☆ 4.5 Article

Comparison of fatigue performance of TC4 titanium alloy welded by electron beam welding and laser welding with filler wire

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Analysis of heterogeneity of fatigue properties of double-sided electron beam welded 140-mm thick TC4 titanium alloy joints

Jian Long et al.

Summary: This research delved into the fatigue properties of double-sided electron beam welded joints, revealing that the materials in the overlap region of the two weld seams exhibited significantly inferior low-cycle fatigue properties due to more second-phase precipitates. The mechanical properties near the overlap region in the joint showed significant heterogeneity, contributing to the overall weakening of mechanical properties.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Industrial

Microstructural characteristics and computational investigation on electron beam welded Ti-6Al-4 V alloy

Yu Lu et al.

Summary: A framework for simulating the microstructural evolution during electron beam welding of Ti-6Al-4V alloy with different initial parent microstructures was presented, highlighting the impact of thermal processing on the emerging microstructure features. Microstructure characterisation using microscopy techniques provided insight into the physically-based parameters necessary for predicting microstructures in EBW processes.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Fatigue life evaluation of Ti-6Al-4V welded joints manufactured by electron beam melting

Yanan Hu et al.

Summary: Electron beam melting (EBM) technology shows promise in 3D printing complex components, but faces challenges in manufacturing large-scale parts due to limitations of enclosed vacuum chambers. This study measured fatigue crack growth rate and high-cycle fatigue performance of EBM-processed titanium alloy and welded joints, proposing an X-parameter model to evaluate fatigue life. The research framework and results are expected to provide a reference for assessing fatigue life of welded parts made through additive manufacturing.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Zoning study on the fatigue crack propagation behaviors of a double-sided electron beam welded joint of TC4 titanium alloy with the thickness of 140 mm

Jian Long et al.

Summary: This study analyzed fatigue crack propagation rates, observed metallographic microstructures, and studied precipitates in different zones of a double-sided EBW joint of Ti alloy. The results showed that weld metal in the second layer had poor resistance to fatigue crack propagation, and needle-shaped martensites were found in the heat affected zones of each layer.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Extension of the process limits in laser beam welding of thick-walled components using the Laser Multi-Pass Narrow-Gap welding (Laser-MPNG) on the example of the nickel-based material Alloy 617 occ

Benjamin Kessler et al.

Summary: This paper introduces a new laser beam welding process, Laser Multi-Pass Narrow-Gap welding, which successfully achieved welds without cracks or bonding defects in a thickness of 140 mm nickel-based material Alloy 617. The promising results of creep and low-cycle fatigue tests demonstrate the potential for future industrial applications of Laser-MPNG welded joints.

WELDING IN THE WORLD (2021)

Add to Collection

Article Engineering, Manufacturing

Effects of post-weld heat treatment on microstructures and properties of laser welded joints of new high-strength Ti-55531 alloys

Jian Long et al.

Summary: The study found that post-weld heat treatment can significantly improve the strength and microstructures of a laser welded joint of high-strength and high-toughness titanium alloy. After PWHT, both the tensile strength and microhardness of the joint increased.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Engineering, Mechanical

Fatigue strength distribution and probabilistic evaluation on stainless steel welded components under mixed mode loading

Gyoko Oh

Summary: Through fatigue tests and data evaluation, fatigue strengths, limits, lives, and failure probabilities under different loading conditions can be predicted. The notch factors, fatigue strengths, and scatters of welded components mainly depend on the weld flank angle and material factors.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A novel strategy for developing α plus β dual-phase titanium alloys with low Young's modulus and high yield strength

Yu Fu et al.

Summary: A novel strategy for developing alpha + beta dual-phase titanium alloys with low Young's modulus and high yield strength was proposed in this study, and an alloy was successfully developed through theoretical composition design and microstructure manipulation. The experimental results confirm that the developed alloy exhibits both low Young's modulus and high yield strength, indicating the potential for advanced biomedical titanium alloys with superior properties.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Microstructural characteristics and low cycle fatigue properties at 230 °C of different weld zone materials from a 100 mm thick dissimilar weld of ultra-supercritical rotor steel

Jian Long et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Mechanical

Experimental and computational analyses on fatigue fracture and microstructure in dissimilar metal weldments with circular sharp stress raiser

Gyoko Oh et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Manufacturing

Effects of minor Zr addition on the microstructure and mechanical properties of laser welded joint of Al/SiCp metal-matrix composite

Jian Long et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Engineering, Manufacturing

Effect of ultrasonic vibration of molten pool on microstructure and mechanical properties of Ti-6Al-4V joints prepared via CMT plus P welding

Guancheng Zhao et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Automation & Control Systems

Microstructure and stress distribution of TC4 titanium alloy joint using laser-multi-pass-narrow-gap welding

Jinzhao Liu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Mechanics

On unified crack propagation laws

A. Papangelo et al.

ENGINEERING FRACTURE MECHANICS (2019)

Add to Collection

Article Engineering, Mechanical

Fatigue life prediction for butt-welded joints considering weld-induced residual stresses and initial damage, relaxation of residual stress, and elasto-plastic fatigue damage

Xiaojia Wang et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)

Add to Collection

Article Engineering, Industrial

Microstructure and mechanical properties of ultra-narrow gap laser weld joint of 100 mm-thick SUS304 steel plates

Wuxiong Yang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Civil

Residual and assembling stress analyses on fillet welded joints of flange pipes and the fatigue strength prediction

Gyoko Oh et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal Decomposition of Massive Phase to Fine Lamellar α/β in Ti-6Al-4V Additively Manufactured Alloy by Directed Energy Deposition

Ghozali Suprobo et al.

METALS AND MATERIALS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Physical

Effects of niobium addition on the microstructure and mechanical properties of laser-welded joints of NiTiNb and Ti6Al4V alloys

Xingwen Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Engineering, Manufacturing

Characteristics of fiber laser weldments of two phases (alpha plus beta) titanium alloy

Chandan Kumar et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

Add to Collection

Article Automation & Control Systems

Process-parameter interactions in ultra-narrow gap laser welding of high strength steels

Wei Guo et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of stress concentration on plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass under compressive loading

S. Scudino et al.

MATERIALS LETTERS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical properties of Ti6.5Al2Zr1Mo1V titanium alloy with EBW under different temperatures

Peng-fei Fu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Mechanics

Effect of edge distance ratio on residual stresses induced by cold expansion and fatigue life of TC4 plates

Jun Liu et al.

ENGINEERING FRACTURE MECHANICS (2013)

Add to Collection

Article Engineering, Mechanical

Considerations in fatigue lifing of stress concentrations in textured titanium 6-4

M. T. Whittaker

INTERNATIONAL JOURNAL OF FATIGUE (2011)

Add to Collection

Article Engineering, Mechanical

New method for evaluation of the Manson-Coffin-Basquin and Ramberg-Osgood equations with respect to compatibility

Adam Nieslony et al.

INTERNATIONAL JOURNAL OF FATIGUE (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.