY SOURCES AND TECHNOLOGIES (2019)
Thermophotovoltaic power conversion using a superadiabatic radiant burner
H. Wu et al.
APPLIED ENERGY (2018)
Flame front inclination instability in the porous media combustion with inhomogeneous preheating temperature distribution
Lu Chen et al.
APPLIED THERMAL ENGINEERING (2018)
Life cycle Assessment (LCA) and Techno-economic Assessment (TEA) of medium scale (5-10 kW) LPG cooking stove with two-layer porous radiant burner
Lav Kumar Kaushik et al.
APPLIED THERMAL ENGINEERING (2018)
Development and testing of energy efficient and environment friendly porous radiant burner operating on liquefied petroleum gas
Niraj Kumar Mishra et al.
APPLIED THERMAL ENGINEERING (2018)
Optimization of heat transfer enhancement and pumping power of a heat exchanger tube using nanofluid with gradient and multi-layered porous foams
Majid Siavashi et al.
APPLIED THERMAL ENGINEERING (2018)
Micro combustion in a porous media for thermophotovoltaic power generation
Stephen Bani et al.
APPLIED THERMAL ENGINEERING (2018)
The effect of temperature dependent relative permeability on heavy oil recovery during hot water injection process using streamline-based simulation
Mohammad Hossein Doranehgard et al.
APPLIED THERMAL ENGINEERING (2018)
Propagation of Cellular Modes of Combustion of Porous Media under Nonadiabatic Conditions
P. M. Krishenik et al.
DOKLADY PHYSICAL CHEMISTRY (2018)
The combustion characteristics and performance evaluation of DME (dimethyl ether) as an alternative fuel in a two-section porous burner for domestic cooking application
Snehasish Panigrahy et al.
ENERGY (2018)
A study on the effects of porous structure on the environmental and radiative characteristics of cylindrical Ni-Al burners
Anatoly Maznoy et al.
ENERGY (2018)
Numerical investigation of key parameters of the porous media combustion based Micro-Thermophotovoltaic system
Stephen Bani et al.
ENERGY (2018)
An improvement of a lean burning condition of natural gas/diesel RCCI engine with a pre-chamber by using hydrogen
Alireza Kakoee et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Investigation on the effects of wall thickness and porous media on the thermal performance of a non-premixed hydrogen fueled cylindrical micro combustor
Qingguo Peng et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
The effect of different gas diffusion layer porosity on proton exchange membrane fuel cells
Anil Can Turkmen et al.
FUEL (2018)
Premixed combustion of low-concentration coal mine methane with water vapor addition in a two-section porous media burner
Huaming Dai et al.
FUEL (2018)
The role of flow-field layout on the conditioning of a proton exchange membrane fuel cell
Ibrahim Alaefour et al.
FUEL (2018)
Using nanofluids to control fines migration for oil recovery: Nanofluids co-injection or nanofluids pre-flush? -A comprehensive answer
Bin Yuan et al.
FUEL (2018)
Methane partial oxidation in a two-layer porous media burner with Al2O3 pellets of different diameters
Yuqing Wang et al.
FUEL (2018)
Syngas production frorn polyethylene and biogas in porous media combustion
Hans Gonzalez et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Experimental study on combustion instability and attenuation characteristics in the lab-scale gas turbine combustor with a sponge-like porous medium
Yeong Jae Kim et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
Simulation of combustion in a porous-medium diesel engine
Arash Mohammadi et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
Numerical study of the effect of thermal boundary conditions and porous medium properties on the combustion in a combined porous-free flame burner
Seyed Abdolmehdi Hashemi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2018)
Porous materials in building energy technologies-A review of the applications, modelling and experiments
Saman Rashidi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Stable flame limits for optimal radiant performance of porous media reactors for thermophotovoltaic applications using packed beds of alumina
Philippe Gentillon et al.
APPLIED ENERGY (2018)
Experimental study on pollutant emissions in the novel combined porous-free flame burner
Seyed Amin Ghorashi et al.
ENERGY (2018)
Future transportation fuels
Gautam Kalghatgi et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)
Flame stabilization in a planar microcombustor partially filled with anisotropic porous medium
Long Meng et al.
AICHE JOURNAL (2018)
Extending the lean operating range of a premixed charged compression ignition natural gas engine using a pre-chamber
Vahid Esfahanian et al.
ENERGY (2017)
Ultra-low calorific gas combustion in a gradually-varied porous burner with annular heat recirculation
Fuqiang Song et al.
ENERGY (2017)
Effects of the preheat layer thickness on surface/submerged flame during porous media combustion of micro burner
Ayub Ahmed Janvekar et al.
ENERGY (2017)
Investigating the reactivity controlled compression ignition (RCCI) combustion strategy in a natural gas/diesel fueled engine with a pre-chamber
Mohammad Mandi Salahi et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Experimental demonstration of a novel approach to increase power conversion potential of a hydrocarbon fuelled, portable, thermophotovoltaic system
Xin Kang et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Biogas-fueled flame fuel cell for micro-combined heat and power system
Hongyu Zeng et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Design and development of a novel self aspirating liquid fuel annular porous medium burner (SLAPMB)
Usa Makmool et al.
FUEL (2017)
A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel-biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part I - Experimental analysis
Esmail Khalife et al.
FUEL (2017)
Flame stability analysis of the premixed methane-air combustion in a two-layer porous media burner by numerical simulation
Seyed Mohammad Hashemi et al.
FUEL (2017)
A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel-biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part II - Exergetic analysis
Mortaza Aghbashlo et al.
FUEL (2017)
Syngas production from CO2/CH4 rich combustion in a porous media burner: Experimental characterization and elementary reaction model
Hongyu Zeng et al.
FUEL (2017)
Analytical model of well injectivity improvement using nanofluid preflush
Bin Yuan et al.
FUEL (2017)
Coal dust gasification in the filtration combustion mode with syngas production
E. A. Salgansky et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Hydrogen production from algae biomass in rich natural gas-air filtration combustion
Nicolas Ripoll et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effects of metal foam meshes on premixed methane-air flame propagation in the closed duct
Peng Chen et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2017)
Applications of magnetohydrodynamics in biological systems-a review on the numerical studies
Saman Rashidi et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)
THE EFFECT OF INLET CONDITION ON THE COMBUSTION IN A POROUS-FREE FLAME BURNER
Seyed Abdolmehdi Hashemi et al.
JOURNAL OF POROUS MEDIA (2017)
Numerical investigation of the flame stabilization in a divergent porous media burner
Seyed Mohammad Hashemi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2017)
A review on the applications of porous materials in solar energy systems
Saman Rashidi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Development of a high performance flexible porous burner (FPMB) with an adjustable cooling effect
S. Juntron et al.
THEORETICAL AND APPLIED MECHANICS LETTERS (2017)
Comparison of Combustion Behavior between Solid Porous Burners Installed the Porous Emitter and Non-Porous Emitter
Kitti Kaewchart et al.
2017 INTERNATIONAL CONFERENCE ON ALTERNATIVE ENERGY IN DEVELOPING COUNTRIES AND EMERGING ECONOMIES (2017)
FDF-based combustion instability analysis for evolution of mode shapes and eigenfrequency in the multiple flame burner
Seungtaek Oh et al.
APPLIED THERMAL ENGINEERING (2017)
Particle swarm optimization of thermal enhanced oil recovery from oilfields with temperature control
Majid Siavashi et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical investigation on the combustion characteristics of non-premixed hydrogen-air in a novel micro-combustor
E. Jiaqiang et al.
APPLIED THERMAL ENGINEERING (2017)
Effects of waste fish oil biodiesel on diesel engine combustion characteristics and emission
Ayatallah Gharehghani et al.
RENEWABLE ENERGY (2017)
Design and development of a porous heterogeneous combustor for efficient heat production by combustion of liquid and gaseous fuels
Anthony Carmine Terracciano et al.
APPLIED ENERGY (2016)
Effect of burner configuration and operating parameters on the performance of kerosene pressure stove with submerged porous medium combustion
Monikankana Sharma et al.
APPLIED THERMAL ENGINEERING (2016)
A numerical investigation on the effect of wall thermal conductivity on flame stability and combustion efficiency in a mesoscale channel filled with fibrous porous medium
Yi Liu et al.
APPLIED THERMAL ENGINEERING (2016)
Effect of self-entrainment and porous geometry on stability of premixed LPG porous burner
Ponepen Laphirattanakul et al.
APPLIED THERMAL ENGINEERING (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Fundamental flame characteristics of premixed H-2-air combustion in a planar porous micro-combustor
Jun Li et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Premixed combustion of methane-air mixture stabilized over porous medium: A 2D numerical study
Valerio Giovannoni et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Numerical study on heat recirculation in a porous micro-combustor
Jun Li et al.
COMBUSTION AND FLAME (2016)
Numerical and experimental analyses of LPG (liquefied petroleum gas) combustion in a domestic cooking stove with a porous radiant burner
Snehasish Panigrahy et al.
ENERGY (2016)
Usability of porous burner in kerosene pressure stove: An experimental investigation aided by energy and exergy analyses
Monikankana Sharma et al.
ENERGY (2016)
3-Dimensional numerical simulation of superadiabatic radiant porous burner with enhanced heat recirculation
Vahid Vandadi et al.
ENERGY (2016)
Experimental and numerical investigations on flame stability of methane/air mixtures in mesoscale combustors filled with fibrous porous media
Yi Liu et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Comparative assessment of a porous burner using vegetable cooking oil-kerosene fuel blends for thermoelectric and thermophotovoltaic power generation
K. F. Mustafa et al.
FUEL (2016)
Experimental study on standing wave regimes of premixed H2-air combustion in planar micro-combustors partially filled with porous medium
Jun Li et al.
FUEL (2016)
Analysis of combustion of liquefied petroleum gas in a porous radiant burner
Snehasish Panigrahy et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Temperature and radiative characteristics of cylindrical porous Ni-Al burners
Roman Fursenko et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Numerical simulation of the hybrid filtration combustion of biomass
Mario Toledo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Hydrocarbons conversion to syngas in inert porous media combustion
Mario Toledo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Modelling hydrogen production by the rich combustion of heavy fuel oil
J. Gomez et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Passive control of thermoacoustic instabilities in swirl-stabilized combustion at elevated pressures
L. Justin Williams et al.
INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS (2016)
Analysis of an Internal Combustion Engine Using Porous Foams for Thermal Energy Recovery
Mehdi Ali Ehyaei et al.
SUSTAINABILITY (2016)
Two zone modeling of combustion, performance and emission characteristics of a cylinder head porous medium engine with experimental validation
Kannan Chidambaram et al.
MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2016)
Hydrogen/oxygen premixed combustion characteristics in micro porous media combustor
J. F. Pan et al.
APPLIED ENERGY (2015)
Experimental study of heat transfer enhancement in a liquid piston compressor/expander using porous media inserts
Bo Yan et al.
APPLIED ENERGY (2015)
Combustion stability and thermal efficiency in a porous media burner for LPG cooking in the food industry using Al2O3 particles coming from grinding wastes
Bernardo Herrera et al.
APPLIED THERMAL ENGINEERING (2015)
Performance characterization of a medium-scale liquefied petroleum gas cooking stove with a two-layer porous radiant burner
N. K. Mishra et al.
APPLIED THERMAL ENGINEERING (2015)
STUDY ON A LOWER HEAT LOSS MICRO GAS TURBINE COMBUSTOR WITH POROUS INLET
Liqiao Jiang et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2015)
NUMERICAL SIMULATION OF HEAVY CRUDE OIL COMBUSTION IN POROUS COMBUSTION TUBE
D. Srinivasa Reddy et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2015)
Numerical study of turbulent porous media combustion coupled with thermoelectric generation in a recuperative reactor
P. Donoso-Garcia et al.
ENERGY (2015)
An experimental study on reactivity controlled compression ignition engine fueled with biodiesel/natural gas
Ayatallah Gharehghani et al.
ENERGY (2015)
Heat transfer enhancement and pressure drop penalty in porous solar heat exchangers: A sensitivity analysis
S. Rashidi et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Experimental analysis of a porous burner operating on kerosene-vegetable cooking oil blends for thermophotovoltaic power generation
K. F. Mustafa et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
A comparative study on the first and second law analysis and performance characteristics of a spark ignition engine using either natural gas or gasoline
A. Gharehghani et al.
FUEL (2015)
Dynamic behaviors of premixed hydrogen-air flames in a planar micro-combustor filled with porous medium
Jun Li et al.
FUEL (2015)
Numerical investigation of filtration gas combustion in a mesoscale combustor filled with inert fibrous porous medium
Yi Liu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
A computational study of operating range extension in a natural gas SI engine with the use of hydrogen
A. Gharehghani et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Syngas production from coal in presence of steam using filtration combustion
T. Mario Toledo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
A review of acoustic dampers applied to combustion chambers in aerospace industry
Dan Zhao et al.
PROGRESS IN AEROSPACE SCIENCES (2015)
Adsorption working pairs for adsorption cooling chillers: A review based on adsorption capacity and environmental impact
Ahmed N. Shmroukh et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Experimental investigation of the performance of a liquid fuel-fired porous burner operating on kerosene-vegetable cooking oil (VCO) blends for micro-cogeneration of thermoelectric power
K. F. Mustafa et al.
RENEWABLE ENERGY (2015)
Numerical study of heat transfer and combustion in IC engine with a porous media piston region
Lei Zhou et al.
APPLIED THERMAL ENGINEERING (2014)
A universal model of opposed flow combustion of solid fuel over an inert porous medium
Nepal C. Roy et al.
COMBUSTION AND FLAME (2014)
SURFACE BURNING ON A FOAM METAL MATRIX WITH THE CERAMIC COATING
Vladimir M. Shmelev
COMBUSTION SCIENCE AND TECHNOLOGY (2014)
Perovskite catalysts enhanced combustion on porous media
Manuel D. Robayo et al.
ENERGY (2014)
Experimental study on temperature variation in a porous inert media burner for premixed methane air combustion
Hongmin Wang et al.
ENERGY (2014)
Experimental study of porous metal burners for domestic stove applications
Chih-Yung Wu et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Experimental study of n-heptane/air combustion in meso-scale burners with porous media
Junwei Li et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)
Combustion of methane/air mixtures in a two-layer porous burner: A comparison of alumina foams, beads, and honeycombs
Huaibin Gao et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)
Methane/air premixed combustion in a two-layer porous burner with different foam materials
H. B. Gao et al.
FUEL (2014)
Hydrogen addition effects on high intensity distributed combustion
Ahmed E. E. Khalil et al.
APPLIED ENERGY (2013)
Combustion characteristics and thermal efficiency for premixed porous-media types of burners
Byeonghun Yu et al.
ENERGY (2013)
Energy and exergy analyses of porous baffles inserted solar air heaters for building applications
Fatih Bayrak et al.
ENERGY AND BUILDINGS (2013)
Effect of oxygen enriched air on porous radiant burner performance and NO emissions
M. M. Abdelaal et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)
Development of novel porous radiant burners for LPG cooking applications
P. Muthukumar et al.
FUEL (2013)
CFD testing of the pointwise use of the Zehner-Schlunder formulas for fixed-bed stagnant thermal conductivity
Anthony G. Dixon et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)
Hydrogen and syngas production from propane and polyethylene
Philippe Gentillon et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Active Combustion Control for a Low-Emissions Aircraft Engine Combustor Prototype: Experimental Results
John C. DeLaat et al.
JOURNAL OF PROPULSION AND POWER (2013)
Investigation on the thermal flame thickness for lean premixed combustion of low calorific H-2/CO mixtures within porous inert media
S. Voss et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
INVESTIGATION OF THE EFFECT OF ADDITIVES TO NATURAL GAS ON HEAVY-DUTY SI ENGINE COMBUSTION CHARACTERISTICS
A. Gharehghani et al.
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (2013)
Experimental study of combustion in a double-layer burner packed with alumina pellets of different diameters
Huai-Bin Gao et al.
APPLIED ENERGY (2012)
Large Eddy Simulation of combustion instabilities in a lean partially premixed swirled flame
Benedetta Franzelli et al.
COMBUSTION AND FLAME (2012)
Porous burners for low emission combustion: An experimental investigation
Christos Keramiotis et al.
ENERGY (2012)
Experimental investigation on low velocity filtration combustion in porous packed bed using gaseous and liquid fuels
Dan Wu et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2012)
Porous Burner for Application in Stationary Gas Turbines: An Experimental Investigation of the Flame Stability, Emissions and Temperature Boundary Condition
Neda Djordjevic et al.
FLOW TURBULENCE AND COMBUSTION (2012)
Review of the effects of biodiesel on NOx emissions
S. Kent Hoekman et al.
FUEL PROCESSING TECHNOLOGY (2012)
Fundamental Experiment and Numerical Analysis of a Modular Microcombustor with Silicon Carbide Porous Medium
K. J. Chua et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
THE INTERACTION BETWEEN DIESEL SPRAYS AND POROUS MEDIA: EFFECT OF MEDIUM PORE DENSITY AND INJECTION PRESSURE
Navid Shahangian et al.
JOURNAL OF POROUS MEDIA (2012)
Large Eddy Simulations of gaseous flames in gas turbine combustion chambers
L. Y. M. Gicquel et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)
Stability of lean combustion in mini-scale porous media combustor with heat recuperation
Kan Xu et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2011)
Research on modular micro combustor-radiator with and without porous media
W. M. Yang et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Analysis of in situ combustion of oil with pyrolysis and vaporization
A. A. Mailybaev et al.
COMBUSTION AND FLAME (2011)
Development of energy efficient porous medium burners on surface and submerged combustion modes
M. Abdul Mujeebu et al.
ENERGY (2011)
Studies on porous radiant burners for LPG (liquefied petroleum gas) cooking applications
V. K. Pantangi et al.
ENERGY (2011)
Experimental Investigation of Kerosene Spray Flames in Inert Porous Media near Lean Extinction
Chendhil Periasamy et al.
ENERGY & FUELS (2011)
Ultra-low-emission steam boiler constituted of reciprocal flow porous burner
William M. Barcellos et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2011)
Adiabatic premixed combustion in a gaseous fuel porous inert media under high pressure and temperature: Novel flame stabilization technique
Ayman Bakry et al.
FUEL (2011)
Syngas production in hybrid filtration combustion
Mario Toledo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Modeling Transport in Porous Media With Phase Change: Applications to Food Processing
Amit Halder et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2011)
Porous media combustion for micro thermophotovoltaic system applications
S. K. Chou et al.
APPLIED ENERGY (2010)
Flame stabilization between two beds of alumina balls in a porous burner
Valeri Bubnovich et al.
APPLIED THERMAL ENGINEERING (2010)
Filtration combustion characteristics of low calorific gas in SiC foams
Cheng-Hang Zheng et al.
FUEL (2010)
Parametric investigations of premixed methane-air combustion in two-section porous media by numerical simulation
Hui Liu et al.
FUEL (2010)
Experimental investigation of porous media combustion in a planar micro-combustor
J. Li et al.
FUEL (2010)
Trends in modeling of porous media combustion
M. Abdul Mujeebu et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2010)
ANALYSIS OF INTERNAL COMBUSTION ENGINE WITH A NEW CONCEPT OF POROUS MEDIUM COMBUSTION FOR THE FUTURE CLEAN ENGINE
Ashok A. Dhale et al.
THERMAL SCIENCE (2010)
Lean flammability limits for stable performance with a porous burner
M. H. Akbari et al.
APPLIED ENERGY (2009)
Applications of porous media combustion technology - A review
M. Abdul Mujeebu et al.
APPLIED ENERGY (2009)
Simulation of a porous medium (PM) engine using a two-zone combustion model
Hongsheng Liu et al.
APPLIED THERMAL ENGINEERING (2009)
Characterization of wall temperature and radiation power through cylindrical dump micro-combustors
J. Li et al.
COMBUSTION AND FLAME (2009)
Thermodynamic analysis of the heat regenerative cycle in porous medium engine
Hongsheng Liu et al.
ENERGY CONVERSION AND MANAGEMENT (2009)
Numerical study on the realization of compression ignition in a type of porous medium engine fueled with Isooctane
Zhiguo Zhao et al.
FUEL (2009)
Experimental and numerical investigation on performance of a porous medium burner with reciprocating flow
Mao-Zhao Xie et al.
FUEL (2009)
Hydrogen production in ultrarich combustion of hydrocarbon fuels in porous media
Mario Toledo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Experimental characterization of gaseous species emitted by the fast pyrolysis of biomass and polyethylene
S. K. Ouiminga et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Combustion in porous media and its applications - A comprehensive survey
M. Abdul Mujeebu et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2009)
A novel meso-scale combustion system for operation with liquid fuels
Vijaykant Sadasivuni et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
A review of investigations on liquid fuel combustion in porous inert media
M. Abdul Mujeebu et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2009)
Filtration combustion of a carbon-inert material system in the regime with superadiabatic heating
E. A. Salgansky et al.
COMBUSTION EXPLOSION AND SHOCK WAVES (2008)
Combustion in a meso-scale liquid-fuel-film combustor with central-porous fuel inlet
Yueh-Heng Li et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2008)
Progress in miniature liquid film combustors:: Double chamber and central porous fuel inlet designs
Yueh-Heng Li et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2008)
On predicting two-dimensional heat transfer in a cylindrical porous media combustor
Nelson O. Moraga et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)
Porous burners for lean-burn applications
Susie Wood et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2008)
Numerical study on the compression ignition of a porous medium engine
Zhao ZhiGuo et al.
SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES (2008)
Techno-economic assessment of hydrogen production processes for the hydrogen economy for the short and medium term
F. Mueller-Langer et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Liquid fuel combustion within silicon-carbide coated carbon foam
S. Vijaykant et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2007)
An improved, easily implementable, porous media based model for deep-fat frying - Part I: Model development and input parameters
A. Halder et al.
FOOD AND BIOPRODUCTS PROCESSING (2007)
Combustion of suspended fine solid fuel in air inside inert porous medium: A heat transfer analysis
Tarun K. Kayal et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Porous media approaches to studying simultaneous heat and mass transfer in food processes. I: Problem formulations
A. K. Datta
JOURNAL OF FOOD ENGINEERING (2007)
Numerical study of the effect of the diameter of alumina balls on flame stabilization in a porous-medium burner
V. Bubnovich et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2007)
Liquid fuels-fired porous burner
S. Jugjai et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2007)
Combustion in porous media
M. M. Kamal et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2006)
Filtration combustion of hydrogen-air, propane-air, and methane-air mixtures in inert porous media
N. A. Kakutkina et al.
COMBUSTION EXPLOSION AND SHOCK WAVES (2006)
Analytical study of the combustion waves propagation under filtration of methane-air mixture in a packed bed
V. I. Bubnovich et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Heat transfer analysis of a two-dimensional rectangular porous radiant burner
SC Mishra et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2006)
Numerical and experimental study of the conversion of methane to hydrogen in a porous media reactor
RS Dhamrat et al.
COMBUSTION AND FLAME (2006)
Subadiabatic and superadiabatic performance of a two-section porous burner
BJ Vogel et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2005)
Combustion characteristics of ethanol in a porous ceramic burner and ignition improved by enhancement of liquid-fuel intrusion in the pore with ultrasonic irradiation
T Fuse et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2005)
Computational and experimental study of a two-section porous burner
MT Smucker et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2004)
Numerical study of the effects of material properties on flame stabilization in a porous burner
AJ Barra et al.
COMBUSTION AND FLAME (2003)
Dynamics of filtration combustion front perturbation in the tubular porous media burner
KV Dobrego et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)
Combustion characteristics in oil-vaporizing sustained by radiant heat reflux enhanced with higher porous ceramics
T Fuse et al.
FUEL (2003)
Flame stabilization, operating range, and emissions for a methane/air porous burner
WM Mathis et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2003)
Effects of hydrogen addition on methane combustion in a porous medium burner
CJ Tseng
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2002)
The combustion of liquid fuels using a porous medium
S Jugjai et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2002)
Evaporation-combustion affected by in-cylinder, reciprocating porous regenerator
CW Park et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2002)
Micropower generation using combustion: Issues and approaches
AC Fernandez-Pello
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2002)
Experimental and analytical investigation of the gas filtration combustion inclination instability
KV Dobrego et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)
A new type of internal combustion engine based on the porous-medium combustion technique
F Durst et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2001)
Numerical and experimental investigation of matrix-stabilized methane/air combustion in porous inert media
G Brenner et al.
COMBUSTION AND FLAME (2000)
Determination of pore size and pore size distribution on the surface of hollow-fiber filtration membranes: a review of methods
CS Zhao et al.
DESALINATION (2000)
Chemical structures of methane-air filtration combustion waves for fuel-lean and fuel-rich conditions
LA Kennedy et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2000)