Related references
Note: Only part of the references are listed.Formation and development of cavitation in a transparent nozzle with double orifices on different planes
Jinglong Ma et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2023)
Numerical study on the influence of nozzle spray shape on spray characteristics using diesel and biofuel blends
M. H. H. Ishak et al.
BIOFUELS-UK (2021)
Experimental and numerical analysis of the spray characteristics of biodiesel-ethanol fuel blends
Limin Geng et al.
SIMULATION-TRANSACTIONS OF THE SOCIETY FOR MODELING AND SIMULATION INTERNATIONAL (2021)
Experimental study on dynamic injection behaviors of biodiesel and its blends in a common-rail injection system
Junxing Hou et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)
Optimization of the combustion chamber geometry and injection parameters on a light-duty diesel engine for emission minimization using multi-objective genetic algorithm
Ramazan Sener et al.
FUEL (2021)
Comparative study on the effects of oil viscosity on typical coatings for automotive engine components under simulated lubrication conditions
Dongshan Li et al.
DIAMOND AND RELATED MATERIALS (2021)
Exhaust determination and air-to-fuel ratio performance of end-of-life vehicles in a developing African country: A case study of Nigeria
Stephan Moonsammy et al.
TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT (2021)
Experimental study of the effects of excess air ratio on combustion and emission characteristics of the hydrogen-fueled rotary engine
Hao Meng et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Global Warming, Climate Change, and Environmental Pollution: Recipe for a Multifactorial Stress Combination Disaster
Sara Zandalinas et al.
TRENDS IN PLANT SCIENCE (2021)
Experimental investigation to control HC, CO & NOx emissions from diesel engines using diesel oxidation catalyst
V Nadanakumar et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Early oil industry disinformation on global warming
Benjamin Franta
ENVIRONMENTAL POLITICS (2021)
Effective utilization of waste plastic oil/n-hexanol in an off-road, unmodified DI diesel engine and evaluating its performance, emission, and combustion characteristics
Damodharan Dillikannan et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Algal biorefinery models with self-sustainable closed loop approach: Trends and prospective for blue-bioeconomy
S. Venkata Mohan et al.
BIORESOURCE TECHNOLOGY (2020)
Numerical simulation of the influence of fuel temperature and injection parameters on biodiesel spray characteristics
Limin Geng et al.
ENERGY SCIENCE & ENGINEERING (2020)
Spray penetration, combustion, and soot formation characteristics of the ECN Spray C and Spray D injectors in multiple combustion facilities
Noud Maes et al.
APPLIED THERMAL ENGINEERING (2020)
Algae as green energy reserve: Technological outlook on biofuel production
Susaimanickam Anto et al.
CHEMOSPHERE (2020)
Review on spray, combustion, and emission characteristics of recent developed direct-injection spark ignition (DISI) engine system with multi-hole type injector
Ziyoung Lee et al.
FUEL (2020)
Effects of fuel properties on combustion and pollutant emissions of a low temperature combustion mode diesel engine
Song Li et al.
FUEL (2020)
Algae as potential feedstock for the production of biofuels and value-added products: Opportunities and challenges
Manish Kumar et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Flash point, kinematic viscosity and refractive index: variations and correlations of biodiesel-diesel blends
Dario Alviso et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)
Spray combustion of fast pyrolysis bio-oils: Applications, challenges, and potential solutions
Mohsen Broumand et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2020)
Effects of an injector cooling jacket on combustion characteristics of compressed-ignition sprays with a gasoline-hydrogenated catalytic biodiesel blend
Tiemin Xuan et al.
FUEL (2020)
Mid-summer surface air temperature and its internal variability over China at 1.5 °C and 2 °C global warming
Yin Shu-Yue et al.
ADVANCES IN CLIMATE CHANGE RESEARCH (2020)
Projection of weather potential for winter haze episodes in Beijing by 1.5 °C and 2.0 °C global warming
Qiu Liang et al.
ADVANCES IN CLIMATE CHANGE RESEARCH (2020)
Experimental investigation of performance and emissions characteristics on single-cylinder direct-injection diesel engine with PSZ coating using radish biodiesel
Pallavi Paturu et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2020)
Analysis of ethanol and butanol direct-injection spark-ignition sprays using two-phase structured laser illumination planar imaging droplet sizing
Matthias Koegl et al.
INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS (2019)
Algal biorefinery: A sustainable approach to valorize algal-based biomass towards multiple product recovery
Rashmi Chandra et al.
BIORESOURCE TECHNOLOGY (2019)
Combined effect of influence of nano additives, combustion chamber geometry and injection timing in a DI diesel engine fuelled with ternary (diesel-biodiesel-ethanol) blends
Harish Venu et al.
ENERGY (2019)
A core correlation of spray characteristics, deposit formation, and combustion of a high-speed diesel engine fueled with Jatropha oil and diesel fuel
Anh Tuan Hoang et al.
FUEL (2019)
Effect of combustion chamber bowl geometry modification on engine performance, combustion and emission characteristics of biodiesel fuelled diesel engine with its energy and exergy analysis
V. Karthickeyan
ENERGY (2019)
The effects of the air-fuel ratio on a stationary diesel engine under dual-fuel conditions and multi-objective optimization
Jungkeun Cho et al.
ENERGY (2019)
Effects of separated swirl combustion chamber geometries on the combustion and emission characteristics of DI diesel engines
Haiqin Zhou et al.
FUEL (2019)
Primary breakup of power-law biofuel sprays in pressurized gaseous crossflow
Daokuan Jiao et al.
FUEL (2019)
On the oil-gas-solid mixed bearing between compression ring and cylinder liner under starved lubrication and high boundary pressures
Zhan Liu et al.
TRIBOLOGY INTERNATIONAL (2019)
Direct numerical simulation of primary breakup for power-law biodiesel sprays
Lianmin Zhao et al.
INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)
Effect of propanol addition on the performance and emissions characteristics of a direct injection diesel engine fuelled with waste plastic oil
S. Ravi et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2019)
Influences of engine faults on pollutant emission
Marius Toma et al.
12TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING (INTER-ENG 2018) (2019)
Lubrication adaptability to the variations of combustion modes by texturing cylinder liner in engines
Bifeng Yin et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2018)
Combined effect of combustion chamber shapes and nozzle geometry on the performance and emission characteristics of CI engine operated on Pongamia
Mahantesh M. Shivashimpi et al.
ENERGY (2018)
Effects of lateral swirl combustion chamber geometries on the combustion and emission characteristics of DI diesel engines and a matching method for the combustion chamber geometry
Xiangrong Li et al.
FUEL (2018)
Experimental study on the spray characteristics discharging from elliptical diesel nozzle at typical diesel engine conditions
Shenghao Yu et al.
FUEL (2018)
Modeling of macroscopic mineral diesel and biodiesel spray characteristics
Breda Kegl et al.
FUEL (2018)
Investigation of the effect of nozzle inlet rounding on diesel spray formation and combustion
Ozgur Oguz Taskiran
FUEL (2018)
The influence of in-nozzle cavitation on flow characteristics and spray break-up
Luka Lesnik et al.
FUEL (2018)
Dynamic spray development of 2-methylfuran compared to ethanol and isooctane under ultra-high injection pressure
Bo Wang et al.
FUEL (2018)
Experimental investigation on the effects of diesel and mahua biodiesel blended fuel in direct injection diesel engine modified by nozzle orifice diameters
M. Vijay Kumar et al.
RENEWABLE ENERGY (2018)
Study on optimal combustion strategy to improve combustion performance in a single-cylinder PCCI diesel engine with different combustion chamber geometry
Seung Hyun Yoon et al.
APPLIED THERMAL ENGINEERING (2018)
Performance, emission and combustion characteristics of an Indica diesel engine operated with Yellow Oleander (Thevetia peruviana) oil biodiesel produced through hydrodynamic cavitation method
Ashok Kumar Yadav et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2018)
Experimental study of cavitation formation and primary breakup for a biodiesel surrogate fuel (methyl butanoate) using transparent nozzle
Mingrui Wei et al.
FUEL (2017)
Effect of di-n-butyl ether blending with soybean-biodiesel on the near-nozzle spray characteristics
Chenglong Tang et al.
FUEL (2017)
Modification in combustion chamber geometry of CI engines for suitability of biodiesel: A review
Varun et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Waste Cooking Oil (WCO) Biodiesel Production Using Calcined Chalk as Heterogeneous Catalyst
Amit Pal et al.
BIOFUELS AND BIOENERGY (BICE2016) (2017)
Investigations on air-fuel mixing and flame characteristics of biodiesel fuels for diesel engine application
Joonsik Hwang et al.
APPLIED ENERGY (2017)
Investigation of internal nozzle flow, spray and combustion characteristics fueled with diesel, gasoline and wide distillation fuel (WDF) based on a piezoelectric injector and a direct injection compression ignition engine
Wenbin Yu et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical analysis of spray characteristics of dimethyl ether and diethyl ether fuel
Balaji Mohan et al.
APPLIED ENERGY (2017)
Development of a three-step hybrid simulation approach (THSA) for engine combustion investigation coupled with a multistep phenomenon soot model and energy balance analysis
Wenbin Yu et al.
APPLIED ENERGY (2017)
Experimental study on the effect of nozzle hole-to-hole angle on the near-field spray of diesel injector using fast X-ray phase-contrast imaging
Xusheng Zhang et al.
FUEL (2016)
Impact of cold conditions on diesel injection processes of biodiesel blends
P. Tinprabath et al.
RENEWABLE ENERGY (2016)
Mixed lubrication problems in the presence of textures: An efficient solution to the cavitation problem with consideration of roughness effects
Chunxing Gu et al.
TRIBOLOGY INTERNATIONAL (2016)
An investigation of engine and fuel system performance in a diesel engine operating on waste cooking oil
Yahya Ulusoy et al.
INTERNATIONAL JOURNAL OF GREEN ENERGY (2016)
In-nozzle flow and spray characteristics for mineral diesel, Karanja, and Jatropha biodiesels
Avinash Kumar Agarwal et al.
APPLIED ENERGY (2015)
Numerical investigation on transient flow and cavitation characteristic within nozzle during the oil drainage process for a high-pressure common-rail DI diesel engine
Zuo-Yu Sun et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Experimental study of cavitating flow inside vertical multi-hole nozzles with different length-diameter ratios using diesel and biodiesel
Zhixia He et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)
Influence of biodiesel and diesel fuel blends on the injection rate under cold conditions
P. Tinprabath et al.
FUEL (2015)
Microscopic imaging of the initial stage of diesel spray formation
Cyril Crua et al.
FUEL (2015)
Spray and combustion of waste cooking oil biodiesel in a compression-ignition engine
Joonsik Hwang et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2015)
Statistical Evaluation of the Corrosive Wear of Fuel Injector Elements Used in Common Rail Systems
Karol Franciszek Abramek et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2015)
Fee Waivers for Open Access Journals
Stuart Lawson
PUBLICATIONS (2015)
Numerical simulation on spray characteristics of ether fuels
Balaji Mohan et al.
CLEAN, EFFICIENT AND AFFORDABLE ENERGY FOR A SUSTAINABLE FUTURE (2015)
Effect of internal nozzle flow and thermo-physical properties on spray characteristics of methyl esters
Balaji Mohan et al.
APPLIED ENERGY (2014)
Experimental study of spray characteristics of biodiesel derived from waste cooking oil
Balaji Mohan et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
CAVITATION IN INJECTOR NOZZLE HOLES - A PARAMETRIC STUDY
Balaji Mohan et al.
ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS (2014)
Effects of blending a heavy alcohol (C20H40O with diesel in a heavy-duty compression-ignition engine
A. I. Ramirez et al.
FUEL (2014)
Biodiesel effects on transient needle motion and near-exit flow characteristics of a high-pressure diesel injector
Seoksu Moon et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2014)
Velocity measurements based on shadowgraph-like image correlations in a cavitating micro-channel flow
C. Mauger et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2014)
ATTEMPTS TO REDUCE BIODIESEL BLENDS NOX POLLUTANT EMISSIONS BY ULTRASONIC CONDITIONING
Florin Mariasiu
TRANSPORT (2014)
An investigation of transient nature of the cavitating flow in injector nozzles
Zhixia He et al.
APPLIED THERMAL ENGINEERING (2013)
Experimental investigation concerning the influence of fuel type and properties on the injection and atomization of liquid biofuels in an optical combustion chamber
J. Galle et al.
BIOMASS & BIOENERGY (2013)
Algal biomass dehydration
Kuan-Yeow Show et al.
BIORESOURCE TECHNOLOGY (2013)
Effects of internal flow in a diesel nozzle on spray combustion
Tomohiro Hayashi et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2013)
Flow properties of biodiesel: correlation between TMDSC and dynamic viscosity
S. S. Damasceno et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)
Numerical Investigation of the Effects of Biofuel Characteristics on the Injector Nozzle Erosion Process
Florin Mariasiu
TRIBOLOGY TRANSACTIONS (2013)
A Review on Atomization and Sprays of Biofuels for IC Engine Applications
Prasad Boggavarapu et al.
INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS (2013)
Numerical analysis of injector flow and spray characteristics from diesel injectors using fossil and biodiesel fuels
Michele Battistoni et al.
APPLIED ENERGY (2012)
Statistical corrosion evaluation of nozzles used in diesel CRI systems
R. A. Taflan et al.
FUEL (2012)
Experimental investigation of the effect of corrosion in two piezo driven diesel injectors
M. I. Karamangil et al.
JOURNAL OF THE ENERGY INSTITUTE (2012)
Biodiesel/mineral diesel fuel mixtures: Spray evolution and engine performance and emissions characterization
Gerardo Valentino et al.
ENERGY (2011)
Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions
Sibendu Som et al.
FUEL (2011)
Influence of biofuels on the internal flow in diesel injector nozzles
F. J. Salvador et al.
MATHEMATICAL AND COMPUTER MODELLING (2011)
Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines
S. Som et al.
COMBUSTION AND FLAME (2010)
Fuel injection characteristics and spray behavior of DME blended with methyl ester derived from soybean oil
Seung Hwan Bang et al.
FUEL (2010)
A comparison of injector flow and spray characteristics of biodiesel with petrodiesel
S. Som et al.
FUEL (2010)
Some considerations about bioethanol combustion in oil-fired boilers
Jorge Barroso et al.
FUEL PROCESSING TECHNOLOGY (2010)
Characteristics of the ignition and combustion of biodiesel fuel spray injected by a common-rail injection system for a direct-injection diesel engine
O. A. Kuti et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2010)
Nozzle flow and atomization characteristics of ethanol blended biodiesel fuel
Su Han Park et al.
RENEWABLE ENERGY (2010)
Algal capture of carbon dioxide; biomass generation as a tool for greenhouse gas mitigation with reference to New Zealand energy strategy and policy
Mike Packer
ENERGY POLICY (2009)
Experimental and numerical analysis of spray-atomization characteristics of biodiesel fuel in various fuel and ambient temperatures conditions
Su Han Park et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2009)
Cavitation within the framework of reduced description of mixed lubrication
Thomas Geike et al.
TRIBOLOGY INTERNATIONAL (2009)
Improvement of combustion and emissions in diesel engines by means of enhanced mixture formation based on flash boiling of mixed fuel
J. Senda et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2008)
Combustion characteristics of diesel sprays from equivalent nozzles with sharp and rounded inlet geometries
LC Ganippa et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2003)