4.7 Article

Finite element modelling of reinforced masonry walls under axial compression

Related references

Note: Only part of the references are listed.
Article Engineering, Civil

Parametric study of multi-story, perforated, partially grouted masonry walls subjected to in-plane cyclic actions

Klaus A. S. Medeiros et al.

Summary: The load capacity of masonry walls is significantly influenced by ungrouted and grouted masonry strengths and mortar shear strength. The deflection of walls has correlations with masonry strength, vertical reinforcement, axial stress, and aspect ratio. Initial stiffness is particularly sensitive to axial stress and aspect ratio.

CANADIAN JOURNAL OF CIVIL ENGINEERING (2021)

Article Construction & Building Technology

Stress-Strain Behaviour of Masonry Prisms Constructed with Glass Fibre-Reinforced Grout

Omar Gouda et al.

Summary: The study shows that adding glass fibres to the grout can improve crack control and post-cracking performance, while increasing the compressive strength of concrete masonry prisms.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Civil

A rigid block model with no-tension elastic contacts for displacement-based assessment of historic masonry structures subjected to settlements

R. Gagliardo et al.

Summary: This paper presents a method for vulnerability assessment of historic masonry structures subjected to settlements using rigid block modelling. The displacement capacity in the large displacement regime is evaluated by push-down analysis. A variational formulation of the rigid block model is adopted, reducing computational costs. Validation against experimental campaigns and tests from literature was conducted, showing the effectiveness of the proposed method.

ENGINEERING STRUCTURES (2021)

Article Engineering, Civil

Simplified micro-modeling of partially-grouted reinforced masonry shear walls with bed-joint reinforcement: Implementation and validation

Sebastian Calderon et al.

Summary: This research aims to reproduce the behavior of partially grouted reinforced masonry (PG-RM) shear walls with bed-joint reinforcement in a simple yet accurate manner, addressing the limitations of traditional design expressions and unavailable commercial analysis methodologies.

ENGINEERING STRUCTURES (2021)

Article Construction & Building Technology

Experimental investigation on the effectiveness of lateral restrainers to the vertical steel in reinforced masonry walls under axial compression

Tatheer Zahra et al.

Summary: Reinforced masonry (RM) walls with grout embedded vertical steel reinforcements are commonly used in cyclonic and seismic regions. This research evaluates the effectiveness of lateral restrainers on the axial compression resistance of RM walls. Experimental results indicate that grout significantly enhances the axial capacity, while lateral restrainer detailing has no significant effect on steel strain development or overall strength.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Civil

Failure of masonry walls under high velocity impact ? A numerical study

Mohammad Asad et al.

Summary: This study investigates the failure of masonry walls under vehicular impacts using a homogenised material model with strain rate effects. The study reveals that the damage index is a key parameter for assessing the impact velocity of vehicles, as the damage area of the wall decreases with increasing impact velocity.

ENGINEERING STRUCTURES (2021)

Article Construction & Building Technology

Influence of pre-wetting, non-shrink grout, and scaling on the compressive strength of grouted concrete masonry prisms

Belal AbdelRahman et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Interfacial transition zone modelling for characterisation of masonry under biaxial stresses

Tatheer Zahra et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Engineering, Mechanical

Failure analysis of masonry walls subjected to low velocity impacts

Mohammad Asad et al.

ENGINEERING FAILURE ANALYSIS (2020)

Article Construction & Building Technology

Compressive strength of high-strength concrete masonry grouted prisms

Fernando S. Fonseca et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Engineering, Civil

Seismic performance parameters of fully grouted reinforced masonry squat shear walls

Hany M. Seif EDin et al.

ENGINEERING STRUCTURES (2019)

Article Engineering, Civil

In-plane shear strength equation for fully grouted reinforced masonry shear walls

Hany M. Seif ElDin et al.

ENGINEERING STRUCTURES (2019)

Article Construction & Building Technology

Out-of-Plane Behavior of Load-Bearing Reinforced Masonry Shear Walls

Shady Salem et al.

JOURNAL OF STRUCTURAL ENGINEERING (2019)

Article Engineering, Civil

Analysis of safety of slender concrete masonry walls in relation to CSA S304-14

Andrea C. Isfeld et al.

CANADIAN JOURNAL OF CIVIL ENGINEERING (2019)

Article Engineering, Civil

Influence of a window-type opening on the shear response of partially-grouted masonry shear walls

Sebastian Calderon et al.

ENGINEERING STRUCTURES (2019)

Article Computer Science, Interdisciplinary Applications

A detailed micro-modelling approach for the structural analysis of masonry assemblages

V Sarhosis et al.

COMPUTERS & STRUCTURES (2018)

Article Construction & Building Technology

Influence of blocks and grout on compressive strength and stiffness of concrete masonry prisms

Roseli Oliveira Guedes Martins et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Engineering, Civil

Progressive instability in circular masonry columns

M. Broseghini et al.

ENGINEERING STRUCTURES (2018)

Article Construction & Building Technology

High-Strength Concrete Masonry Walls under Concentric and Eccentric Loadings

Ernesto S. Fortes et al.

JOURNAL OF STRUCTURAL ENGINEERING (2018)

Article Construction & Building Technology

Out-of-Plane Behavior of Slender Reinforced Masonry Shear Walls under In-Plane Loading: Experimental Investigation

B. R. Robazza et al.

JOURNAL OF STRUCTURAL ENGINEERING (2018)

Article Construction & Building Technology

Masonry Walls under Combined In-Plane and Out-of-Plane Loadings

Sarkar Noor-E-Khuda et al.

JOURNAL OF STRUCTURAL ENGINEERING (2018)

Article Construction & Building Technology

Verification of second-order effects in slender reinforced masonry walls

Marco Dona et al.

MATERIALS AND STRUCTURES (2018)

Article Construction & Building Technology

High-Strength Concrete Masonry Walls under Concentric and Eccentric Loadings

Ernesto S. Fortes et al.

JOURNAL OF STRUCTURAL ENGINEERING (2018)

Article Construction & Building Technology

Out-of-Plane Behavior of Slender Reinforced Masonry Shear Walls under In-Plane Loading: Experimental Investigation

B. R. Robazza et al.

JOURNAL OF STRUCTURAL ENGINEERING (2018)

Article Construction & Building Technology

Masonry Walls under Combined In-Plane and Out-of-Plane Loadings

Sarkar Noor-E-Khuda et al.

JOURNAL OF STRUCTURAL ENGINEERING (2018)

Article Materials Science, Multidisciplinary

Shear response of partially-grouted reinforced masonry walls with a central opening: Testing and detailed micro-modelling

Sebastian Calderon et al.

MATERIALS & DESIGN (2017)

Article Engineering, Civil

Enhancement of lateral in-plane capacity of partially grouted concrete masonry shear walls

M. Bolhassani et al.

ENGINEERING STRUCTURES (2016)

Article Mechanics

Limit analysis of transversally loaded masonry walls using an innovative macroscopic strength criterion

Gabriele Milani et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)

Article Construction & Building Technology

Nonlinear finite element modelling of high bond thin-layer mortared concrete masonry

J. A. Thamboo et al.

INTERNATIONAL JOURNAL OF MASONRY RESEARCH AND INNOVATION (2016)

Article Engineering, Civil

Behaviour of thin layer mortared concrete masonry under combined shear and compression

Julian Ajith Thamboo et al.

AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING (2016)

Article Construction & Building Technology

Simplified micro modeling of partially grouted masonry assemblages

Mohammad Bolhassani et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Relationship between the Compressive Strength of Concrete Masonry and the Compressive Strength of Concrete Masonry Units

Ernesto S. Fortes et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)

Article Construction & Building Technology

Finite element analysis of the in-plane shear behaviour of masonry panels confined with reinforced grouted cores

Thangarajah Janaraj et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Computer Science, Interdisciplinary Applications

Estimation of the axial behaviour of masonry walls based on Artificial Neural Networks

Julio Garzon-Roca et al.

COMPUTERS & STRUCTURES (2013)

Article Construction & Building Technology

An orthotropic damage model for the analysis of masonry structures

Luca Pela et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Study of the influence of different parameters on the buckling behaviour of masonry walls

Cristian Sandoval et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Construction & Building Technology

Testing and numerical modelling of buckling failure of masonry walls

Cristian Sandoval et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Construction & Building Technology

Compressive behaviour of a new reinforced masonry system

Francesca da Porto et al.

MATERIALS AND STRUCTURES (2011)

Article Computer Science, Interdisciplinary Applications

Explicit finite element analysis of lightly reinforced masonry shear walls

M. Dhanasekar et al.

COMPUTERS & STRUCTURES (2008)

Article Construction & Building Technology

Continuum model for in-plane anisotropic inelastic behavior of masonry

Chiara Calderini et al.

JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2008)

Article Construction & Building Technology

Experimental in-plane strength investigation of reinforced concrete masonry walls with openings

K. C. Voon et al.

JOURNAL OF STRUCTURAL ENGINEERING (2008)

Article Engineering, Civil

Analysis of masonry structures:: review of and recent trends in homogenization techniques

Paulo B. Lourenco et al.

CANADIAN JOURNAL OF CIVIL ENGINEERING (2007)

Article Engineering, Civil

Experimental study of reinforced masonry walls subjected to combined axial load and out-of-plane bending

Y. Liu et al.

CANADIAN JOURNAL OF CIVIL ENGINEERING (2007)

Article Engineering, Mechanical

Failure analysis of Monastery of Jeronimos, Lisbon:: How to learn from sophisticated numerical models

P. B. Lourenco et al.

ENGINEERING FAILURE ANALYSIS (2007)