Related references
Note: Only part of the references are listed.Hydrothermal performance of twisted elliptical tube equipped with twisted tape insert
Ramin Mashayekhi et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)
Upgrading Waste Heat from 90 to 110 °C: The Potential of Adsorption Heat Transformation
Mirko Engelpracht et al.
ENERGY TECHNOLOGY (2021)
Plastic heat exchangers for adsorption cooling: Thermodynamic and dynamic performance
Alessio Sapienza et al.
APPLIED THERMAL ENGINEERING (2021)
A comprehensive simulation tool for adsorption-based solar-cooled buildings - Control strategy based on variable cycle duration
Giorgos Papakokkinos et al.
ENERGY AND BUILDINGS (2021)
Study on optimized adsorption chiller employing various heat and mass recovery schemes
Mahbubul Muttakin et al.
INTERNATIONAL JOURNAL OF REFRIGERATION (2021)
Optimized sorber bed heat and mass exchangers for sorption cooling systems
Hesam Bahrehmand et al.
APPLIED THERMAL ENGINEERING (2021)
Effect of coating thickness, binder and cycle time in adsorption cooling applications
Xuan Quang Duong et al.
APPLIED THERMAL ENGINEERING (2021)
Effect of Additives on the Sorption Kinetics of a Silica Gel Bed in Adsorption Chiller
Karol Sztekler et al.
ENERGIES (2021)
Consecutive charging and discharging of a PCM-based plate heat exchanger with zigzag configuration
Pouyan Talebizadehsardari et al.
APPLIED THERMAL ENGINEERING (2021)
Adsorbents, Working Pairs and Coated Beds for Natural Refrigerants in Adsorption Chillers-State of the Art
Piotr Boruta et al.
ENERGIES (2021)
Universal heat exchanger for air and evaporative cooling of electronics
Martin Doubek et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)
A comparison between the packed and coated finned tube for adsorption system using aluminium fumarate: Numerical study
Ibrahim Albaik et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)
The Effect of Adhesive Additives on Silica Gel Water Sorption Properties
Karol Sztekler et al.
ENTROPY (2020)
Effect of fin design parameters on the performance of a two-bed adsorption chiller
Mahmoud M. Abd-Elhady et al.
INTERNATIONAL JOURNAL OF REFRIGERATION (2020)
Lab-scale sorption chiller comparison of FAM-Z02 coating and pellets
C. McCague et al.
APPLIED THERMAL ENGINEERING (2020)
High performance microchannel adsorption heat pumps
Darshan G. Pahinkar et al.
INTERNATIONAL JOURNAL OF REFRIGERATION (2020)
On the development of an innovative adsorber plate heat exchanger for adsorption heat transformation processes; an experimental and numerical study
Makram Mikhaeil et al.
ENERGY (2020)
Recent Developments in Coating Technologies for Adsorption Heat Pumps: A Review
Angela Capri et al.
COATINGS (2020)
A generalized computational model for the simulation of adsorption packed bed reactors - Parametric study of five reactor geometries for cooling applications
Giorgos Papakokkinos et al.
APPLIED ENERGY (2019)
Sorption thermal energy storage: Hybrid coating/granules adsorber design and hybrid TCM/PCM operation
Georg Engel
ENERGY CONVERSION AND MANAGEMENT (2019)
Heat transfer performance investigation on a finned tube adsorbent bed with a compound parabolic concentrator (CPC) for solar adsorption refrigeration
Chong Zhao et al.
APPLIED THERMAL ENGINEERING (2019)
An analytical design tool for sorber bed heat exchangers of sorption cooling systems
Hesam Bahrehmand et al.
INTERNATIONAL JOURNAL OF REFRIGERATION (2019)
Module integration in an adsorption cooling system
Xuan Quang Duong et al.
APPLIED THERMAL ENGINEERING (2019)
Examination of effects of operating and geometric parameters on the performance of a two-bed adsorption chiller
Mahmoud B. Elsheniti et al.
APPLIED THERMAL ENGINEERING (2019)
Adsorption bed configurations for adsorption cooling application
Sebastian Stefanski et al.
ENERGY AND FUELS 2018 (2019)
Bed configuration effects on the finned flat-tube adsorption heat exchanger performance: Numerical modeling and experimental validation
Milad Mohammadzadeh Kowsari et al.
APPLIED ENERGY (2018)
Experimental study on the effect of adsorber with three shapes of conductive material on performance of adsorption refrigeration tube using activated carbon/ethanol pair
Ali. A. Abdel Aziz et al.
APPLIED THERMAL ENGINEERING (2018)
Experimental investigation on composite adsorbent - Water pair for a solar-powered adsorption cooling system
L. Q. Zhu et al.
APPLIED THERMAL ENGINEERING (2018)
Study on the influence of adsorbent particle size and heat exchanger aspect ratio on dynamic adsorption characteristics
Sourav Mitra et al.
APPLIED THERMAL ENGINEERING (2018)
Performance evaluation of a new modular packed bed for adsorption cooling systems
Ramy H. Mohammed et al.
APPLIED THERMAL ENGINEERING (2018)
Enhancing the performance of a zeolite 13X/CaCl2-water adsorption cooling system by improving adsorber design and operation sequence
Ka Chung Chan et al.
ENERGY AND BUILDINGS (2018)
Improving the Energy Efficiency of Adsorption Chillers by Intensifying Thermal Management Systems in Sorbent Beds
Brian K. Paul et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Experimental study of the performance of a continues solar adsorption chiller using Nano-activated carbon/methanol as working pair
Shahab Edin Hamrahi et al.
SOLAR ENERGY (2018)
Optimum fin spacing of finned tube adsorber bed heat exchangers in an exhaust gas-driven adsorption cooling system
Behzad Golparvar et al.
APPLIED ENERGY (2018)
Experimental chiller with silica gel: Adsorption kinetics analysis and performance evaluation
Paulo J. Vodianitskaia et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Reduction of the heat capacity in low-temperature adsorption chillers using thermally conductive polymers as heat exchangers material
Moritz Hinze et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Preliminary study of the hybrid solar DEC NAC wall system integration in building facades in urban context
Marco Simonetti et al.
SUSTAINABILITY IN ENERGY AND BUILDINGS 2017 (2017)
Adsorption chiller using flat-tube adsorbers - Performance assessment and optimization
Zbigniew Rogala
APPLIED THERMAL ENGINEERING (2017)
A novel adsorption module with fiber heat exchangers: Performance analysis based on driving temperature differences
Ursula Wittstadt et al.
RENEWABLE ENERGY (2017)
Optimization of thermal design and geometrical parameters of a flat tube-fin adsorbent bed for automobile air-conditioning
M. Verde et al.
APPLIED THERMAL ENGINEERING (2017)
Design, realization and testing of an adsorption refrigerator based on activated carbon/ethanol working pair
A. Frazzica et al.
APPLIED ENERGY (2016)
An innovative adsorptive chiller prototype based on 3 hybrid coated/granular adsorbers
Alessio Sapienza et al.
APPLIED ENERGY (2016)
Dynamics study of ethanol adsorption on microporous activated carbon for adsorptive cooling applications
Vincenza Brancato et al.
APPLIED THERMAL ENGINEERING (2016)
Application of an embossed plate heat exchanger to adsorption chiller
S. W. Hong et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2016)
Revisiting adsorption cooling cycle from mathematical modelling to system development
W. S. Teng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
CFD Simulation and Experimental Analyses of a Copper Wire Woven Heat Exchanger Design to Improve Heat Transfer and Reduce the Size of Adsorption Beds
John White
COMPUTATION (2016)
Impact of fin spacing on temperature distribution in adsorption cooling system for vehicle A/C applications
Amiy Sharafian et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2015)
Performance Analysis of Four Types of Adsorbent Beds in a Double-Adsorber Adsorption Refrigerator
L. Q. Zhu et al.
9TH INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATION AND AIR CONDITIONING (ISHVAC) JOINT WITH THE 3RD INTERNATIONAL CONFERENCE ON BUILDING ENERGY AND ENVIRONMENT (COBEE) (2015)
Design of an innovative graphite exchanger for adsorption heat pumps and chillers
Valeria Palomba et al.
69TH CONFERENCE OF THE ITALIAN THERMAL ENGINEERING ASSOCIATION, ATI 2014 (2015)
Innovative adsorption chiller for marine applications: design and building
Giuseppe Gulli et al.
70TH CONFERENCE OF THE ITALIAN THERMAL MACHINES ENGINEERING ASSOCIATION, ATI2015 (2015)
Experimental analysis of an adsorption refrigerator with mass and heat-pipe heat recovery process
Z. S. Lu et al.
ENERGY CONVERSION AND MANAGEMENT (2012)
Reallocation of adsorption and desorption times for optimisation of cooling cycles
Yu. I. Aristov et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2012)
Heat transfer design in adsorption refrigeration systems for efficient use of low-grade thermal energy
R. Z. Wang et al.
ENERGY (2011)
Efficient adsorption refrigerators integrated with heat pipes
R. Z. Wang
APPLIED THERMAL ENGINEERING (2008)
Design and performance prediction of a novel double heat pipes type adsorption chiller for fishing boats
K. Wang et al.
RENEWABLE ENERGY (2008)
Performance study of a high efficient multifunction heat pipe type adsorption ice making system with novel mass and heat recovery processes
T. X. Li et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2007)
An advanced solid sorption chiller using SWS-1Ll
A. Freni et al.
APPLIED THERMAL ENGINEERING (2007)
Studies on cycle characteristics and application of split heat pipe adsorption ice maker
C. J. Chen et al.
ENERGY CONVERSION AND MANAGEMENT (2007)
Share Paper
