Journal
ENERGY CONVERSION AND MANAGEMENT
Volume 248, Issue -, Pages -Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.enconman.2021.114807
Keywords
Chitosan; Magnetic catalyst; Heterogeneous catalyst; Transesterification; Response surface methodology
Categories
Ask authors/readers for more resources
In this research, biodiesel was successfully produced from waste cooking oil using a novel catalyst, NaOH/Chitosan-Fe3O4, with a high FAME yield of 92%. The optimized conditions included a catalyst of 0.5 wt%, methanol to oil ratio of 6:1, and a reaction time of 4.5 hours, showing that the produced biodiesel had similar properties to conventional petro-diesel. Additionally, a kinetic study revealed a pseudo-first-order kinetics with an activation energy of 21 kJ/mol, and thermodynamic calculations indicated values of 0.23 kJ/mol K for Delta S, 18.20 kJ/mol for Delta H, and 95.13 kJ/mol for Delta G.
In this research, biodiesel was produced from waste cooking oil (WCO) via a magnetically and biodegradable heterogeneous base catalyst of NaOH/Chitosan-Fe3O4. The catalyst was characterized using X-ray powder diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-Ray (EDX), EDX-mapping, Vibrating-Sample Magnetometer (VSM), Brunauer-Emmett-Teller (BET), Transmission Electron Microscopy (TEM), and Fourier-transform infrared spectroscopy (FTIR) analyses. The catalyst performance was also studied in the transesterification reaction of WCO conversion to biodiesel. The process was optimized via the central composite design (CCD) through the response surface methodology (RSM) method. The influences of major factors, including methanol to oil molar ratio (6:1-12:1), catalyst weight (0.25-1 wt%), and time (4-8 h), were examined on the reaction behavior. The maximum FAME yield was 92% under the following optimal conditions: 0.5 wt% NaOH/Chitosan-Fe3O4 catalyst, methanol to oil ratio of 6:1, reaction time of 4.5 h, and temperature of 25 degrees C. The Gas Chromatography-Mass Spectrometry (GC-MS) and Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) were used to determine the fatty acid profile and metal contents of samples, respectively. Based on the physicochemical properties, it was concluded that the produced biodiesel had the same properties as conventional petro-diesel. Further, a kinetic study revealed that the electrolysis method was a situ-transesterification reaction with a pseudo-first-order kinetics and activation energy of 21 kJ/mol. From the thermodynamic calculations, the values of Delta S, Delta H, and Delta G were found to be 0.23 kJ/mol K, 18.20 kJ/mol, and 95.13 kJ/mol, respectively.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available