4.7 Article

Effect of curing conditions on freeze-thaw resistance of geopolymer mortars containing various calcium resources

Related references

Note: Only part of the references are listed.
Review Construction & Building Technology

The role of graphene and its derivatives in modifying different phases of geopolymer composites: A review

R. S. Krishna et al.

Summary: Geopolymer composites, also known as green composites, are considered the future of the construction material industry due to their potential to enhance chemical and physical characteristics. Graphene, a 2D nanomaterial, has been identified as a key component in improving the properties of geopolymer composites.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Co-disposal of MSWI fly ash and spent caustic through alkaline-activation consolidation

Xiang Tian et al.

Summary: This study investigated spent caustic as an alkaline activator for consolidating municipal solid waste incineration fly ash, finding that spent caustic-activated mortars had higher compressive strength than NaOH-activated mortars. The presence of ettringite, C-(A)-S-H, carbonate, and organics in spent caustic-activated mortars enhanced the compressive strength. The use of spent caustic as an activator in waste management through alkaline activation was found to be cost-efficient and environmentally sustainable.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

Developing a comprehensive prediction model for compressive strength of fly ash-based geopolymer concrete (FAGC)

Vahab Toufigh et al.

Summary: Geopolymer concrete is an eco-friendly alternative to traditional concrete, but the lack of standard mix design is a major obstacle to its use in the construction industry. This study proposes a comprehensive model for predicting the compressive strength of fly ash-based geopolymer concrete, highlighting the importance of chemical compositions on the strength. The model can estimate the compressive strength of low calcium FAGC with acceptable accuracy, saving time and money in practical applications.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Visual inspection and mechanical testing of fly ash-based fibrous geopolymer composites under freeze-thaw cycles

Kasim Mermerdas et al.

Summary: The study found that the addition of fibers had a negative impact on the workability of geopolymer mortars, but increased both compressive and flexural strengths, while reducing damage from freeze-thaw cycles. The use of fibers was proven to effectively enhance the durability of geopolymer mortars against freeze-thaw cycles.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Effects of initial SiO2/Al2O3 molar ratio and slag on fly ash-based ambient cured geopolymer properties

Ayoub Dehghani et al.

Summary: This paper discusses the impact of SiO2/Al2O3 ratio and replacement materials on the properties of fly ash-based geopolymers. Results show that increasing the SiO2/Al2O3 ratio accelerates the setting of geopolymer systems but may lead to a peak and subsequent decrease in compressive strength. Furthermore, reducing the amount of replacement materials prolongs setting time and significantly reduces compressive strength.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Comparative study on the effects of rice husk ash and silica fume on the freezing resistance of metakaolin-based geopolymer

Guangwei Liang et al.

Summary: The influences of rice husk ash (RHA) and silica fume (SF) on freezing resistance were investigated in this study. It was found that both RHA and SF can improve the pore structures and freezing resistance of metakaolin-based geopolymer, with RHA showing potential filling effect and SF acting more as an active supplementary material.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Effect of silica fume on efflorescence formation and alkali leaching of alkali-activated slag

Apriany Saludung et al.

Summary: The study found that silica fume reduces the mobility of alkali in alkali-activated slag, leading to a decrease in efflorescence formation. However, almost all sodium can be leached out from the samples after immersion in water for 28 days, indicating the weak bond of sodium in the gel.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Materials Science, Multidisciplinary

Fire resistance of phosphoric acid-based geopolymer foams fabricated from metakaolin and hydrogen peroxide

Qin Shuai et al.

MATERIALS LETTERS (2020)

Article Materials Science, Multidisciplinary

Influences of SiO2, Al2O3, CaO and MgO in phase transformation of sintered kaolin-ground granulated blast furnace slag geopolymer

Noorina Hidayu Jamil et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Construction & Building Technology

Freeze-thaw resistance and seawater corrosion resistance of optimized tannery sludge/metakaolin-based geopolymer

Mantong Jin et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

The influence of Si/Al ratio on sulfate durability of metakaolin-based geopolymer

Shikun Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Assessment of geopolymer composites durability at one year age

Yurdakul Aygormez et al.

JOURNAL OF BUILDING ENGINEERING (2020)

Article Construction & Building Technology

Effect of the activator on the performance of alkali-activated slag mortars with pottery sand as fine aggregate

Zhenzhen Jiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Surface-modification of fly ash and its effect on strength and freezing resistance of slag based geopolymer

Huajun Zhu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Freeze-thaw durability of red mud slurry-class F fly ash-based geopolymer: Effect of curing conditions

Mengxuan Zhao et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Freeze-thaw resistance of Class F fly ash-based geopolymer concrete

Renda Zhao et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Influence of wetting-drying curing system on the performance of fiber reinforced metakaolin-based geopolymer composites

Ahmet Ali Arslan et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Effects of mix design parameters on heat of geopolymerization, set time, and compressive strength of high calcium fly ash geopolymer

Yifeng Ling et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Thermodynamics

Microcalorimetric study of the effect of calcium hydroxide and temperature on the alkaline activation of coal fly ash

Ary A. Hoyos-Montilla et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

Article Chemistry, Physical

Effect of curing temperature on geopolymerization of metakaolin-based geopolymers

Mo Bing-hui et al.

APPLIED CLAY SCIENCE (2014)

Article Construction & Building Technology

Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash

Idawati Ismail et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Construction & Building Technology

Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition

Pradip Nath et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Materials Science, Multidisciplinary

Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive

Saengsuree Pangdaeng et al.

MATERIALS & DESIGN (2014)

Article Construction & Building Technology

Geopolymers and other alkali activated materials: why, how, and what?

John L. Provis

MATERIALS AND STRUCTURES (2014)

Article Construction & Building Technology

Freeze-thaw resistance of alkali-slag concrete based on response surface methodology

Liangcai Cai et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature

N. K. Lee et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Proceedings Paper Construction & Building Technology

Effects of Calcium Contents in Class C Fly Ash Geopolymer

Guo Xiaolu et al.

PROGRESS IN POLYMERS IN CONCRETE (2013)

Article Engineering, Chemical

Technical and commercial progress in the adoption of geopolymer cement

Jannie S. J. van Deventer et al.

MINERALS ENGINEERING (2012)

Article Construction & Building Technology

Freeze-thaw cycle test and damage mechanics models of alkali-activated slag concrete

Yawei Fu et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Construction & Building Technology

Effect of calcium silicate sources on geopolymerisation

Christina K. Yip et al.

CEMENT AND CONCRETE RESEARCH (2008)

Article Construction & Building Technology

Effects of type and dosage of alkaline activator and temperature on the properties of alkali-activated slag mixtures

Vladimir Zivica

CONSTRUCTION AND BUILDING MATERIALS (2007)

Article Materials Science, Multidisciplinary

Influence of curing schedule on the integrity of geopolymers

D. S. Perera et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Review Materials Science, Multidisciplinary

Mechanism of geopolymerization and factors influencing its development: a review

Divya Khale et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Article Construction & Building Technology

Geopolymeric materials prepared using Class F fly ash and elevated temperature curing

T Bakharev

CEMENT AND CONCRETE RESEARCH (2005)

Article Construction & Building Technology

The interface between natural siliceous aggregates and geopolymers

WKW Lee et al.

CEMENT AND CONCRETE RESEARCH (2004)

Article Engineering, Environmental

The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers

JGS van Jaarsveld et al.

CHEMICAL ENGINEERING JOURNAL (2002)

Article Construction & Building Technology

Preliminary study on combined-alkali-slag paste materials

YD Li et al.

CEMENT AND CONCRETE RESEARCH (2000)