Related references
Note: Only part of the references are listed.Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems
Mohammad Balapour et al.
CEMENT & CONCRETE COMPOSITES (2020)
A micro-mechanical model for unsaturated soils based on DEM
Xin Liu et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Influence of SAP on the chloride penetration and corrosion behavior of steel bar in concrete
Jin Zuquan et al.
CORROSION SCIENCE (2020)
A review of mechanical properties of fibre reinforced concrete at elevated temperatures
Heyang Wu et al.
CEMENT AND CONCRETE RESEARCH (2020)
Influence of super absorbent polymers on early-age behavior and tensile creep of internal curing high strength concrete
Dejian Shen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The use of rice husk ash as reactive filler in ultra-high performance concrete
Sung-Hoon Kang et al.
CEMENT AND CONCRETE RESEARCH (2019)
Recycled ceramic waste high strength concrete containing wollastonite particles and micro-silica: A comprehensive experimental study
Seyed Alireza Zareei et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Design methodology and mechanical properties of Superabsorbent Polymer (SAP) cement-based materials
Beibei Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A review on the use of LWA as an internal curing agent of high performance cement-based materials
Xianwei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Perforated cenospheres: A reactive internal curing agent for alkali activated slag mortars
Peiyuan Chen et al.
CEMENT & CONCRETE COMPOSITES (2019)
Comparative study of pozzolanic and filler effect of rice husk ash on the mechanical properties and microstructure of brick aggregate concrete
Md Abu Noaman et al.
HELIYON (2019)
Hydration kinetics of high-strength concrete with untreated coal bottom ash for internal curing
H. K. Kim et al.
CEMENT & CONCRETE COMPOSITES (2018)
Internal curing of pervious concrete using lightweight aggregates
John T. Kevern et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Converting hollow fly ash into admixture carrier for concrete
Peiyuan Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Enhancing mechanical and durability properties of recycled aggregate concrete
George Dimitriou et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effects of pore structure and water absorption on internal curing efficiency of porous aggregates
Dinghua Zou et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Replacement of silica fume with thermally treated rice husk ash in Reactive Powder Concrete
M. Vigneshwari et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Influence of internal curing on the pore size distribution of high strength concrete
Joo Hyung Kim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
An overview on the effect of internal curing on shrinkage of high performance cement-based materials
Jianhui Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Influence of water to cement ratio on the efficiency of internal curing of high-performance concrete
Semion Zhutovsky et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Super absorbent polymers (SAPs) as physical air entrainment in cement mortars
Siamak Riyazi et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Assessing benefits of pre-soaked recycled concrete aggregate on variably cured concrete
Daniel Pickel et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Internal curing of high performance concrete using cenospheres
Fengjuan Liu et al.
CEMENT AND CONCRETE RESEARCH (2017)
Early-age tensile creep and cracking potential of concrete internally cured with pre-wetted lightweight aggregate
Dejian Shen et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effects of SAP on the properties and pore structure of high performance cement-based materials
Xianwei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Capillary water retention curve and shear strength of unsaturated soils
Annan Zhou et al.
CANADIAN GEOTECHNICAL JOURNAL (2016)
Internal curing of high performance mortars with bottom ash
Mateusz Wyrzykowski et al.
CEMENT & CONCRETE COMPOSITES (2016)
Effect of lightweight aggregate type on early-age autogenous shrinkage of concrete
Yi-zhou Zhuang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Introducing an effective curing method for mortar containing high volume cementitious materials
Evi Aprianti et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of internal curing with super absorbent polymers on residual stress development and stress relaxation in restrained concrete ring specimens
Dejian Shen et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Suitability of polyacrylamide superabsorbent polymers as the internal curing agent of well cement
Huajie Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effects of using recycled concrete aggregates on the shrinkage of high performance concrete
Andreu Gonzalez-Corominas et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
High-performance fiber-reinforced concrete: a review
Vahid Afroughsabet et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Chloride migration in concrete with superabsorbent polymers
Marianne Tange Hasholt et al.
CEMENT & CONCRETE COMPOSITES (2015)
Durability assessment of high-performance concrete with SRAs and FLWAs
Tyler Deboodt et al.
CEMENT & CONCRETE COMPOSITES (2015)
Effects of nano and micro size of CaO and MgO, nano-clay and expanded perlite aggregate on the autogenous shrinkage of mortar
Riza Polat et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Prediction of Chloride Ion Penetration of Recycled Aggregate Concrete
Rui Vasco Silva et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
Rice husk ash as both pozzolanic admixture and internal curing agent in ultra-high performance concrete
Viet-Thien-An Van et al.
CEMENT & CONCRETE COMPOSITES (2014)
Tensile creep and shrinkage of SAP modified concrete
A. Assmann et al.
CEMENT AND CONCRETE RESEARCH (2014)
Internal curing with lightweight aggregate produced from biomass-derived waste
Pietro Lura et al.
CEMENT AND CONCRETE RESEARCH (2014)
Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates
A. Gonzalez-Corominas et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Assessment of early-age autogenous shrinkage strains in concrete using bentonite clay as internal curing technique
Salman Afzal et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50
D. Snoeck et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of internal curing on internal relative humidity and shrinkage of high strength concrete slabs
Yudong Han et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test
Viktor Mechtcherine et al.
MATERIALS AND STRUCTURES (2014)
The effect of Superabsorbent Polymers (SAP) on microstructure and mechanical properties of fly ash cementitious mortars
Agnieszka J. Klemm et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Mesoporous structure and pozzolanic reactivity of rice husk ash in cementitious system
Viet-Thien-An Van et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
An investigation on the use of zeolite aggregates for internal curing of concrete
Sadegh Ghourchian et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Reuse of sanitary ceramic wastes as coarse aggregate in eco-efficient concretes
C. Medina et al.
CEMENT & CONCRETE COMPOSITES (2012)
Application of internal curing for mixtures containing high volumes of fly ash
Igor De la Varga et al.
CEMENT & CONCRETE COMPOSITES (2012)
Modeling of water permeability in early aged concrete with cracks based on micro pore structure
Sang-Soon Park et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Micromechanical modeling on autogenous and drying shrinkages of concrete
Jun Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
The influence of the initial moisture content of lightweight aggregate on internal curing
Michael Golias et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Concrete Containing Natural Pozzolans: New Challenges for Internal Curing
Gaston Espinoza-Hijazin et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)
Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures
Javier Castro et al.
CEMENT & CONCRETE COMPOSITES (2011)
Revisiting the protected paste volume concept for internal curing of high-strength concretes
Semion Zhutovsky et al.
CEMENT AND CONCRETE RESEARCH (2011)
Hydration and microstructure of ultra high performance concrete incorporating rice husk ash
Nguyen Van Tuan et al.
CEMENT AND CONCRETE RESEARCH (2011)
Lightweight concrete incorporating pumice based blended cement and aggregate: Mechanical and durability characteristics
K. M. A. Hossain et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete
Xuemei Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks
Bart Craeye et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Experimental and Theoretical Studies on Autogenous Shrinkage of Concrete at Early Ages
Zhang Jun et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2011)
Chloride Ion Penetration in Stressed Concrete
Li Guoping et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2011)
Permeability of high-performance concrete incorporating presoaked lightweight aggregates for internal curing
X. Liu et al.
MAGAZINE OF CONCRETE RESEARCH (2010)
Utilization of power plant bottom ash as aggregates in fiber-reinforced cellular concrete
H. K. Lee et al.
WASTE MANAGEMENT (2010)
Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions
Ryan Henkensiefken et al.
CEMENT & CONCRETE COMPOSITES (2009)
Comparison of two processes for treating rice husk ash for use in high performance concrete
Andres Salas et al.
CEMENT AND CONCRETE RESEARCH (2009)
Use of porous ceramic waste aggregates for internal curing of high-performance concrete
Masahiro Suzuki et al.
CEMENT AND CONCRETE RESEARCH (2009)
Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete
Burcu Akcay et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Mechanical properties of brick aggregate concrete
Paulo B. Cachim
CONSTRUCTION AND BUILDING MATERIALS (2009)
Structural concrete with incorporation of coarse recycled concrete and ceramic aggregates: durability performance
Marco Gomes et al.
MATERIALS AND STRUCTURES (2009)
Effects of RHA on autogenous shrinkage of Portland cement pastes
Gemma Rodriguez de Sensale et al.
CEMENT & CONCRETE COMPOSITES (2008)
Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking
Daniel Cusson et al.
CEMENT AND CONCRETE RESEARCH (2008)
A structural investigation relating to the pozzolanic activity of rice husk ashes
Deepa G. Nair et al.
CEMENT AND CONCRETE RESEARCH (2008)
Effect of crushed ceramic and basaltic pumice as fine aggregates on concrete mortars properties
Hanifi Binici
CONSTRUCTION AND BUILDING MATERIALS (2007)
Techniques and materials for internal water curing of concrete
Ole Mejlhede Jensen et al.
MATERIALS AND STRUCTURES (2006)
Concrete with ceramic waste aggregate
R Senthamarai et al.
CEMENT & CONCRETE COMPOSITES (2005)
Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates
J de Brito et al.
CEMENT & CONCRETE COMPOSITES (2005)
Study on the pozzolanic properties of rice husk ash by hydrochloric acid pretreatment
QG Feng et al.
CEMENT AND CONCRETE RESEARCH (2004)
Mitigation strategies for autogenous shrinkage cracking
DP Bentz et al.
CEMENT & CONCRETE COMPOSITES (2004)
Influence of cement paste matrix properties on the autogenous curing of high-performance concrete
S Zhutovsky et al.
CEMENT & CONCRETE COMPOSITES (2004)
The interfacial transition zone (ITZ) between cement paste and aggregate in concrete
KL Scrivener et al.
INTERFACE SCIENCE (2004)
Water-entrained cement-based materials II. Experimental observations
OM Jensen et al.
CEMENT AND CONCRETE RESEARCH (2002)
Water permeability and chloride penetrability of high-strength lightweight aggregate concrete
KS Chia et al.
CEMENT AND CONCRETE RESEARCH (2002)
Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates
A Bentur et al.
CEMENT AND CONCRETE RESEARCH (2001)
Water-entrained cement-based materials I. Principles and theoretical background
OM Jensen et al.
CEMENT AND CONCRETE RESEARCH (2001)
Characteristics and properties of lightweight concrete manufactured with cenospheres
F Blanco et al.
CEMENT AND CONCRETE RESEARCH (2000)
Share Paper
