Related references
Note: Only part of the references are listed.Combined impact of carbonation and crack width on the Chloride Penetration and Corrosion Resistance of Concrete Structures
Abbas S. AL-Ameeri et al.
CEMENT & CONCRETE COMPOSITES (2021)
Chloride-initiated corrosion in alkali activated reinforced concrete
P. S. Mangat et al.
CEMENT & CONCRETE COMPOSITES (2021)
Significance of properly proportioned fly ash based blended cement for sustainable concrete structures of tannery industry
Samira Mahmud et al.
STRUCTURES (2021)
Effect of fly ash and superabsorbent polymer on concrete self-healing ability
Pattharaphon Chindasiriphan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Corrosion assessment of reinforced concrete structures exposed to chloride environments in underground tunnels: Theoretical insights and practical data interpretations
Chen Li et al.
CEMENT & CONCRETE COMPOSITES (2020)
Combined effect of binder type and target mix-design parameters in delaying corrosion initiation time of concrete
Bayezid Baten et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Understanding the sulfate attack of Portland cement-based materials exposed to applied electric fields: Mineralogical alteration and migration behavior of ionic species
Chen Li et al.
CEMENT & CONCRETE COMPOSITES (2020)
Assessment of Progressive Collapse Proneness of Existing Typical Garment Factory Buildings in Bangladesh
Tanvir Manzur et al.
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2020)
Masonry chips aggregate as internal curing medium: A cost effective alternative to counteract improper curing conditions
Bayezid Baten et al.
MATERIALS TODAY-PROCEEDINGS (2020)
The impacts of policies to reduce CO2 emissions within the concrete supply chain
James Di Filippo et al.
CEMENT & CONCRETE COMPOSITES (2019)
Exponentially aging functions coupled with time-dependent chloride transport model for predicting service life of surface-treated concrete in tidal zone
Aruz Petcherdchoo et al.
CEMENT AND CONCRETE RESEARCH (2019)
Preparation and characterization of autolytic mineral microsphere for self-healing cementitious materials
Zhengwu Jiang et al.
CEMENT & CONCRETE COMPOSITES (2019)
Phenomenological model for quantifying concrete chloride diffusion coefficient
S. E. Chidiac et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Randomness of bidirectional chloride corrosion of sluice gate and time to corrosion initiation of reinforcement in a strong tidal environment
Yurong Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Delaying time to corrosion initiation in concrete using brick aggregate as internal curing medium under adverse curing conditions
A. T. M. Masum et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Influence of crack width, cover depth and concrete quality on corrosion of steel in HPC containing corrosion inhibiting admixtures and fly ash
H. Z. Lopez-Calvo et al.
CEMENT & CONCRETE COMPOSITES (2018)
Application of sensitivity analysis in the life cycle design for the durability of reinforced concrete structures in the case of XC4 exposure class
T. A. Van-Loc et al.
CEMENT & CONCRETE COMPOSITES (2018)
Chloride diffusivity, chloride threshold, and corrosion initiation in reinforced alkali-activated mortars: Role of calcium, alkali, and silicate content
M. Babaee et al.
CEMENT AND CONCRETE RESEARCH (2018)
Corrosion behavior of concrete mixes with masonry chips as coarse aggregate
Tanvir Manzur et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Influence of matrix cracking and hybrid fiber reinforcement on the corrosion initiation and propagation behaviors of reinforced concrete
Wilson Nguyen et al.
CORROSION SCIENCE (2018)
Challenges and opportunities in corrosion of steel in concrete
Ueli M. Angst
MATERIALS AND STRUCTURES (2018)
Probabilistic evaluation method for corrosion risk of steel reinforcement based on concrete resistivity
Bo Yu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Depassivation time estimation in reinforced concrete structures exposed to chloride ingress: A probabilistic approach
G. de Vera et al.
CEMENT & CONCRETE COMPOSITES (2017)
Methodology of calculating required chloride diffusion coefficient for intended service life as function of concrete cover in reinforced marine structures
H. Justnes et al.
CEMENT & CONCRETE COMPOSITES (2016)
Chloride-induced corrosion of steel in cracked concrete - Part I: Experimental studies under accelerated and natural marine environments
M. Otieno et al.
CEMENT AND CONCRETE RESEARCH (2016)
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
Erdogan Ozbay et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Readily implementable techniques can cut annual CO2 emissions from the production of concrete by over 20%
Sabbie A. Miller et al.
ENVIRONMENTAL RESEARCH LETTERS (2016)
Reliability assessment of deteriorating reinforced concrete structures by representing the coupled effect of corrosion initiation and progression by Bayesian networks
J. Hackl et al.
STRUCTURAL SAFETY (2016)
Determination of the chloride diffusion coefficient in blended cement mortars
V. Elfmarkova et al.
CEMENT AND CONCRETE RESEARCH (2015)
Carbonation-Induced and Chloride-Induced Corrosion in Reinforced Concrete Structures
Y. Zhou et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)
Comparative studies of experimental and numerical techniques in measurement of corrosion rate and time-to-corrosion-initiation of rebar in concrete in marine environments
Mandi Valipour et al.
CEMENT & CONCRETE COMPOSITES (2014)
Service life prediction of RC structures based on correlation between electrochemical and gravimetric reinforcement corrosion rates
Saeid A. Alghamdi et al.
CEMENT & CONCRETE COMPOSITES (2014)
Comparison of carbonation depths measured on in-field exposed existing r.c. structures with predictions made using fib-Model Code 2010
Matteo Guiglia et al.
CEMENT & CONCRETE COMPOSITES (2013)
Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete
Ping Duan et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Probabilistic modeling of chloride-induced corrosion in concrete structures using first- and second-order reliability methods
Bassem Saassouh et al.
CEMENT & CONCRETE COMPOSITES (2012)
Probabilistic assessment to predict the time to corrosion of steel in reinforced concrete tunnel box exposed to sea water
Ha-Won Song et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Determination of diffusion coefficient of chloride in concrete using Warburg diffusion coefficient
R. Vedalakshmi et al.
CORROSION SCIENCE (2009)
Service life prediction of concrete wharves with early-aged crack: Probabilistic approach for chloride diffusion
Seung Jun Kwon et al.
STRUCTURAL SAFETY (2009)
A model for prediction of time from corrosion initiation to corrosion cracking
Tamer El Maaddawy et al.
CEMENT & CONCRETE COMPOSITES (2007)
Correlation between porosity, permeability and ultrasonic parameters of mortar with variable water/cement ratio and water content
Z Lafhaj et al.
CEMENT AND CONCRETE RESEARCH (2006)
Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques
MF Montemor et al.
CEMENT & CONCRETE COMPOSITES (2003)
Share Paper
