Related references
Note: Only part of the references are listed.Synergistic effects of hygrothermal conditions and solar ultraviolet radiation on the properties of structural particulate-filled epoxy polymer coatings
Mojdeh Mehrinejad Khotbehsara et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Investigation on the physical, mechanical and microstructural properties of epoxy polymer matrix with crumb rubber and short fibres for composite railway sleepers
Peng Yu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Durability of epoxy polymer and ordinary cement concrete in aggressive environments
Pedram Ghassemi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects
Wahid Ferdous et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Victor C. Li et al.
CEMENT AND CONCRETE RESEARCH (2020)
Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction
Arun R. Arunothayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Investigation of mechanical characteristics of GFRP composites produced from chopped glass fiber and application of taguchi methods to turning operations
Yahya Hisman Celik et al.
SN APPLIED SCIENCES (2020)
Eco-friendly polymers mortar for floor covering based on dredged sediments of the north of France
Ilyas Ennahal et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2019)
Performance characteristics of micro fiber-reinforced geopolymer mortars for repair
Aamer Bhutta et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Tensile performance of eco-friendly ductile geopolymer composites (EDGC) incorporating different micro-fibers
Mohammed Farooq et al.
CEMENT & CONCRETE COMPOSITES (2019)
FRP fibre-cementitious matrix interfacial bond under time-dependent loading
Mohammed Farooq et al.
MATERIALS AND STRUCTURES (2019)
Very ductile polymer concrete using carbon nanotubes
AlaEddin Douba et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of basalt, silica sand and fly ash on the mechanical properties of quaternary polymer concretes
M. Hassani Niaki et al.
BULLETIN OF MATERIALS SCIENCE (2018)
Experimental study on the mechanical and thermal properties of basalt fiber and nanoclay reinforced polymer concrete
M. Hassani Niaki et al.
COMPOSITE STRUCTURES (2018)
An innovative FRP fibre for concrete reinforcement: Production of fibre, micromechanics, and durability
Mohammed Farooq et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Optimizing the mixture design of polymer concrete: An experimental investigation
Khashayar Jafari et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Tensile behavior and microstructure of hybrid fiber ambient cured one-part engineered geopolymer composites
Yazan Alrefaei et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Statistical Analysis of 3-Point Bending Properties of Polymer Concretes Made From Marble Powder Waste, Sand Grains, and Polyester Resin
N. Benzannache et al.
MECHANICS OF COMPOSITE MATERIALS (2018)
A study on mechanical properties of polymer concrete containing electronic plastic waste
H. Alperen Bulut et al.
COMPOSITE STRUCTURES (2017)
Biogenic deterioration of concrete and its mitigation technologies
Tahereh Noeiaghaei et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Flexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibers
Aamer Bhutta et al.
CEMENT & CONCRETE COMPOSITES (2017)
Mechanical Properties of Epoxy Resin Mortar with Sand Washing Waste as Filler
Dinberu Molla Yemam et al.
MATERIALS (2017)
Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review
Doo-Yeol Yoo et al.
CEMENT & CONCRETE COMPOSITES (2016)
Matrix design of strain hardening fiber reinforced engineered geopolymer composite
Behzad Nematollahi et al.
COMPOSITES PART B-ENGINEERING (2016)
Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers
Wahid Ferdous et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Investigation of mechanical/dynamic properties of carbon fiber reinforced polymer concrete for low noise railway slab
Eun-Beom Jeon et al.
COMPOSITE STRUCTURES (2015)
Characterization of compliant polymer concretes for rapid repair of runways
In-Taek Roh et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Engineered cementitious composites for strengthening masonry infilled reinforced concrete frames
Ayoub Dehghani et al.
ENGINEERING STRUCTURES (2015)
Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading
K. Wille et al.
CEMENT & CONCRETE COMPOSITES (2014)
Evaluation of mechanical properties of polymer concretes for the rapid repair of runways
Kyung-Chae Jung et al.
COMPOSITES PART B-ENGINEERING (2014)
Application of Engineered Cementitious Composites (ECC) in interior beam-column connections for enhanced seismic resistance
Salahuddin Qudah et al.
ENGINEERING STRUCTURES (2014)
A novel polymer concrete made with recycled glass aggregates, fly ash and metakaolin
Kou Shi-Cong et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Concrete-like polymer composites with fly ashes - Comparative study
Andrzej Garbacz et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
The effects of waste glass powder usage on polymer concrete properties
Mehmet Saribiyik et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Novel cement-based composites for the strengthening and repair of concrete structures
Viktor Mechtcherine
CONSTRUCTION AND BUILDING MATERIALS (2013)
Effect of fly ash on the behaviour of polymer concrete with different types of resin
Weena Lokuge et al.
MATERIALS & DESIGN (2013)
THE INFLUENCE OF CRUDE OIL PRODUCTS ON RC STRUCTURE DESTRUCTION
Tomasz Z. Blaszczynski
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2011)
Strain-hardening UHP-FRC with low fiber contents
Kay Wille et al.
MATERIALS AND STRUCTURES (2011)
A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties
L. C. Hollaway
CONSTRUCTION AND BUILDING MATERIALS (2010)
Comparison of Mechanical Properties for Polymer Concrete with Different Types of Filler
Marinela Barbuta et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2010)
Mechanical characterization of polymer mortars exposed to degradation solutions
J. M. L. Reis
CONSTRUCTION AND BUILDING MATERIALS (2009)
Mechanical properties of polymer concrete made with recycled PET and recycled concrete aggregates
Byung-Wan Jo et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Mechanical properties of nano-MMT reinforced polymer composite and polymer concrete
Byung-Wan Jo et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Toughness enhancement in steel fiber reinforced concrete through fiber hybridization
N. Banthia et al.
CEMENT AND CONCRETE RESEARCH (2007)
Comparative assessment of isophtalic and orthophtalic polyester polymer concrete: Different costs, similar mechanical properties and durability
J. P. Gorninski et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)
Fracture and flexural characterization of natural fiber-reinforced polymer concrete
J. M. L. Reis
CONSTRUCTION AND BUILDING MATERIALS (2006)
Mixed-mode fracture behavior of glass fiber reinforced polymer concrete
A Avci et al.
CEMENT AND CONCRETE RESEARCH (2005)
Assessment of fracture properties of epoxy polymer concrete reinforced with short carbon and glass fibers
JML Reis et al.
CONSTRUCTION AND BUILDING MATERIALS (2004)
Optimization of mechanical properties of polymer concrete and mix design recommendation based on design of experiments
M Muthukumar et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Study of the modulus of elasticity of polymer concrete compounds and comparative assessment of polymer concrete and portland cement concrete
JP Gorninski et al.
CEMENT AND CONCRETE RESEARCH (2004)
Properties of polymer concrete using fly ash
KS Rebeiz et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2004)
Fiber-reinforced polymer composites for construction-state-of-the-art review
CE Bakis et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2002)
Measuring and modifying interface properties of PVA fibers in ECC matrix
C Redon et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2001)
Repair of corrosion-damaged columns with FRP wraps
SJ Pantazopoulou et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2001)
Repair and retrofit with engineered cementitious composites
VC Li et al.
ENGINEERING FRACTURE MECHANICS (2000)
Share Paper
