☆ 4.7 Article

An advanced Grid Diagram for heat exchanger network retrofit with detailed plate heat exchanger design

ENERGY (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Experimental and numerical investigation of brazed plate heat exchangers-A new approach

Alireza Jafari et al.

Summary: Experimental and numerical investigations were conducted on a brazed plate heat exchanger, comparing the results of different numerical modeling approaches with experimental data to find the best agreement, which was achieved with a model taking into account the original geometry with brazing joints. The complex plate geometry was found to be a key factor influencing the discrepancies between simulations and experiments.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Post COVID-19 ENERGY sustainability and carbon emissions neutrality

Cheng Tung Chong et al.

Summary: This review covers recent advancements in selected emerging energy sectors, focusing on carbon emission neutrality and energy sustainability in the post-COVID-19 era.

ENERGY (2022)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Qualitative and Quantitative Performance Comparison of Recent Optimization Algorithms for Economic Optimization of the Heat Exchangers

Vivek Patel et al.

Summary: This study compared and analyzed the performance of nine optimization algorithms in the economic optimization of heat exchangers, considering different types of heat exchangers and conducting statistical analysis. The study found that constraint handling techniques have an impact on algorithm performance, and ultimately presented the economically optimized geometry of heat exchangers and the convergence of minimum total cost solutions for each algorithm.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Configuration optimization of a membrane-based total heat exchanger with cross-corrugated triangular ducts considering thermal economy and entropy generation

Yukui Men et al.

Summary: This study investigates a new structure of membrane-based total heat exchanger with cross-corrugated triangular ducts to enhance convective heat transfer. The research focuses on optimizing the geometric design parameters while considering thermal irreversibility and economic benefits. Multiple objective functions are used to evaluate the performance of the heat exchanger, and a global sensitivity analysis is conducted to select the most influential parameters for optimization.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Impact of velocities and geometry on flow components and heat transfer in plate heat exchangers

Damir Dovic et al.

Summary: This study aims to better understand the complex flow phenomena in plate heat exchangers through numerical simulations and experimental tests at different corrugation angles, providing insights into the impact of flow patterns on heat transfer and pressure drop characteristics. The results demonstrate the importance of substreams velocity on interactions and flow components size, influencing the heat transfer and pressure drop performance of plate heat exchanger channels.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

A robust design method for retrofit of industrial heat exchanger networks using modified stage-wise model

Natchanon Angsutorn et al.

Summary: This paper presents a robust heat exchanger network retrofit method for industrial applications, which reduces mathematical difficulties, provides practical heat exchanger networks for industries, and offers a sustainable systematic solving method that guarantees good feasible solutions within a reasonable computational time.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A trust region framework for heat exchanger network synthesis with detailed individual heat exchanger designs

Saif R. Kazi et al.

Summary: A trust region filter strategy is developed for simultaneous optimal design of heat exchanger networks, incorporating detailed design of shell-and-tube heat exchangers. By utilizing mixed-integer nonlinear programming and non-isothermal mixing nonlinear programming suboptimization, the strategy aids in effectively converging to solutions of the overall design problem.

COMPUTERS & CHEMICAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Improving thermal energy recovery systems using welded plate heat exchangers

Martin Picon-Nunez et al.

Summary: This paper demonstrates the application of welded plate heat exchanger (WPHE) technology in energy recovery systems, showing that the implementation of multifluid units can reduce the number of units and provide potential benefits. By developing a thermohydraulic model to determine unit dimensions that meet the required heat duty and pressure drop restrictions, the study applies the approach to multifluid cases in a crude oil preheat train.

ENERGY (2021)

Add to Collection

Article Thermodynamics

An improved algorithm for synthesis of heat exchanger network with a large number of uncertain parameters

Klavdija Zirngast et al.

Summary: This paper presents an improved method for the synthesis of flexible Heat Exchanger Network with a large number of uncertain parameters using MINLP. By decomposing the problem into simpler subproblems and solving them sequentially, the exponential growth with the number of uncertain parameters is avoided. The introduction of correction factors into the objective function during variable determination improves the trade-offs and mitigates the effect of decomposition.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Plate heat exchanger design for the utilisation of waste heat from exhaust gases of drying process

Olga Arsenyeva et al.

Summary: A novel model for commercially produced plate heat exchangers in waste heat recovery processes was developed and proven to be accurate in predicting heat transfer coefficients. The study showed significant energy savings in industrial applications using the developed mathematical model and obtained correlations.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Optimization route arrangement: A new concept to achieve high efficiency and quality in heat exchanger network synthesis

Yue Xu et al.

Summary: Heuristic algorithms are widely used in heat exchanger network synthesis, but existing algorithms often struggle with balancing global and local search. This paper proposes a new modular concept that allows for flexible combining and sequencing of functions to improve algorithm efficiency. The proposed method demonstrates improved results in large-scale HENS.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Experimental and numerical study of innovative plate heat exchanger design in simplified hot box of SOFC

Han-Taw Chen et al.

Summary: The study investigates the three-dimensional natural convection heat transfer of an innovative plate heat exchanger in a hot box through a combination of experimental measurements and inverse computational fluid dynamics simulation. The selection of appropriate flow models, wall functions, and determination of heat transfer rates are influenced by the spacing between the ducts and the convection environment. The findings highlight the importance of considering duct locations and flow model selection for accurate results in natural convection heat transfer.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Heat transfer and pressure drop of supercritical CO2 in brazed plate heat exchangers of the tri-partite gas cooler

Alireza Zendehboudi et al.

Summary: This paper investigates the heat transfer and pressure drop characteristics of supercritical CO2 in brazed plate heat exchangers, finding that thermal resistance in the CO2 side is the main factor affecting total heat transfer. Increasing CO2 mass flow rate significantly improves heat transfer coefficients, and factors such as water flow rate, CO2 pressure, and buoyancy force also play a role in heat transfer under different operating conditions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Heat integration incorporating leakage risk assessment of heat exchanger networks

Bohong Wang et al.

Summary: Heat exchanger leakage can lead to equipment shutdown, affecting production economy and equipment safety. This study introduces a quantitative risk characterization of leakage into the Heat Integration dataset using a mathematical model and iteration algorithm, allowing engineers to use a quantitative criterion for HI.

COMPUTERS & CHEMICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Evaluation of the aging of elastomeric acrylonitrile-butadiene rubber and ethylene-propylene-diene monomer gaskets used to seal plates heat exchanger

Elias Luiz de Souza et al.

Summary: The study investigated the degradation of NBR and EPDM gaskets under similar service conditions, finding that EPDM exhibited a more reliable behavior for gasket and seal applications. Thermo-oxidative aging led to increased compression set for EPDM, while for NBR, diffusion-limited oxidation resulted in heterogeneous oxidation and a crosslinking network near the surface. The presence of a groove reduced side thermo-oxidation and limited oxygen access, affecting the degradation mechanisms of the gaskets.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Heat exchanger network retrofit with heat exchanger and material type selection: A review and a novel method

Bohong Wang et al.

Summary: This paper reviews the characteristics, working conditions, and investment costs of various types of heat exchangers, as well as introduces a framework for HEN retrofit considering heat exchanger and material selection. The retrofit design process is divided into diagnosis and optimization stages, utilizing graphical decision-making tools and optimization algorithms to analyze and optimize existing HEN systems. By selecting suitable types of new heat exchangers and materials, the retrofitted design can significantly reduce utility costs.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Thermodynamics

Improvement of thermal-hydraulic performance of plate heat exchanger by electroless nickel, copper and silver plating

Dong Ho Nguyen et al.

Summary: In this study, electroless plating of nickel, copper, and silver was used on stainless steel 316 plate heat exchangers to enhance their thermal-hydraulic efficiency. Optimized process parameters were determined for improving surface properties and reducing mass loss, leading to a significant increase in performance as indicated by various evaluation criteria.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Thermal-hydraulic performance investigation of an aluminium plate heat exchanger and a 3D-printed polymer plate heat exchanger

S. Lowrey et al.

Summary: In dry conditions, both aluminium and polymer heat exchangers exhibit similar thermal characteristics, with a thermal effectiveness greater than or equal to 0.50. However, under wet conditions, the aluminium heat exchanger outperforms the polymer heat exchanger. Despite the lower performance of the polymer heat exchanger, it still shows promise as a good alternative to metal heat exchangers in heat recovery applications.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Comparison of flow resistance and port maldistribution between novel and conventional plate heat exchangers

Salman Al-Zahrani et al.

Summary: This study compares the performance of modified CPHEs with conventional CPHEs in terms of thermal performance, flow resistance, etc. The results show that the modified CPHEs have higher friction factors, port maldistribution, and turbulence kinetic energy compared to the conventional CPHEs, but they require higher pumping power.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Creep Behavior of Diffusion-Welded Alloy 617

Injin Sah et al.

Summary: The study focused on the manufacturing and evaluation of a diffusion weldment for plate-type heat exchangers in the next-generation nuclear industry. Microscopic analysis showed the formation of Al-rich oxides along the interface, hindering grain-boundary movement and resulting in premature brittle fracture. Despite lower performance compared to the original alloy, the diffusion weldment exhibited some stability under high stress conditions.

METALS (2021)

Add to Collection

Article Thermodynamics

Thermal performance optimization of heat exchanger with mixed cross-corrugated sinusoidal plate channels

Ma Qingchan et al.

Summary: The heat transfer performance of heat exchanger with mixed cross-corrugated plate is influenced by factors such as phase shift angle and Reynolds number. The heat transfer performance of the lower wall is always superior to that of the upper wall, with the optimal heat transfer performance achieved at a phase shift angle of 324°.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Heat recovery in an actual LNG supply chain: Retrofitting of designed heat exchange networks (HENs) for potential fuel saving

Asmaa Othman et al.

Summary: The study focused on energy recovery and conservation in LNG processing by optimizing heat exchanger networks, showing significant potential for reducing energy consumption through improved network design.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Add to Collection

Article Engineering, Chemical

A surrogate-based optimization framework for simultaneous synthesis of chemical process and heat exchanger network

Mingxin Li et al.

Summary: Heat-integrated process synthesis is fundamental for achieving higher energy efficiency. A surrogate-based optimization framework is proposed for simultaneous synthesis of chemical process and heat exchanger network, aiming at maximizing annual profit.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2021)

Add to Collection

Article Thermodynamics

A target-evaluation method for heat exchanger network optimisation with heat transfer enhancement

Nianqi Li et al.

Summary: This study focuses on energy conservation and efficiency improvement for industrial process systems, particularly through heat transfer enhancement in heat exchanger network retrofit. A target-evaluation method is proposed and validated through two case studies, showing that enhancing the best candidate heat exchanger can bring more energy-saving and better economic efficiency.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Linking pinch analysis and shifted temperature driving force plot for analysis and retrofit of heat exchanger network

Dianliang Fu et al.

Summary: The article discusses the use of the shifted temperature driving force plot in retrofitting heat exchanger networks to optimize heat exchange and avoid crossing the network pinch, resulting in more efficient energy recovery. Through the application of this graphical tool, better retrofit solutions can be found with improved economic benefits.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Multidisciplinary

Performance of weld bead profile during A-TIG welding on nitrogen alloyed stainless steel

Akash Deep et al.

Summary: The use of TiO2 flux in A-TIG welding of ASS-201 grade results in higher penetration compared to SiO2 flux, whereas welding with SiO2 leads to higher hardness in the HAZ and weld region than the TIG welding process.

ENGINEERING RESEARCH EXPRESS (2021)

Add to Collection

Article Thermodynamics

Multi-objective optimum design for double baffle heat exchangers

Bahador Abolpour et al.

Summary: A new optimization approach combining genetic algorithm, image processing, and computational fluid dynamics is proposed to enhance the heat transfer rate and reduce pressure drop in heat exchangers. By optimizing the dimensions and arrangement of baffles, the design of the heat exchanger considering turbulent fluid flow is achieved.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)

Add to Collection

Article Thermodynamics

HEAT TRANSFER OF A STACK OF LOW-THERMAL-CONDUCTIVITY PLATES IN CYCLIC HEAT EXCHANGE WITH COLD AND HOT MEDIA

Yu. A. Kirsanov et al.

Summary: The authors described a laboratory bench with a regenerative air heater and an automated system for control and measurement of air flows and packing parameters. They developed a mathematical model to analyze thermal processes in heat transfer agents and packing, presenting calculations of heat transfer coefficients of the plate. The study assessed coefficients of heat transfer of the plate's lateral and end surfaces.

JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Heat transfer enhancement, intensification and optimisation in heat exchanger network retrofit and operation

Jiri Jaromir Klemes et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Energy & Fuels

An Extended Grid Diagram for Heat Exchanger Network Retrofit Considering Heat Exchanger Types

Bohong Wang et al.

ENERGIES (2020)

Add to Collection

Article Thermodynamics

Heat exchanger network retrofit by a shifted retrofit thermodynamic grid diagram-based model and a two-stage approach

Bohong Wang et al.

ENERGY (2020)

Add to Collection

Review Thermodynamics

Compact heat exchangers for supercritical CO2 power cycle application

Jin Su Kwon et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Energy & Fuels

Heat flow diagram as an extension of bridge retrofit method to save energy in heat exchanger networks

A. Mosadeghkhah et al.

APPLIED ENERGY (2020)

Add to Collection

Article Thermodynamics

Graphical customisation of process and utility changes for heat exchanger network retrofit using individual stream temperature versus enthalpy plot

Yee Qing Lai et al.

ENERGY (2020)

Add to Collection

Article Thermodynamics

Multiple-solution heat exchanger network synthesis for enabling the best industrial implementation

Akos Orosz et al.

ENERGY (2020)

Add to Collection

Article Energy & Fuels

Long-term investment and maintenance planning for heat exchanger network retrofit

Hon Huin Chin et al.

APPLIED ENERGY (2020)

Add to Collection

Article Engineering, Multidisciplinary

Fatigue performance evaluation of plate and shell heat exchangers

G. S. M. Martins et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Heat exchanger networks retrofit with an extended superstructure model and a meta-heuristic solution approach

Leandro Pavao et al.

COMPUTERS & CHEMICAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Simultaneous optimization strategies for heat exchanger network synthesis and detailed shell-and-tube heat-exchanger design involving phase changes using GA/SA

Wu Xiao et al.

ENERGY (2019)

Add to Collection

Article Engineering, Chemical

An Optimization-Based Approach for Simultaneous Chemical Process and Heat Exchanger Network Synthesis

Lingxun Kong et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Add to Collection

Article Thermodynamics

A novel heat exchanger network retrofit approach based on performance reassessment

Ning Jiang et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection

Article Thermodynamics

Temperature driving force (TDF) curves for heat exchanger network retrofit - A case study and implications

Dina A. Kamel et al.

ENERGY (2017)

Add to Collection

Article Thermodynamics

Two-step hybrid approach for the synthesis of multi-period heat exchanger networks with detailed exchanger design

Michael Short et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Thermodynamics

Two types of welded plate heat exchangers for efficient heat recovery in industry

Olga P. Arsenyeva et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Thermodynamics

Conceptual insights to debottleneck the Network Pinch in heat-integrated crude oil distillation systems without topology modifications

Mamdouh A. Gadalla et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Add to Collection

Review Thermodynamics

Flow boiling and frictional pressure gradients in plate heat exchangers. Part 1: Review and experimental database

Raffaele L. Amalfi et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2016)

Add to Collection

Article Thermodynamics

Heat exchanger network retrofit supported by extended Grid Diagram and heat path development

Jun Yow Yong et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Comparison between pinch analysis and bridge analysis to retrofit the heat exchanger network of a kraft pulp mill

J. C. Bonhivers et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Article Thermodynamics

The influence of plate corrugations geometry on plate heat exchanger performance in specified process conditions

O. Arsenyeva et al.

ENERGY (2013)

Add to Collection

Review Green & Sustainable Science & Technology

Assessment of the optimum operation conditions of a plate heat exchanger for waste heat recovery in textile industry

Canan Kandilli et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)

Add to Collection

Article Engineering, Environmental

STEP-A new graphical tool for simultaneous targeting and design of a heat exchanger network

Sharifah R. Wan Alwi et al.

CHEMICAL ENGINEERING JOURNAL (2010)

Add to Collection

Article Green & Sustainable Science & Technology

Prediction models for density and viscosity of biodiesel and their effects on fuel supply system in CI engines

B. Tesfa et al.

RENEWABLE ENERGY (2010)

Add to Collection

Article Thermodynamics

The flow in an oil/water plate heat exchanger for the automotive industry

A. Lozano et al.

APPLIED THERMAL ENGINEERING (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.