4.7 Article

The effect of supplementary cementitious material systems on dynamic compressive properties of ultra-high performance concrete paste

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Development of waste-based concretes containing foundry sand, recycled fine aggregate, ground granulated blast furnace slag and fly ash

Aliakbar Gholampour et al.

Summary: The utilization of various replacement materials such as FA, GGBS, FS and RFA in concrete production has shown potential in reducing environmental impact and improving concrete strength. Different combinations of replacement materials affect concrete properties differently, with some maintaining elasticity and decreasing water absorption.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Hydration heat, strength and microstructure characteristics of UHPC containing blast furnace slag

Caglar Yalcinkaya et al.

Summary: The study found that GGBS replacement has a significant impact on the hydration heat and strength of UHPC, especially at higher temperatures. Strength differences are mainly evident on the first day of curing, and prolonged curing time and fiber inclusion can eliminate these differences. Additionally, GGBS replacement can improve the microstructural characteristics of UHPC.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Construction & Building Technology

Research progress on the dynamic compressive properties of ultra-high performance concrete under high strain rates

Qingliang Yu et al.

Summary: The paper presents a comprehensive analysis of various aspects of dynamic compressive properties of ultra-high performance concrete, including factors such as steel fibers, temperature, coarse aggregate, nanomaterials, size effect, and loading rate. Prediction models for dynamic strength and energy absorption are proposed, along with the exploration of a new failure mechanism.

CEMENT & CONCRETE COMPOSITES (2021)

Article Green & Sustainable Science & Technology

Sustainability and performance assessment of binary blended low-carbon concrete using supplementary cementitious materials

Jaehyun Lee et al.

Summary: This study investigated the compressive strength properties of binary blended low-carbon concrete and examined the impact of replacement ratios of ground granulated blast-furnace slag (GGBS) and fly ash (FA) on concrete strength. The results indicated that there is potential for commercialization of this type of concrete with appropriate mixing proportions.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Effectiveness of PCE superplasticizers in calcined clay blended cements

Ran Li et al.

Summary: This study found that using calcined clay in composite cements significantly increases water demand, while PCE superplasticizers have a significant impact on flow properties. The research suggests that commercially available PCE products can effectively improve the flow performance of OPC/CC blended cements.

CEMENT AND CONCRETE RESEARCH (2021)

Article Engineering, Geological

Effects of dynamic strain rate on the energy dissipation and fragment characteristics of cross-fissured rocks

Peng Feng et al.

Summary: In rock specimens containing fissures, the type of cracks, strain rate, and symmetry of the fissures all have an impact on dynamic strength and energy dissipation under dynamic conditions. The dynamic strength of rock specimens significantly increases with increasing strain rate, while the dynamic elastic modulus remains constant regardless of loading rate. Additionally, the distribution of fragment size and energy dissipation density are also affected by the characteristics of the fissures.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

Article Construction & Building Technology

Contribution of fiber orientation to enhancing dynamic properties of UHPC under impact loading

Huanghuang Huang et al.

Summary: This study found that fiber orientation significantly affects the dynamic properties of UHPC under impact loading, with dynamic compressive strength, peak strain, and energy absorption capacity increasing significantly with an increase in strain rate. Samples with predominantly perpendicular and parallel fiber orientations showed the highest and lowest dynamic properties, respectively, for a given strain rate.

CEMENT & CONCRETE COMPOSITES (2021)

Review Construction & Building Technology

Towards ternary binders involving limestone additions - A review

Yuvaraj Dhandapani et al.

Summary: This review explores the transition from portland limestone cement system to composite ternary binder systems involving limestone. The addition of limestone has the potential to improve cement properties but should be carefully controlled to avoid dilution of hydrates.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Rheological behaviour and mechanical properties of Moroccan ternary binder's Portland clinker-fly ash-limestone

Nisrine El Fami et al.

Summary: This study aimed to assess the effects of variability in binary fly ash-limestone additions on the physical and rheological properties of milled composite cements, aiming to determine an optimal proportion for industrial use. The results showed that the combination of limestone and fly ash could improve the rheological properties of the ternary cements, leading to increased compressive strengths.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Properties of self-compacting mortars using blends of limestone powder, fly ash, and zeolite powder

Abdul Faheem et al.

Summary: This study investigates the influence of limestone powder, fly ash, zeolite powder, and their blends on fresh and hardened properties of self-compacting mortars. The experimental results indicate that 20% replacement of cement with blend of limestone and zeolite powders provided the most improved response compared to other compositions.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Mechanism of rate dependent behaviour of ultra-high performance fibre reinforced concrete containing coarse aggregates under flexural loading

Shaohua Li et al.

Summary: The presence of coarse aggregates in UHPFRC significantly affects its flexural performance, with energy absorption being more rate-dependent than initial crack stress and flexural strength. At higher loading rates, there is an increase in crack propagation speed, multiple cracks, and a higher percentage of fracture across coarse aggregates. This research proposes a rate-dependent model for predicting the fracture of coarse aggregates in UHPFRC under different loading rates.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Uncovering the effect of fly ash cenospheres on the macroscopic properties and microstructure of ultra high-performance concrete (UHPC)

Rui Jing et al.

Summary: Fly ash cenosphere is used as a supplementary cementitious material in ultra high-performance concrete, enhancing workability and strength development by acting as a filler and influencing hydration products.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Mechanical

Influence of key design parameters of ultra-high performance fibre reinforced concrete on in-service bullet resistance

P. P. Li et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Eco-friendly ultra-high performance cement pastes produced with quarry wastes as alternative fillers

Paulo Ricardo de Matos et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Environmental and economical friendly ultra-high performance-concrete incorporating appropriate quarry-stone powders

Rui Yang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Construction & Building Technology

Analysis of dynamic mechanical properties of sprayed fiber-reinforced concrete based on the energy conversion principle

Lianjun Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Rheology control of ultra-high-performance concrete made with different fiber contents

Le Teng et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Construction & Building Technology

Compressive impact tests of lightweight concrete with 155-mm-diameter spilt hopkinson pressure bar

Baofeng Huang et al.

CEMENT & CONCRETE COMPOSITES (2020)

Proceedings Paper Materials Science, Multidisciplinary

Experimental investigation on optimum usage of Micro silica and GGBS for the strength characteristics of concrete

V. B. Reddy Suda et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Article Construction & Building Technology

Mechanical properties of coral concrete subjected to uniaxial dynamic compression

Linjian Ma et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Engineering, Civil

Dynamic mechanical characteristics of filling layer self-compacting concrete under impact loading

Ning Li et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)

Article Construction & Building Technology

Utilization of steel slag in ultra-high performance concrete with enhanced eco-friendliness

Xiuzhen Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content

Zemei Wu et al.

CEMENT AND CONCRETE RESEARCH (2019)

Review Construction & Building Technology

Impact resistance of fiber-reinforced concrete - A review

Doo-Yeol Yoo et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

Reactivity of supplementary cementitious materials (SCMs) in cement blends

Jurgen Skibsted et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Green & Sustainable Science & Technology

Development and properties evaluation of sustainable ultra-high performance pastes with quaternary blends

P. P. Li et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Construction & Building Technology

Effects of steel fiber content and type on dynamic compressive mechanical properties of UHPCC

G. M. Ren et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Review Construction & Building Technology

A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures

Dehui Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Effects of steel fiber and strain rate on the dynamic compressive stress-strain relationship in reactive powder concrete

Xiaomeng Hou et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Impact characterization and modelling of basalt-polypropylene fibrer-reinforced concrete containing mineral admixtures

Qiang Fu et al.

CEMENT & CONCRETE COMPOSITES (2018)

Review Construction & Building Technology

A review on split Hopkinson bar experiments on the dynamic characterisation of concrete

Mohammad Reza Khosravani et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Review Construction & Building Technology

A review on effects of limestone powder on the properties of concrete

Dehui Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Fractal Characteristics of Concrete Fragmentation under Impact Loading

Weibo Ren et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)

Review Construction & Building Technology

Review of strain rate effects for UHPC in tension

R. J. Thomas et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Effect of PCE-type superplasticizer on early-age behaviour of ultra-high performance concrete (UHPC)

P. P. Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Review Construction & Building Technology

Mechanical and structural behaviors of ultra-high-performance fiber-reinforced concrete subjected to impact and blast

Doo-Yeol Yoo et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Potential of finely ground limestone powder to benefit ultra-high performance concrete mixtures

Jedadiah F. Burroughs et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Static and dynamic compressive properties of ultra-high performance concrete (UHPC) with hybrid steel fiber reinforcements

Zemei Wu et al.

CEMENT & CONCRETE COMPOSITES (2017)

Article Construction & Building Technology

Limestone and silica powder replacements for cement: Early-age performance

Dale P. Bentz et al.

CEMENT & CONCRETE COMPOSITES (2017)

Article Construction & Building Technology

Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses

R. Yu et al.

CEMENT & CONCRETE COMPOSITES (2015)

Article Construction & Building Technology

The hydration and microstructure of ultra high-strength concrete with cement-silica fume-slag binder

Caijun Shi et al.

CEMENT & CONCRETE COMPOSITES (2015)

Article Construction & Building Technology

Flexural response of steel-fiber-reinforced concrete beams: Effects of strength, fiber content, and strain-rate

Doo-Yeol Yoo et al.

CEMENT & CONCRETE COMPOSITES (2015)

Review Construction & Building Technology

A review on ultra high performance concrete: Part I. Raw materials and mixture design

Caijun Shi et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Review Construction & Building Technology

A review on ultra high performance concrete: Part II. Hydration, microstructure and properties

Dehui Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Ternary blending of cement with fly ash microsphere and condensed silica fume to improve the performance of mortar

Y. Li et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Construction & Building Technology

Dynamic compressive behaviour of spiral steel fibre reinforced concrete in split Hopkinson pressure bar tests

Y. Hao et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete

Xudong Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Multidisciplinary Sciences

Nanoscale analysis of the morphology and surface stability of calcium carbonate polymorphs

W. Sekkal et al.

SCIENTIFIC REPORTS (2013)

Article Engineering, Civil

A Rate Dependent Stress-Strain Relationship Model for Normal, High and Ultra-High Strength Concrete

Tuan Ngo et al.

INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2013)

Article Materials Science, Composites

Static, dynamic mechanical properties and microstructure characteristics of ultra-high performance cementitious composites

Wenhua Zhang et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2012)

Article Construction & Building Technology

Effect of mineral filler type on autogenous shrinkage of self-compacting concrete

B. Craeye et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Materials Science, Multidisciplinary

Length scales and size distributions in dynamic fragmentation

Dennis E. Grady

INTERNATIONAL JOURNAL OF FRACTURE (2010)

Article Materials Science, Ceramics

Interaction Between Polycarboxylate Superplasticizers and Amorphous Ground Granulated Blast Furnace Slag

Ahmad Habbaba et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

Article Construction & Building Technology

Dynamic behaviour and visco-elastic damage model of ultra-high performance cementitious composite

Jianzhong Lai et al.

CEMENT AND CONCRETE RESEARCH (2009)

Article Materials Science, Multidisciplinary

EXPERIMENTAL AND NUMERICAL STUDIES ON DYNAMIC COMPRESSIVE BEHAVIOR OF REACTIVE POWDER CONCRETES

Yonghua Wang et al.

ACTA MECHANICA SOLIDA SINICA (2008)

Article Mechanics

Modelling of compressive behaviour of concrete-like materials at high strain rate

X. Q. Zhou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)

Article Construction & Building Technology

An overview of the fatigue behaviour of plain and fibre reinforced concrete

MK Lee et al.

CEMENT & CONCRETE COMPOSITES (2004)

Article Construction & Building Technology

Effects of densified silica fume on microstructure and compressive strength of blended cement pastes

YJ Ji et al.

CEMENT AND CONCRETE RESEARCH (2003)

Article Mechanics

About the dynamic strength enhancement of concrete-like materials in a split Hopkinson pressure bar test

QM Li et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)