4.6 Article

Organic skin layer with carboxyl and electron-withdrawing nitro groups to chemically bind with residual Li and Ni cations on single-crystal LiNi0.8Co0.1 Mn0.1O2

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

H3BO3 washed LiNi0.8Co0.1Mn0.1O2 with enhanced electrochemical performance and storage characteristics

Longzhen You et al.

Summary: A novel surface modification strategy using H3BO3 to clean the surface of NCM811 and convert residual lithium into a uniform lithium-boron compound layer improves lithium ion diffusion and electron transport, leading to higher discharge capacity and better capacity retention. With a layer of lithium-boron compounds, NCM811 becomes more resistant to corrosion by the electrolyte and shows better storage performance.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

A scalable snowballing strategy to construct uniform rGO-wrapped LiNi0.8Co0.1Mn0.1O2 with enhanced processability and electrochemical performance

Ruiqi Ning et al.

Summary: The study proposes a scalable snowballing strategy to prepare uniform rGO-coated cathode materials, with the addition of a PTCDA layer helping ensure the adhesion of graphene on the particle surface. The PG-NCM samples demonstrate superior conductivity and cycling stability, with the P1G1-NCM performing the best among all samples in terms of discharge capacity and capacity retention.

APPLIED SURFACE SCIENCE (2021)

Article Materials Science, Multidisciplinary

Different mechanical and electrochemical behavior between the two major Ni-rich cathode materials in Li-Ion batteries

Shaojun Niu et al.

Summary: Single-crystal NCM811 cathode exhibits higher capacity retention after 600 cycles, while the larger volume change of polycrystalline cathode easily induces mechanical fracture. Decreasing the charge voltage limit of the cell can alleviate the volume change and mechanical failure for polycrystalline NCM811 cathode, but at the expense of its energy density.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Energy & Fuels

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Moonsu Yoon et al.

Summary: The use of engineered polycrystalline electrodes in lithium-ion batteries is crucial for cycling stability and safety, but achieving high-quality coatings at both the primary and secondary particle levels can be challenging. A coating-and-infusion approach using cobalt boride metallic glass on a Ni-rich layered cathode has been shown to significantly enhance performance, including rate capability and cycling stability under various conditions. The success of this approach is attributed to the simultaneous suppression of microstructural degradation and side reactions, as well as the critical role of strong selective interfacial bonding in ensuring uniform reactive wetting and facilitating infusion.

NATURE ENERGY (2021)

Article Chemistry, Physical

Synthesis and Postprocessing of Single-Crystalline LiNi0.8Co0.15Al0.05O2 for Solid-State Lithium-Ion Batteries with High Capacity and Long Cycling Stability

Roberto Fantin et al.

Summary: The application of nickel-rich NCA cathode materials in solid-state lithium-ion batteries shows promise for improving energy density, stability, and safety compared to traditional liquid electrolyte batteries. Utilizing single-crystalline cathode active materials and appropriate postprocessing techniques can lead to high-performance cathodes for SSBs, with improved capacity retention and rate performance.

CHEMISTRY OF MATERIALS (2021)

Article Electrochemistry

Achieving a bifunctional conformal coating on nickel-rich cathode LiNi0.8Co0.1Mn0.1O2 with half-cyclized polyacrylonitrile

Qian Sun et al.

Summary: This study developed a simple and reproducible method to encapsulate Ni-rich cathode material with a polymer layer, which significantly improved its stability and performance, leading to a notable increase in capacity retention. This conformal coating strategy provides a potential solution for the modification of other cathode materials.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Physical

Use of Zirconium Dual-Modification on the LiNi0.8Co0.1Mn0.1O2 Cathode for Improved Electrochemical Performances of Lithium-Ion Batteries

Sung-Joo Jo et al.

Summary: The ZrO2-coated and Zr-doped LiNi0.8Co0.1Mn0.1O2 cathode demonstrates excellent electrochemical performance with high discharge capacity, good capacity retention, and extraordinary cycling stability, making it a promising candidate for advanced Li-ion batteries.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Alleviating the Storage Instability of LiNi0.8Co0.1Mn0.1O2 Cathode Materials by Surface Modification with Poly(acrylic acid)

Shiyun Peng et al.

Summary: This study successfully alleviated the negative impact of higher nickel content on the storage stability of cathode materials by developing a surface modification method. The modified materials showed improved performance under high temperature and humidity conditions.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Energy & Fuels

High-nickel layered oxide cathodes for lithium-based automotive batteries

Wangda Li et al.

NATURE ENERGY (2020)

Article Chemistry, Multidisciplinary

Enhanced Electrochemical Performance of Ni-Rich Cathode Materials with Li1.3Al0.3Ti1.7(PO4)3 Coating

Xingyu Qu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Chemistry, Physical

Problems and their origins of Ni-rich layered oxide cathode materials

Sheng S. Zhang

ENERGY STORAGE MATERIALS (2020)

Article Nanoscience & Nanotechnology

Injection of oxygen vacancies in the bulk lattice of layered cathodes

Pengfei Yan et al.

NATURE NANOTECHNOLOGY (2019)

Article Chemistry, Physical

Surface modification of LiNi0.8Co0.1Mn0.1O2 by WO3 as a cathode material for LIB

Zhanggen Gan et al.

APPLIED SURFACE SCIENCE (2019)

Article Chemistry, Physical

Improved electrochemical performances of LiNi0.8Co0.1Mn0.1O2 cathode via SiO2 coating

Seung-Hwan Lee et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Nanoscience & Nanotechnology

Accelerated Evolution of Surface Chemistry Determined by Temperature and Cycling History in Nickel-Rich Layered Cathode Materials

James D. Steiner et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Physical

Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion Batteries

Aleksandr O. Kondrakov et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Review Chemistry, Multidisciplinary

Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries

Wen Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Article Chemistry, Multidisciplinary

Development of Microstrain in Aged Lithium Transition Metal Oxides

Eung-Ju Lee et al.

NANO LETTERS (2014)

Review Chemistry, Multidisciplinary

Challenges in the development of advanced Li-ion batteries: a review

Vinodkumar Etacheri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Review Multidisciplinary Sciences

Issues and challenges facing rechargeable lithium batteries

JM Tarascon et al.

NATURE (2001)