☆ 4.7 Article

A strain-rate cohesive fracture model of rocks based on Lennard-Jones potential

ENGINEERING FRACTURE MECHANICS (2022)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Peridynamic modeling of prefabricated beams post-cast with steelfiber reinforced high-strength concrete

Chen Xu et al.

Summary: The study indicates that steel fiber reinforced high-strength concrete has greater bearing capacity and better durability when connecting precast concrete members in prefabricated structures. Additionally, a numerical tool based on Peridynamics theory shows robustness in simulating continuous and discontinuous damage processes in structures. Through simulating the damage processes, the effectiveness of the numerical tool can be validated.

STRUCTURAL CONCRETE (2021)

Add to Collection

Article Geography, Physical

Rock slope failure in the Western Alps: A first comprehensive inventory and spatial analysis

S. Blondeau et al.

Summary: Rock slope failures in the Western Alps were systematically inventoried, totaling 1416 events impacting 9.1% of the study area. Spatial distribution analysis identified seven RSF super-hotspots, defining the most intensely overstressed areas of the region. These super-hotspots were found at sites where dynamic glaciers intersected or followed susceptible lithologies and structures during the Quaternary.

GEOMORPHOLOGY (2021)

Add to Collection

Article Energy & Fuels

Study on crack dynamic evolution and damage-fracture mechanism of rock with pre-existing cracks based on acoustic emission location

Yuanyuan Wang et al.

Summary: The acoustic emission (AE) location technique is used to characterize the entire progressive failure process of rock with preexisting cracks. The mechanical properties, AE characteristics, crack dynamic propagation process, failure modes and damage-fracture evolution rules were studied for prefabricated rock samples with different crack inclination angles under uniaxial compression. The results show that peak strength and elastic modulus show a decreasing-then-increasing trend with increasing crack angle, while AE activity exhibits different characteristics at different stages of the failure process. The AE location can accurately reflect crack initiation position, propagation direction, and surface orientation in the rock, and the failure modes of the rock samples change with increasing crack angle.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Effect of structural planes on rockburst distribution: Case study of a deep tunnel in Southwest China

Jianchao Wang et al.

Summary: Rockburst is a type of dynamic failure that can cause significant damage during underground construction. This study in Southwest China found that microseismic activity increases when joints with large scale appear and vanish, impacting rockburst risk. The dip angle of joints influences the likelihood of rockburst occurrence.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Effect of confining pressure on damage accumulation of rock under repeated blast loading

Haochen Wang et al.

Summary: Under in-situ stress conditions, the effect of confining pressure significantly changes the failure mode of granite sample, with blast-induced cracks mainly propagating along the direction of maximum principal stress. Repeated blast loading has little contribution to rock breakage in the direction of minimum principal stress. Pre-split blasting technology can considerably improve the stability of remaining rock mass in the blasting excavation of rock slope.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

Fracture mechanism of rock around a tunnel-shaped cavity with interconnected cracks under blasting stress waves

Xiaohan Li et al.

Summary: The existence of cracks in fractured rock masses significantly affects the stability of tunnels under dynamic disturbances. Research on tunnel fracture mechanisms under blasting stress waves with interconnected cracks shows that these cracks have an important influence on the dynamic response of tunnels. The stress distribution and fracture modes around the tunnel are significantly changed due to the existence of interconnected cracks.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Strength-induced peridynamic modeling and simulation of fractures in brittle materials

Yongwei Wang et al.

Summary: This hybrid modeling approach combines peridynamics and classical continuum mechanics to simulate brittle fracture, with peridynamics activated based on a strength criterion. The method captures the fracture process, including elastic deformation and crack nucleation and propagation, by coupling classical continuum mechanics and peridynamics into a closed equation system. An adaptive algorithm switches between the two models to successfully simulate fracture in complex structures.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Add to Collection

Article Geography, Physical

Recurrent rock avalanches progressively dismantle a mountain ridge in Beichuan County, Sichuan, most recently in the 2008 Wenchuan earthquake

J. Wasowski et al.

Summary: This study focuses on a large rock avalanche triggered by the 2008 Wenchuan earthquake in China, discussing the hazards and triggers of such events. Through historical research and geological surveys, slopes prone to rock avalanches can be identified, providing crucial information for disaster prevention.

GEOMORPHOLOGY (2021)

Add to Collection

Article Computer Science, Hardware & Architecture

Analysis on deformation mechanism of high rock slope of hydropower station under complex hydrogeology

Jiadi Geng et al.

Summary: This paper proposes a method to analyze the deformation mechanism of high rock slope of hydropower station under complex hydrogeology, by constructing various constitutive models and analyzing the failure mode of high rock slope. The results show that the method is effective in accurately analyzing the deformation mechanism of the high rock slope of hydropower station.

MICROPROCESSORS AND MICROSYSTEMS (2021)

Add to Collection

Article Construction & Building Technology

Analysis of factors affecting the deformation of soft rock tunnels by data envelopment analysis and a risk assessment model

Chenghao Bai et al.

Summary: This study establishes a deformation risk assessment system for soft rock tunnels based on twelve main influencing factors and utilizes data envelopment analysis to analyze the efficiency of these factors. A risk assessment model is developed using a normal cloud model and verified with actual deformation cases, confirming its consistency with real deformation risk degrees.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)

Add to Collection

Article Construction & Building Technology

Effect of inclined interface angle on shear strength and deformation response of cemented paste backfill-rock under triaxial compression

Weilv Wu et al.

Summary: This study experimentally investigated the effect of interface angle on the triaxial deformation behavior and shear strength of cemented paste backfill-rock. The results showed that the interface angle played a dominant role in the failure patterns of CPB-rock, and increasing the cement content improved the brittleness of CPB matrix and increased the shear strength difference between CPB-rock and CPB.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Mechanics

Cohesive fracture model of rocks based on multi-scale model and Lennard-Jones potential

Qindong Lin et al.

Summary: A novel cohesive fracture model is proposed in this study based on the multiscale model of rocks and the Lennard-Jones potential between non-bonding molecules, establishing the relationship between deformation and potential energy. The accuracy of the cohesive fracture model is verified through three numerical simulations, showing that it can accurately fit theoretical values and experimental results in Mode-I and Mode-II tests, as well as simulate the uniaxial compressive strength and fracture pattern of rocks in uniaxial compression tests.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Mechanics

A rate-dependent cohesive zone model with the effects of interfacial viscoelasticity and progressive damage

Gang Zhao et al.

Summary: The study presents a generalized rate-dependent cohesive zone model for describing the interfacial viscoelasticity and progressive damage of mode I fracture. By removing traditional assumptions and establishing rate-dependent parameters, the proposed model efficiently extends cohesive mechanics, and introduces a generalized Maxwell model to describe the stress-strain relationship with fewer material parameters.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Mechanics

A re-evaluation of mixed-mode cohesive zone modeling based on strength concepts instead of traction laws

John A. Nairn et al.

Summary: This study proposes a new method for implementing cohesive zones by re-interpreting traction laws as strength models and using concepts from damage mechanics. The new strength cohesive zone modeling approach provides improved modeling for problems with changing mode mixity and predicts convex failure envelopes for all G(I)-G(II) cases. The method also reveals limitations in previous approaches and suggests a need for reanalysis of prior experimental results.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Mechanics

Incorporating asperity strength into rock joint constitutive model for approximating asperity damage: An insight from DEM modelling

Mahdi Saadat et al.

Summary: This paper presents a Rock Joint Constitutive Model developed using a Discrete Element Method (DEM) experiment, considering lab-scale geometrical parameters of waviness and unevenness. A systematic parametric study was conducted to investigate the influence of asperity area and asperity angle on peak shear strength and peak dilation angle. By defining damage functions and strength parameters, the model successfully simulated the dilative and frictional characteristics of rock joints.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Engineering, Geological

Study on the effect of micro-geometric heterogeneity on mechanical properties of brittle rock using a grain-based discrete element method coupling with the cohesive zone model

Cheng Pan et al.

Summary: A method coupling the discrete element method with the cohesive zone model was proposed to study the influence of mineral grain size distribution and preferred orientation on the mechanical behavior and failure mode of rocks. Numerical examinations showed a relationship between micro-geometric heterogeneity and the mechanical properties and failure mode of rocks.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

Add to Collection

Article Engineering, Mechanical

Local stress distribution and evolution surrounding flaw and opening within rock block under uniaxial compression

Xiang Fan et al.

Summary: Tunnel excavation alters the stress state, leading to rock fractures, with research focusing on stress and displacement evaluation around openings. Flaws and openings significantly affect internal stress within the rock mass, concentrating stress around specific positions. When flaws and openings coexist, there is interaction of internal stress. This study used the PFC program to analyze stress evolution around flaws and openings, presenting stress distributions and principal stress evolutions in different loading stages and orientations. The numerical method proposed can be valuable in evaluating local stress distribution and evolution surrounding flaws and openings.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Add to Collection

Article Engineering, Multidisciplinary

A novel three-dimensional hydraulic fracturing model based on continuum-discontinuum element method

Xinguang Zhu et al.

Summary: A new three-dimensional hydraulic fracturing model is proposed in this paper, which can comprehensively consider the continuum field, crack opening, pore seepage field and fracture seepage field. The model accurately predicts the fracture pattern and captures the poroelastic stress through comparison and analysis.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Rock fragmentation induced by a TBM disc-cutter considering the effects of joints: A numerical simulation by DEM

Yadong Xue et al.

Summary: The study reveals that rock structural parameters and joint parameters have a significant impact on cutting force, rock fragmentation volume, and cutting efficiency. The simulation results show that an elastic-plastic contact model can better simulate the plastic deformation characteristics of brittle rock.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A half-space based contact detection algorithm for complex blocks

Xinquan Wang et al.

Summary: Contact detection algorithm is critical for discontinuous calculation method, with accuracy directly affecting simulation results. This proposed algorithm includes two stages: identifying potential contact pairs and judging contact status through half-space.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A modified cohesive damage-plasticity model for distinct lattice spring model on rock fracturing

Xin-Dong Wei et al.

Summary: A modified cohesive damage-plasticity model was developed for simulating damage evolution and fracture process in quasi-brittle materials, with correctness and feasibility verified through numerical examples and comparisons with experimental or numerical solutions.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A rate-dependent model and its user subroutine for cohesive element method to investigate propagation and branching behavior of dynamic brittle crack

Shen Wang et al.

Summary: The study investigates the branching behavior of dynamic brittle crack induced by multi crack bifurcation. A rate-dependent constitutive law for cohesive element is proposed, showing that the most superior constitutive relationship is the one in which only the maximum separation displacement is rate-dependent. Additionally, the crack branching angle is positively correlated with fracture energy and is advanced with an increase in Young's modulus.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Mechanics

An irreversible bilinear cohesive law considering the effects of strain rate and plastic strain and enabling reciprocating load

Li Meng et al.

Summary: A new bilinear cohesive law is proposed in this paper that can consider the effects of strain rate and plastic strain, and handle reciprocating load. Compared with the commonly used bilinear cohesive law, this new law has a significant difference in coupling normal traction and tangential traction. Furthermore, when combined with finite thickness modeling method of cohesive element, it can effectively solve various problems.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Engineering, Mechanical

A micropolar peridynamic model with non-uniform horizon for static damage of solids considering different nonlocal enhancements

Yiming Zhang et al.

Summary: A micropolar peridynamics approach with a non-uniform horizon (NHPD) is proposed in this work to enhance the flexibility of traditional Peridynamic models. By modifying the dual-horizon approach and implementing a pointdependent horizon, the new method shows weak mesh dependency and effective failure prediction for Brazilian disk tests.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Add to Collection

Article Construction & Building Technology

A path for evaluating the mechanical response of rock masses based on deep mining-induced microseismic data: A case study

Yong Zhao et al.

Summary: Deep, high-intensity mining has become a general trend in mineral resource extraction operations, leading to more complex mechanical environments and potential ground-pressure-induced disasters. This study proposed a method using mining-induced microseismic data to evaluate the mechanical response of surrounding rocks, which was validated in a test stope of Xiadian Gold Mine. The research provides guidance for deep mine design and support design.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)

Add to Collection

Article Geosciences, Multidisciplinary

Updating the models and uncertainty of mechanical parameters for rock tunnels using Bayesian inference

Hongbo Zhao et al.

Summary: The study introduces a system of Bayesian inferences to update mechanical parameters of a rock tunnel model dynamically using monitored field data. The regular supplementation of monitoring data greatly enhances the performance of Bayesian inferences in determining the mechanical parameters of the surrounding rock mass in a tunnel model.

GEOSCIENCE FRONTIERS (2021)

Add to Collection

Article Mathematics, Interdisciplinary Applications

A dynamic hybrid local/nonlocal continuum model for wave propagation

Fei Han et al.

Summary: In this study, a dynamic hybrid local/nonlocal continuum model is developed to simulate wave propagations and crack nucleations in a linear elastic solid. The coupling of local and nonlocal models enhances accuracy and precision, successfully capturing the behavior of waves and crack formations in structural domains.

COMPUTATIONAL MECHANICS (2021)

Add to Collection

Article Mathematics, Applied

On the crack opening and energy dissipation in a continuum based disconnected crack model

Yiming Zhang et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2020)

Add to Collection

Article Engineering, Multidisciplinary

Global cracking elements: A novel tool for Galerkin-based approaches simulating quasi-brittle fracture

Yiming Zhang et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

Dynamic mechanical characteristics and fracture mechanism of gas-bearing coal based on SHPB experiments

Xiangguo Kong et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Mechanics

Simulating fracture in rock using a micropolar peridynamic formulation

Vito Diana et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Mechanical

Mesoscale modelling of concrete under high strain rate tension with a rate-dependent cohesive interface approach

Rongxin Zhou et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

Add to Collection

Article Geosciences, Multidisciplinary

Research on dynamic compressive behaviors of marble under high strain rates with split Hopkinson pressure bar

Fuzeng Wang et al.

JOURNAL OF STRUCTURAL GEOLOGY (2020)

Add to Collection

Article Energy & Fuels

Numerical modeling of the tool-rock penetration process using FEM coupled with SPH technique

Aria Mardalizad et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Engineering, Environmental

Rock bridge fracturing characteristics in granite induced by freeze-thaw and uniaxial deformation revealed by AE monitoring and post-test CT scanning

Y. Wang et al.

COLD REGIONS SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Mathematics, Applied

Cracking elements method with 6-node triangular element

Linlong Mu et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2020)

Add to Collection

Article Energy & Fuels

Numerical simulation of hydraulic fracture deflection influenced by slotted directional boreholes using XFEM with a modified rock fracture energy model

Shen Wang et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Engineering, Industrial

Safe strategy for coal and gas outburst prevention in deep-and-thick coal seams using a soft rock protective layer mining

Liang Wang et al.

SAFETY SCIENCE (2020)

Add to Collection

Article Engineering, Geological

Dynamic compression characteristics of layered rock mass of significant strength changes in adjacent layers

Sen Wen et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2020)

Add to Collection

Article Mechanics

A new SPH-based continuum framework with an embedded fracture process zone for modelling rock fracture

Yingnan Wang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical investigation of crack propagation and dynamic properties of rock in SHPB indirect tension test

Dihao Ai et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Thermoelastic fracture modelling in 2D by an adaptive cracking particle method without enrichment functions

Weilong Ai et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Engineering, Mechanical

Cracking elements method for dynamic brittle fracture

Yiming Zhang et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

Add to Collection

Article Engineering, Mechanical

An efficient CDEM-based method to calculate full-scale fragment field of warhead

Haozhe Wang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

Add to Collection

Article Engineering, Geological

Dynamic triaxial compression tests on sandstone at high strain rates and low confining pressures with split Hopkinson pressure bar

Feng-Qiang Gong et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Add to Collection

Article Engineering, Geological

Numerical analysis of the dynamic evolution of mining-induced stresses and fractures in multilayered rock strata using continuum-based discrete element methods

Yang Ju et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Add to Collection

Article Energy & Fuels

Rock brittleness evaluation based on energy dissipation under triaxial compression

Ning Li et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Physical and numerical evaluation of rock strength in Split Hopkinson Pressure Bar testing

A. Fakhimi et al.

COMPUTERS AND GEOTECHNICS (2018)

Add to Collection

Article Mechanics

3D numerical modelling of rock fracture with a hybrid finite and cohesive element method

Hongxiang Jiang et al.

ENGINEERING FRACTURE MECHANICS (2018)

Add to Collection

Article Mathematics, Applied

Cracking elements: A self-propagating Strong Discontinuity embedded Approach for quasi-brittle fracture

Yiming Zhang et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2018)

Add to Collection

Article Energy & Fuels

Numerical simulation of hydraulic fracture propagation in naturally fractured formations using the cohesive zone model

Arash Dahi Taleghani et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Engineering, Geological

An XFEM element to model intersections between hydraulic and natural fractures in porous rocks

Francisco Cruz et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)

Add to Collection

Article Geosciences, Multidisciplinary

On the use of a split Hopkinson pressure bar in structural geology: High strain rate deformation of Seeberger sandstone and Carrara marble under uniaxial compression

Ruprecht Zwiessler et al.

JOURNAL OF STRUCTURAL GEOLOGY (2017)

Add to Collection

Article Geochemistry & Geophysics

Trace-element composition of minerals and rocks in the Belaya Zima carbonatite complex (Russia): Implications for the mechanisms of magma evolution and carbonatite formation

Anna G. Doroshkevich et al.

LITHOS (2017)

Add to Collection

Proceedings Paper Green & Sustainable Science & Technology

Influence of rock microstructure on its electrical properties: an analysis using x-ray microcomputed tomography

Taufiq Rahman et al.

13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13 (2017)

Add to Collection

Proceedings Paper Mining & Mineral Processing

Estimation of Mode I Fracture Toughness of Rock by Semi-Circular Bend Test under Confining Pressure Condition

Minami Kataoka et al.

ISRM EUROPEAN ROCK MECHANICS SYMPOSIUM EUROCK 2017 (2017)

Add to Collection

Article Engineering, Multidisciplinary

A morphing approach to couple state-based peridynamics with classical continuum mechanics

Fei Han et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Adaptive coupling between damage mechanics and peridynamics: A route for objective simulation of material degradation up to complete failure

Fei Han et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)

Add to Collection

Article Energy & Fuels

CDEM-based analysis of the 3D initiation and propagation of hydrofracturing cracks in heterogeneous glutenites

Yang Ju et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Strong discontinuity embedded approach with standard SOS formulation: Element formulation, energy-based crack-tracking strategy, and validations

Yiming Zhang et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)

Add to Collection

Article Engineering, Geological

Shear strength of discontinuities in sedimentary rock masses based on direct shear tests

Manouchehr Sanei et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

Add to Collection

Article Engineering, Mechanical

Modeling of dynamic fracture based on the cracking particles method

V. Kumar et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)

Add to Collection

Article Engineering, Geological

Failure of transversely isotropic rock under Brazilian test conditions

Andre Vervoort et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)

Add to Collection

Article Physics, Applied

Dynamic van der Waals interaction of a moving atom with the walls of a flat slit

G. V. Dedkov et al.

TECHNICAL PHYSICS (2014)

Add to Collection

Article Engineering, Geological

A semi-spring and semi-edge combined contact model in CDEM and its application to analysis of Jiweishan landslide

Chun Feng et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2014)

Add to Collection

Article Chemistry, Physical

Dynamical van der Waals atom-surface interaction

G. V. Dedkov et al.

SURFACE SCIENCE (2011)

Add to Collection

Article Engineering, Mechanical

Model-based simulation of the synergistic effects of blast and fragmentation on a concrete wall using the MPM

Wenqing Hu et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2006)

Add to Collection

Article Chemistry, Physical

The effect of temperature on the Lennard-Jones (6-12) pair potential function

A Nasezadeh et al.

JOURNAL OF MOLECULAR STRUCTURE-THEOCHEM (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.