4.7 Article

Sulphuric acid resistance of ground ferronickel slag blended fly ash geopolymer mortar

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Performance of fly ash concrete with ferronickel slag fine aggregate against alkali-silica reaction and chloride diffusion

Quang Dieu Nguyen et al.

Summary: This study confirmed the significant potential of concrete containing 50% FNS sand and 25% fly ash, which can be used not only as a low-carbon concrete with comparable mechanical properties to conventional concrete, but also with better performance against ASR and chloride contamination.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Fresh and hardened properties of geopolymer binder using ground high magnesium ferronickel slag with fly ash

Jhutan Chandra Kuri et al.

Summary: The study evaluated the effect of using GFNS with fly ash in geopolymers, showing that GFNS can accelerate reaction rates, reduce setting time, and increase compressive strength. SEM images and EDS analysis indicated that the application of GFNS does not affect soundness, while the N-M-A-S-H gel contributes to the strength development of geopolymers.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Sustainable use of ferronickel slag in cementitious composites and the effect on chloride penetration resistance

Yuning Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Multidisciplinary

Corrosion investigation of fly ash based geopolymer mortar in natural sewer environment and sulphuric acid solution

Hammad A. Khan et al.

CORROSION SCIENCE (2020)

Review Green & Sustainable Science & Technology

Fabrication and engineering properties of concretes based on geopolymers/alkali-activated binders - A review

Peng Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Construction & Building Technology

Sulphuric Acid Resistance of Cementitious Materials: Multiscale Approach to Assessing the Degradation

Lei Gu et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)

Article Construction & Building Technology

Performance of FA-based geopolymer concretes exposed to acetic and sulfuric acids

William G. Valencia-Saavedra et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Environmental Sciences

Factors affecting co-valorization of fayalitic and ferronickel slags for the production of alkali activated materials

Konstantinos Komnitsas et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Construction & Building Technology

Leaching kinetics and reactivity evaluation of ferronickel slag in alkaline conditions

Ruilin Cao et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Construction & Building Technology

Sulfate resistance of steam cured ferronickel slag blended cement mortar

Baoliang Li et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

Feasibility of ferronickel slag powder for cementitious binder in concrete mix

Hansol Kim et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Mechanical properties and durability of unconfined and confined geopolymer concrete with fiber reinforced polymers exposed to sulfuric acid

Radhwan Alzeebaree et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Durability and Microstructure Properties of Low-Carbon Concrete Incorporating Ferronickel Slag Sand and Fly Ash

Quang Dieu Nguyen et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Article Construction & Building Technology

The influence of steel slag and ferronickel slag on the properties of alkali-activated slag mortar

Nanqiao You et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Sulfuric acid resistance of one-part alkali-activated mortars

P. Sturm et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Effect of slag content and activator dosage on the resistance of fly ash geopolymer binders to sulfuric acid attack

Timothy A. Aiken et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Increasing mechanical strength and acid resistance of geopolymers by incorporating different siliceous materials

Wei Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Review Engineering, Environmental

Value added utilization of by-product electric furnace ferronickel slag as construction materials: A review

Ashish Kumer Saha et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

Article Construction & Building Technology

Acid attack on geopolymer cement mortar based on waste-glass powder and calcium aluminate cement at mild concentration

Mostafa Vafaei et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Green & Sustainable Science & Technology

Conversion of local industrial wastes into greener cement through geopolymer technology: A case study of high-magnesium nickel slag

Zuhau Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Construction & Building Technology

Durability of Geopolymer Mortar Based on Waste-Glass Powder and Calcium Aluminate Cement in Acid Solutions

Mostafa Vafaei et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)

Article Construction & Building Technology

Characteristics and reactivity of ferronickel slag powder

Yiduo Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Mapping high pH levels in hydrated calcium silicates

Engui Liu et al.

CEMENT AND CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag

Muhammad Ashiqur Rahman et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Sorptivity and acid resistance of ambient-cured geopolymer mortars containing nano-silica

Partha Sarathi Deb et al.

CEMENT & CONCRETE COMPOSITES (2016)

Article Construction & Building Technology

Influence of the slag content on the chloride and sulfuric acid resistances of alkali-activated fly ash/slag paste

N. K. Lee et al.

CEMENT & CONCRETE COMPOSITES (2016)

Article Construction & Building Technology

Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature

Pradip Nath et al.

CEMENT & CONCRETE COMPOSITES (2015)

Article Construction & Building Technology

Alkali-silica reactivity of cementitious materials using ferro-nickel slag fine aggregates produced in different cooling conditions

Young Cheol Choi et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Hydration study of ternary blended cements containing ferronickel slag and natural pozzolan

N. Lemonis et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Environmental Sciences

Utilization of Ferronickel Slag as Additive in Portland Cement: A Hydration Leaching Study

N. S. Katsiotis et al.

WASTE AND BIOMASS VALORIZATION (2015)

Article Construction & Building Technology

Geopolymer prepared with high-magnesium nickel slag: Characterization of properties and microstructure

Tao Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Environmental Sciences

Utilisation of FeNi-Slag for the Production of Inorganic Polymeric Materials for Construction or for Passive Fire Protection

Konstantinos Sakkas et al.

WASTE AND BIOMASS VALORIZATION (2014)

Article Construction & Building Technology

Sulfuric acid resistance of blended ash geopolymer concrete

M. A. M. Ariffin et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Resistance to acid and sulfate solutions of microwave-assisted high calcium fly ash geopolymer

Prinya Chindaprasirt et al.

MATERIALS AND STRUCTURES (2013)

Article Construction & Building Technology

Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack

Vanchai Sate et al.

CEMENT & CONCRETE COMPOSITES (2012)

Article Construction & Building Technology

Acid resistance of inorganic polymer binders. 1. Corrosion rate

Redmond R. Lloyd et al.

MATERIALS AND STRUCTURES (2012)

Article Construction & Building Technology

Resistance to acid attack, abrasion and leaching behavior of alkali-activated mine waste binders

Pacheco-Torgal Fernando et al.

MATERIALS AND STRUCTURES (2011)

Article Engineering, Environmental

Effect of synthesis parameters on the compressive strength of low-calcium ferronickel slag inorganic polymers

Kostas Komnitsas et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Article Engineering, Chemical

Synthesis of ferronickel slag-based geopolymers

Ioannis Maragkos et al.

MINERALS ENGINEERING (2009)

Article Materials Science, Multidisciplinary

Geopolymerisation of low calcium ferronickel slags

K. Komnitsas et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Review Materials Science, Multidisciplinary

Geopolymer technology:: the current state of the art

P. Duxson et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Article Construction & Building Technology

The experimental investigation of concrete carbonation depth

Cheng-Feng Chang et al.

CEMENT AND CONCRETE RESEARCH (2006)

Article Construction & Building Technology

Effect of geopolymer cement on microstructure, compressive strength and sulphuric acid resistance of concrete

E. Hewayde et al.

MAGAZINE OF CONCRETE RESEARCH (2006)

Article Construction & Building Technology

Resistance of geopolymer materials to acid attack

T Bakharev

CEMENT AND CONCRETE RESEARCH (2005)

Article Construction & Building Technology

Resistance of alkali-activated slag concrete to acid attack

T Bakharev et al.

CEMENT AND CONCRETE RESEARCH (2003)