4.7 Article

Research on in-situ corrosion process monitoring and evaluation of reinforced concrete via ultrasonic guided waves

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Comparative studies on passivation and corrosion behaviors of two types of steel bars in simulated concrete pore solution

Yamei Cai et al.

Summary: The study showed that B500 stirrups exhibited better corrosion behavior and had a higher chloride threshold value, making them more suitable for use in severe service environments.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Materials Science, Ceramics

Piezoelectric properties and microstructure of ceramicrete-based piezoelectric composites

Weijian Ding et al.

Summary: In this study, a Ceramicrete-based piezoelectric composite utilizing magnesium potassium phosphate cement as the matrix and lead zirconate titanate particle as the functional phase was proposed. Results showed that the piezoelectric performance increased with the size of the piezoelectric ceramic particles, and aging of the composite was attributed to continuous hydration. Overall, the composites exhibited high piezoelectric performance and showed promise as a sensing element material.

CERAMICS INTERNATIONAL (2021)

Review Chemistry, Analytical

Cement-Based Piezoelectric Ceramic Composites for Sensing Elements: A Comprehensive State-of-the-Art Review

Weijian Ding et al.

Summary: This review paper provides a comprehensive overview of recent advances in cement-based piezoelectric composites in infrastructural health monitoring, highlighting their durability, sensitivity, and compatibility. It addresses the critical issues of materials and fabrication process on the final performance, while also emphasizing the need for further research in experimental and simulation, materials, fabrication technique, and application.

SENSORS (2021)

Article Construction & Building Technology

An experimental assessment of corrosion damage and bending capacity reduction of singly reinforced concrete beams subjected to accelerated corrosion

Hussein Nasser et al.

Summary: This study investigates the structural behavior of corroded concrete beams and reveals the relationship between corrosion damage and failure mechanisms; corrosion crack width is identified as a good indicator of the corrosion level; the interaction between bond deterioration and cross-section loss distribution has an impact on bending behavior.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Materials Science, Multidisciplinary

Influence of hydration capacity for cement matrix on the piezoelectric properties and microstructure of cement-based piezoelectric ceramic composites

Weijian Ding et al.

Summary: In this study, the piezoelectric properties and microstructure of cement-based piezoelectric ceramic composites (CPCs) were investigated. The hydration capacity of the cement matrix was found to have an impact on the piezoelectric properties, with the piezoelectric strain factor of hydrated cement-based composites showing a decreasing trend with age. The morphology and product structure of the composites after curing and polarization were significantly different, with the interfacial transition zone of the fresh cement-based composite differing from the hydrated cement-based composite due to insufficient binding between CSH and PZT.

MATERIALS CHARACTERIZATION (2021)

Article Construction & Building Technology

Investigation of novel embedded piezoelectric ultrasonic transducers on crack and corrosion monitoring of steel bar

Peng Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Sensitivity of longitudinal guided wave modes to pitting corrosion of rebars embedded in reinforced concrete

Rajeshwara Chary Sriramadasu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Identification of corrosion products and 3D distribution in reinforced concrete using X-ray micro computed tomography

Guohao Fang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Assessing the bond behaviour of corroded smooth and ribbed rebars with acoustic emission monitoring

Charlotte Van Steen et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Materials Science, Characterization & Testing

Corrosion detection in steel bar: A time-frequency approach

Subhra Majhi et al.

NDT & E INTERNATIONAL (2019)

Article Materials Science, Characterization & Testing

Detection and assessment of pitting corrosion in rebars using scattering of ultrasonic guided waves

Rajeshwara Chary Sriramadasu et al.

NDT & E INTERNATIONAL (2019)

Article Construction & Building Technology

Chemical self-healing system with novel microcapsules for corrosion inhibition of rebar in concrete

Biqin Dong et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Construction & Building Technology

3D visualized tracing of rebar corrosion-inhibiting features in concrete with a novel chemical self-healing system

Biqin Dong et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Efficient damage inspection of deteriorated RC bridge deck with rain-induced elastic wave

Hidefumi Takamine et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Chemistry, Multidisciplinary

Feasibility Study of Steel Bar Corrosion Monitoring Using a Piezoceramic Transducer Enabled Time Reversal Method

Linsheng Huo et al.

APPLIED SCIENCES-BASEL (2018)

Article Engineering, Multidisciplinary

Influence of axial loads on the health monitoring of concrete structures using embedded piezoelectric transducers

Tiejun Liu et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2017)

Article Engineering, Electrical & Electronic

Monitoring of Corrosion-Induced Degradation in Prestressed Concrete Structure Using Embedded Piezoceramic-Based Transducers

Tianyong Jiang et al.

IEEE SENSORS JOURNAL (2017)

Article Materials Science, Characterization & Testing

Embedded PZT Sensor for Monitoring Mechanical Impedance of Hydrating Cementitious Materials

Arun Narayanan et al.

JOURNAL OF NONDESTRUCTIVE EVALUATION (2017)

Article Construction & Building Technology

Practical issues related to the application of piezoelectric based wave propagation technique in monitoring of concrete curing

Yee Yan Lim et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Effect of fine crack width and water cement ratio of SHCC on chloride ingress and rebar corrosion

Koichi Kobayashi et al.

CEMENT & CONCRETE COMPOSITES (2017)

Article Construction & Building Technology

Probabilistic evaluation method for corrosion risk of steel reinforcement based on concrete resistivity

Bo Yu et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

In-situ crack propagation monitoring in mortar embedded with cement-based piezoelectric ceramic sensors

Haijun Zhou et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Mechanics

Detection of crack propagation in concrete with embedded ultrasonic sensors

J. Wolf et al.

ENGINEERING FRACTURE MECHANICS (2015)

Article Instruments & Instrumentation

A new smart traffic monitoring method using embedded cement-based piezoelectric sensors

Jinrui Zhang et al.

SMART MATERIALS AND STRUCTURES (2015)

Article Engineering, Multidisciplinary

Detection and quantification of diameter reduction due to corrosion in reinforcing steel bars

Umar Amjad et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2015)

Article Computer Science, Information Systems

Corrosion Monitoring and Evaluation of Reinforced Concrete Structures Utilizing the Ultrasonic Guided Wave Technique

Dongsheng Li et al.

INTERNATIONAL JOURNAL OF DISTRIBUTED SENSOR NETWORKS (2014)

Article Materials Science, Multidisciplinary

Characterization of steel corrosion in mortar by various electrochemical and physical techniques

Ales Cesen et al.

CORROSION SCIENCE (2013)

Article Construction & Building Technology

Monitoring of cement hydration reaction process based on ultrasonic technique of piezoelectric composite transducer

Xu Dongyu et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Materials Science, Multidisciplinary

Reinforcement corrosion-induced cover cracking and its time prediction for reinforced concrete structures

Chunhua Lu et al.

CORROSION SCIENCE (2011)

Review Construction & Building Technology

Critical chloride content in reinforced concrete - A review

Ueli Angst et al.

CEMENT AND CONCRETE RESEARCH (2009)

Article Construction & Building Technology

Quantitative Interpretation of Half-Cell Potential Measurements in Concrete Structures

Mohammad Pour-Ghaz et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2009)

Article Engineering, Multidisciplinary

Longitudinal guided waves for monitoring corrosion in reinforced mortar

Benjamin L. Ervin et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2008)

Article Instruments & Instrumentation

Monitoring of cement hydration using embedded piezoelectric transducers

Lei Qin et al.

SMART MATERIALS & STRUCTURES (2008)

Article Instruments & Instrumentation

On the study of surface wave propagation in concrete structures using a piezoelectric actuator/sensor system

F. Song et al.

SMART MATERIALS & STRUCTURES (2008)

Article Construction & Building Technology

Corrosion rate of ordinary and high-performance concrete subjected to chloride attack by AC impedance spectroscopy

M Ismail et al.

CONSTRUCTION AND BUILDING MATERIALS (2006)

Article Construction & Building Technology

Limitations of the linear polarization method to determine stainless steel corrosion rate in concrete environment

M Kouril et al.

CEMENT & CONCRETE COMPOSITES (2006)

Article Construction & Building Technology

Corrosion by chlorides in reinforced concrete:: Determination of chloride concentration threshold by impedance spectroscopy

O Poupard et al.

CEMENT AND CONCRETE RESEARCH (2004)