Related references
Note: Only part of the references are listed.Experimental study on the spray characteristics of octanol diesel and prediction of spray tip penetration by ANN model
Junjian Tian et al.
ENERGY (2022)
Diesel spray and combustion of multi-hole injectors with micro-hole under ultra-high injection pressure - Non-evaporating spray characteristics
Chang Zhai et al.
FUEL (2021)
Experimental study on spray characteristics of octanol biodiesel and modification of spray tip penetration model
Junjian Tian et al.
PHYSICS OF FLUIDS (2021)
Property Data Estimation for Hemiformals, Methylene Glycols and Polyoxymethylene Dimethyl Ethers and Process Optimization in Formaldehyde Synthesis
Steffen Schemme et al.
ENERGIES (2020)
Optical study on spray combustion characteristics of PODE/diesel blends in different ambient conditions
Yue Ma et al.
FUEL (2020)
A comprehensive parametric, energy and exergy analysis for oxygenated biofuels based dual-fuel combustion in an automotive light duty diesel engine
Murugan Rangasamy et al.
FUEL (2020)
Investigation on 1-heptanol as an oxygenated additive with diesel fuel for compression-ignition engine applications: An approach in terms of energy, exergy, exergoeconomic, enviroeconomic, and sustainability analyses
Battal Dogan et al.
FUEL (2020)
Ionic Liquid Encapsulated in MIL-100(Fe): A Green Catalyst for Synthesis of Polyoxymethylene Dimethyl Ethers from Methanol and Trioxane
Chaofeng Zhang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Glycerol to renewable fuel oxygenates. Part II: Gasoline-blending characteristics of glycerol and glycol derivatives with C3-C4 alkyl(idene) substituents
V. O. Samoilov et al.
FUEL (2020)
Experimental and Numerical Study on Autoignition Characteristics of the Polyoxymethylene Dimethyl Ether/Diesel Blends
Xin Meng et al.
ENERGY & FUELS (2019)
Spray characteristics of gasoline/PODE and diesel/PODE blends in a constant volume chamber
Jialin Liu et al.
APPLIED THERMAL ENGINEERING (2019)
Effects of polyoxymethylene dimethyl ethers on the solubility of ethanol/diesel and hydrous ethanol/diesel fuel blends
Chao Jin et al.
ENERGY SCIENCE & ENGINEERING (2019)
Experimental and Numerical Study on Autoignition Characteristics of the Gasoline/Diesel/Ethanol and Gasoline/Diesel/PODE/Ethanol Fuels
Bowen Li et al.
ENERGY & FUELS (2019)
Influence of n-butanol-diesel-PODE3-4 fuels coupled pilot injection strategy on combustion and emission characteristics of diesel engine
Haozhong Huang et al.
FUEL (2019)
Effect of diesel/PODE/ethanol blends on combustion and emissions of a heavy duty diesel engine
Haifeng Liu et al.
FUEL (2019)
Experimental Investigation of Effects of Di-N-Butyl Ether Addition on Spray Macroscopic Characteristics of Diesel-Biodiesel Blends
Yanju Liu et al.
JOURNAL OF ENERGY ENGINEERING (2019)
Enhancement in the performance of a diesel engine fuelled with Pongamia methyl ester and n-butanol as oxygenated additive
Iftikhar Ahmed Khan et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2019)
Spray characteristics and atomization behavior of bio-diesel (Norouzak) and diesel fuel blends
A. R. Ghahremani et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2018)
Modeling of macroscopic mineral diesel and biodiesel spray characteristics
Breda Kegl et al.
FUEL (2018)
Improvement of combustion performance and emissions in diesel engines by fueling n-butanol/diesel/PODE3-4 mixtures
Haozhong Huang et al.
APPLIED ENERGY (2018)
Improvement of emission characteristics and maximum pressure rise rate of diesel engines fueled with n-butanol/PODE3-4/diesel blends at high injection pressure
Haozhong Huang et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Experimental investigation of spray characteristics of a modified bio-diesel in a direct injection combustion chamber
A. R. Ghahremani et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)
Investigation on partially premixed combustion fueled with gasoline and PODE blends in a multi-cylinder heavy-duty diesel engine
Jialin Liu et al.
FUEL (2017)
Speciation and the laminar burning velocities of poly(oxymethylene) dimethyl ether 3 (POMDME3) flames: An experimental and modeling study
Wenyu Sun et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2017)
Study on combustion and emission characteristics of Polyoxymethylene Dimethyl Ethers/diesel blends in light-duty and heavy-duty diesel engines
Haoye Liu et al.
APPLIED ENERGY (2017)
Combustion and emission characteristics of diesel engine fueled with biodiesel/PODE blends
Bowen Li et al.
APPLIED ENERGY (2017)
Macroscopic spray characteristics of next-generation bio-derived diesel fuels in comparison to mineral diesel
Thomas Bohl et al.
APPLIED ENERGY (2017)
Improvement of emission characteristics and thermal efficiency in diesel engines by fueling gasoline/diesel/PODEn blends
Haoye Liu et al.
ENERGY (2016)
Homogeneous charge compression ignition (HCCI) combustion of polyoxymethylene dimethyl ethers (PODE)
Zhi Wang et al.
FUEL (2016)
Exploiting new combustion regime using multiple premixed compression ignition (MPCI) fueled with gasoline/diesel/PODE (GDP)
Haoye Liu et al.
FUEL (2016)
Effect of polyoxymethylene dimethyl ethers addition on spray and atomization characteristics using a common rail diesel injection system
Donghua Li et al.
FUEL (2016)
Experimental study of RCCI combustion and load extension in a compression ignition engine fueled with gasoline and PODE
Laihui Tong et al.
FUEL (2016)
Effects of diesel/PODE (polyoxymethylene dimethyl ethers) blends on combustion and emission characteristics in a heavy duty diesel engine
Jialin Liu et al.
FUEL (2016)
Performance, combustion and emission characteristics of a diesel engine fueled with polyoxymethylene dimethyl ethers (PODE3-4)/diesel blends
Haoye Liu et al.
ENERGY (2015)
Experimental study of spray characteristics of biodiesel derived from waste cooking oil
Balaji Mohan et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Effect of diethyl ether and ethanol additives on the combustion and emission characteristics of biodiesel-diesel blended fuel engine
D. H. Qi et al.
RENEWABLE ENERGY (2011)
Experimental and analytical study on biodiesel and diesel spray characteristics under ultra-high injection pressure
Xiangang Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2010)
Time resolved measurements of the initial stages of fuel spray penetration
J. Kostas et al.
FUEL (2009)
Development and validation of a theoretical model for diesel spray penetration
JM Desantes et al.
FUEL (2006)
Characterisation of very high pressure diesel sprays using digital imaging techniques
E Delacourt et al.
FUEL (2005)
Development and validation of a comprehensive two-zone model for combustion and emissions formation in a DI diesel engine
CD Rakopoulos et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2003)
Share Paper
