Related references
Note: Only part of the references are listed.A review of controlling strategies of the ignition timing and combustion phase in homogeneous charge compression ignition (HCCI) engine
Xiongbo Duan et al.
FUEL (2021)
An experimental study in HCCI combustion of LPG in diesel engine
S. Kannan et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Comparisons of advanced combustion technologies (HCCI, PCCI, and dual-fuel PCCI) on engine performance and emission characteristics in a heavy-duty diesel engine
Euijoon Shim et al.
FUEL (2020)
Impact of spray-wall interaction on the in-cylinder spatial unburned hydrocarbon distribution of a gasoline partially premixed combustion engine
Vallinayagam Raman et al.
COMBUSTION AND FLAME (2020)
Effects of injection pressure on the NOx and PM emission control of diesel engine: A review under the aspect of PCCI combustion condition
Dao Nam Cao et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Study of spray/wall interaction in transition zones from HCCI via PPC to CI combustion modes
Hao Shi et al.
FUEL (2020)
Critical review on the characteristics of performance, combustion and emissions of PCCI engine controlled by early injection strategy based on narrow-angle direct injection (NADI)
Anh Tuan Hoang
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Effect of piston bowl geometry and compression ratio on in-cylinder combustion and engine performance in a gasoline direct-injection compression ignition engine under different injection conditions
Leilei Xu et al.
APPLIED ENERGY (2020)
Dual fuel intelligent charge compression ignition (ICCI) combustion: Efficient and clean combustion technology for compression ignition engines
Zilong Li et al.
FUEL (2020)
Combustion stability study of partially premixed combustion with low-octane fuel at low engine load conditions
Yanzhao An et al.
APPLIED ENERGY (2019)
Effects of low-temperature reforming products of PRF50 on combustion and emission characteristics in an HCCI engine
Yang Wang et al.
APPLIED THERMAL ENGINEERING (2019)
An Experimental Investigation on Low Load Combustion Stability and Cold-Firing Capacity of a Gasoline Compression Ignition Engine
Lei Zhou et al.
ENGINEERING (2019)
Effect of EGR routing on efficiency and emissions of a PPC engine
Nikolaos Dimitrakopoulos et al.
APPLIED THERMAL ENGINEERING (2019)
Parametric study on combustion characteristics of virtual. HCCI engine fueled with methane-hydrogen blends under low load conditions
Wonjun Yoon et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
A Review of Early Injection Strategy in Premixed Combustion Engines
Xingyu Liang et al.
APPLIED SCIENCES-BASEL (2019)
Experimental study on spray and combustion of gasoline/hydrogenated catalytic biodiesel blends in a constant volume combustion chamber aimed for GCI engines
Wenjun Zhong et al.
FUEL (2019)
Experimental study on the partially premixed combustion (PPC) fueled with n-butanol
Zunqing Zheng et al.
FUEL (2019)
Influence of fuel properties on multi-cylinder PPC operation over a wide range of EGR and operating conditions
Bin Mao et al.
FUEL (2018)
Naphtha vs. dieseline - The effect of fuel properties on combustion homogeneity in transition from CI combustion towards HCCI
R. Vallinayagam et al.
FUEL (2018)
Compression ratio influence on combustion and emissions characteristic of hydrogen diesel dual fuel CI engine: Numerical Study
Priybrat Sharma et al.
FUEL (2018)
Comparison of late PCCI combustion, performance and emissions of diesel engine for B20 and B100 fuels by KIVA-CHEMKIN coupling
Alborz Zehni et al.
RENEWABLE ENERGY (2018)
Study on optimal combustion strategy to improve combustion performance in a single-cylinder PCCI diesel engine with different combustion chamber geometry
Seung Hyun Yoon et al.
APPLIED THERMAL ENGINEERING (2018)
Combustion and emission characteristics of E85 and diesel blend in conventional diesel engine operating in PPCI mode
Miqdam T. Chaichan
THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)
Computational Investigation of the Double-Injection Strategy on Ethanol Partially Premixed Compression Ignition
Ragavendra P. Panakarajupally et al.
ENERGY & FUELS (2017)
Evolution, challenges and path forward for low temperature combustion engines
Avinash Kumar Agarwal et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)
Effect of bioethanol on combustion and emissions in advanced CI engines: HCCI, PPC and GCI mode - A review
Hyun Kwon Noh et al.
APPLIED ENERGY (2017)
Effects of Injection Timing on Fluid Flow Characteristics of Partially Premixed Combustion Based on High-Speed Particle Image Velocimetry
Mohammad Izadi Najafabadi et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2017)
Autoignition characteristics of oxygenated gasolines
Changyoul Lee et al.
COMBUSTION AND FLAME (2017)
Effect of fuel injection parameters on combustion stability and emissions of a mineral diesel fueled partially premixed charge compression ignition (PCCI) engine
Ayush Jain et al.
APPLIED ENERGY (2017)
Optical study of spray-wall impingement impact on early-injection gasoline partially premixed combustion at low engine load
Qinglong Tang et al.
APPLIED ENERGY (2017)
Combustion and performance characteristics of an HCCI engine utilizing trapped residual gas via reduced valve lift
Can Cinar et al.
APPLIED THERMAL ENGINEERING (2016)
Effects of late intake valve closing (LIVC) and rebreathing valve strategies on diesel engine performance and emissions at low loads
Xiangyu Zhang et al.
APPLIED THERMAL ENGINEERING (2016)
Partially premixed combustion based on different injection strategies in a light-duty diesel engine
Liang Qiu et al.
ENERGY (2016)
Influence of fuel injection pressures on Calophyllum inophyllum methyl ester fuelled direct injection diesel engine
K. Nanthagopal et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Partially premixed low temperature combustion using dimethyl carbonate (DMC) in a DI diesel engine for favorable smoke/NOx emissions
B. Rajesh Kumar et al.
FUEL (2016)
Experimental investigation on the effect of charge temperature on ethanol fueled HCCI combustion engine
Harisankar Bendu et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Numerical investigation of a dual-loop EGR split strategy using a split index and multi-objective Pareto optimization
Jungsoo Park et al.
APPLIED ENERGY (2015)
Experimental investigation of the effect of compression ratio, injection timing & pressure in a DI (direct injection) diesel engine running on carbon black-water-diesel emulsion
Arun Kumar Wamankar et al.
ENERGY (2015)
Effect of two-stage injection on combustion and emissions under high EGR rate on a diesel engine by fueling blends of diesel/gasoline, diesel/n-butanol, diesel/gasoline/n-butanol and pure diesel
Zunqing Zheng et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Effects of exhaust gas recirculation in diesel engines featuring late PCCI type combustion strategies
S. d'Ambrosio et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Effects of intake air temperature on combustion, performance and emission characteristics of a HCCI engine fueled with the blends of 20% n-heptane and 80% isooctane fuels
Can Cinar et al.
FUEL PROCESSING TECHNOLOGY (2015)
Direct Dual Fuel Stratification, a Path to Combine the Benefits of RCCI and PPC
Martin Wissink et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2015)
Experimental study on the effects of high/low pressure EGR proportion in a passenger car diesel engine
Youngsoo Park et al.
APPLIED ENERGY (2014)
Bioethanol and gasoline premixing effect on combustion and emission characteristics in biodiesel dual-fuel combustion engine
Su Han Park et al.
APPLIED ENERGY (2014)
Optimal operating conditions for wet ethanol in a HCCI engine using exhaust gas heat recovery
Samveg Saxena et al.
APPLIED ENERGY (2014)
Experimental investigations of performance, combustion and emission characteristics of ethanol and methanol fueled HCCI engine
Rakesh Kumar Maurya et al.
FUEL PROCESSING TECHNOLOGY (2014)
Sensitivity of combustion noise and NOx and soot emissions to pilot injection in PCCI Diesel engines
A. J. Torregrosa et al.
APPLIED ENERGY (2013)
An investigation of partially premixed compression ignition combustion using gasoline and spark assistance
Jesus Benajes et al.
APPLIED THERMAL ENGINEERING (2013)
Spray and combustion characteristics of gasoline and diesel in a direct injection compression ignition engine
Kihyun Kim et al.
FUEL (2013)
Comparison of Negative Valve Overlap (NVO) and Rebreathing Valve Strategies on a Gasoline PPC Engine at Low Load and Idle Operating Conditions
Patrick Borgqvist et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2013)
Sensitivity Analysis Study on Ethanol Partially Premixed Combustion
Mehrzad Kaiadi et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2013)
Combustion characteristics of diesel HCCI engine: An experimental investigation using external mixture formation technique
Akhilendra Pratap Singh et al.
APPLIED ENERGY (2012)
Effects of spray impingement, injection parameters, and EGR on the combustion and emission characteristics of a PCCI diesel engine
Robert Kiplimo et al.
APPLIED THERMAL ENGINEERING (2012)
Effect of early injection strategy on spray atomization and emission reduction characteristics in bioethanol blended diesel fueled engine
Su Han Park et al.
ENERGY (2012)
Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel-diesel blend using response surface methodology
M. Pandian et al.
APPLIED ENERGY (2011)
Effect of Exhaust Gas Recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine
Deepak Agarwal et al.
APPLIED ENERGY (2011)
Effect of Two-Stage Fuel Injection Parameters on NOx Reduction Characteristics in a DI Diesel Engine
Kyusoo Jeong et al.
ENERGIES (2011)
Calculation of mass emissions, oxygen mass fraction and thermal capacity of the inducted charge in SI and diesel engines from exhaust and intake gas analysis
Stefano d'Ambrosio et al.
FUEL (2011)
Gasoline partially premixed combustion, the future of internal combustion engines?
V. Manente et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2011)
Effects of Compression Ratio and Simulated EGR on Combustion Characteristics and Exhaust Emissions of a Diesel PCCI Engine
Robert Kiplimo et al.
JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY (2011)
An investigation of the effects of spray angle and injection strategy on dimethyl ether (DME) combustion and exhaust emission characteristics in a common-rail diesel engine
Seung Hyun Yoon et al.
FUEL PROCESSING TECHNOLOGY (2010)
Characterization of Partially Premixed Combustion With Ethanol: EGR Sweeps, Low and Maximum Loads
Vittorio Manente et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2010)
Modeling HCCI combustion: Modification of a multi-zone model and comparison to experimental results at varying boost pressure
N. P. Komninos
APPLIED ENERGY (2009)
Experimental study of various effects of exhaust gas recirculation (EGR) on combustion and emissions of an automotive direct injection diesel engine
Alain Maiboom et al.
ENERGY (2008)
Using exhaust gas recirculation in internal combustion engines: a review
GH Abd-Alla
ENERGY CONVERSION AND MANAGEMENT (2002)
Evaluation of exhaust gas recirculation as a technique for reducing diesel engine NOx emissions
M Lapuerta et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2000)
Share Paper
